聚氨酯防水涂料

  • 网络polyurethane waterproof coating;SPU;PU-M;XG-SPU
聚氨酯防水涂料聚氨酯防水涂料
  1. 描述了聚氨酯防水涂料预聚体的快速合成生产工艺,讨论了复合催化剂、pH值、溶剂对预聚体质量的影响。

    The production technology of fast preparation of the prepolymer of polyurethane waterproof coating is described . The influence of di catalysts , pH values and solvents on the quality of prepolymer is discussed .

  2. 研究了聚氨酯防水涂料的合成,探讨了预聚体中NCO含量、固体填料和液体填料对其物理机械性能的影响。

    The synthetic of polyurethane waterproof coating is studied , and the discussed mechanic performance effected by NCO content in prepolymer , solid and liquid loading material is discussed .

  3. 在预聚体中的&NCO含量不变,轻钙和HVGO用量不变的情况下,以MOCA/EP330-N(官能团)为0.90/0.10作为混合固化剂时,可制得直接用作防水层的聚氨酯防水涂料。

    At the condition & NCO , calcium carbonate and HVGO content don 't be altered , use MOCA / EP330-N ( function group ) is 0.90/0.10 as the mixed curing agent , prepared polyurethane waterproof coating that used as the direct waterproof layer .

  4. 蓖麻油聚氨酯防水涂料的制备与性能研究

    Study on Preparation and Property of Castor Oil-Based Polyurethane Waterproof Coatings

  5. 介绍了一种单组分环保型聚氨酯防水涂料,讨论了二官能聚醚和三官能聚醚的混合比例对伸长率、拉伸强度的影响。

    An environment friendly one component polyurethane waterproof coating was presented .

  6. 卫生间聚氨酯防水涂料的特性及质量预控

    Characteristics and Quality Control of Polyurethane Waterproof Coating in Toilet Room

  7. 一线多功能聚氨酯防水涂料生产线设计与工艺控制

    Multi-function production line design and process control of polyurethane waterproofing coating

  8. 聚氨酯防水涂料拉伸性能试验影响因素分析

    On Influence Factor Analysis of Tensile Property Experiment of Polyurethane Waterproof Paint

  9. 本文介绍了改进的沥青聚氨酯防水涂料的制备方法。

    This artcle studied the improved preparation of asphalt polyurethane waterproof coating .

  10. 单组分水固化聚氨酯防水涂料的研究

    Study on single component polyurethane waterproofing coating cured by water

  11. 水固化聚氨酯防水涂料及应用性能的研究

    Preparation of Water-cured Polyurethane Waterproofing Coatings and Their Application Performances

  12. 双组分聚氨酯防水涂料中催化剂的影响

    The Effects of Catalysts Used in Two-component Polyether Polyurethane Coatings

  13. 双组份彩色聚氨酯防水涂料非汞非铅催化剂的选择

    Selection of non-mercuric and non-lead catalyst for two-component colored polyurethane waterproof coating

  14. 新型环保聚氨酯防水涂料的制备及其改性的研究环保型高性能聚氨酯防水涂料的研制

    Studies on preparation of environmentally friendly high-performance PU waterproof coating

  15. 室温固化型高强度聚氨酯防水涂料的研制

    The Study of the High Strength PU Waterproof Coating Cured at Room Temperature

  16. 论述了树脂型弹性砂浆、彩色弹性聚氨酯防水涂料的防水效能。

    The efficiency of resin elastic mortar , color TPU dope was discussed .

  17. 聚氨酯防水涂料是建筑防水材料中的一大类。

    Polyurethane waterproofing coating is a main type of material for construction waterproofing .

  18. 单组分聚氨酯防水涂料的现状和发展

    Current Situation and Development of One-Component Polyurethane Waterproof Coatings

  19. 单组分丙烯酸聚氨酯防水涂料单组分沥青基聚氨酯防水涂料的研究及应用

    The Research and Application of the Single Ingredient Asphalt-Base Polyurethane Waterproofing Coating Material

  20. 无溶剂环保型聚氨酯防水涂料的研制

    Investigation on Environmentally Sound Polyurethane Waterproof Coating without Solvent

  21. LB-IA焦油型聚氨酯防水涂料

    LB - IA Tar Type Polyurethane Waterproof Coating

  22. 沥青聚氨酯防水涂料制备工艺的改进

    Improvement of Preparation of Asphalt Polyurethane Waterproof Coating

  23. 介绍了这种单组分石油沥青聚氨酯防水涂料的性能。

    The properties of the one component asphalt based polyurethane waterproof coatings were introduced .

  24. 研究了弹性聚氨酯防水涂料合成条件及影响因素。

    Synthetic conditions and the effect factors of polyurethane elastomer waterproof coating are researched .

  25. 沥青聚氨酯防水涂料的发展概述

    General development of asphalt - polyurethane waterproof coating

  26. 聚酯废料制备聚氨酯防水涂料研究

    Waterproof PU coating preparation from waste PET

  27. 室温固化非焦油型双组分聚氨酯防水涂料

    Room-temperature Cured Non-tar Two-can Polyurethane Water-proofing Coatings

  28. 上海东方雨虹聚脲/聚氨酯防水涂料生产线设计要点

    Main points in design of polyurea & polyurethane waterproof coating production line of Shanghai Oriental Yuhong

  29. 研究了粉煤灰填充双组分聚氨酯防水涂料的效果。

    The influence of fineness of fly ash on film-forming of two-component polyurethane waterproof coating was studied .

  30. 主要介绍了外包防水层的施工技术以及聚氨酯防水涂料的刮涂工艺。

    The article describes technical know-how of outer waterproofing layer and doctor blade method for polyurethane waterproofing coating .