焊接工艺
- 网络WPS;Welding;welding technology;welding procedure;procedure
-
焊接工艺参数对镁合金CO2激光焊焊缝表面成形的影响
Effects of welding parameters on CO_ 2 laser welding of magnesium alloys
-
CO2电弧焊接工艺实践
Practice of CO_2 Arc Welding Process
-
SiCw/6061Al铝基复合材料粉末夹层瞬间液相扩散焊接工艺
Pulverous interlayer transient liquid phase bonding craft of Al-based composite SiC_w / 606Al
-
依据CO2焊接工艺的特点,设计了一种电子电抗器控制的逆变弧焊电源。
Developed a new kind of electronic inductor controlled inverter arc welding power source .
-
面向Intranet的焊接工艺计算机辅助设计系统开发
Development of welding computing aided process planning system for Intranet
-
1(1/4)Cr&(1/2)Mo耐热钢焊接工艺试验
Welding Technique Tests of 1 ( 1 / 4 ) Cr-1 / 2Mo Heat-resistant Steel
-
低碳钢CO2激光-脉冲MAG电弧复合焊接工艺研究
CO_2 laser-pulsed MAG hybrid welding of mild steel
-
当CO2含量>30%后,复合焊接工艺稳定性变差,焊缝硬度急剧降低。
Moreover , when CO2 > 30 % , the process stability and microhardness of weld dramatically decrease .
-
SiC药皮重量系数在20%时,焊条焊接工艺性最好。
When the weight factor of SiC coating is 20 % , the electrode weldability is the best .
-
不锈钢自动TIG焊焊接工艺参数
Welding Process Parameters on Stainless . Steel Automatic TIG Welding
-
介绍了不锈钢镶套的TIG焊接工艺。
This paper introduces the TIG_welding technology of repairing stainless steel casement .
-
尾翼筒机器人TIG填丝焊接工艺
Welding Technology of Robotic TIG Filling-wire for Wing of Cylinder
-
亚微米级Al2O(3p)/6061Al铝基复合材料扩散焊接工艺
Diffusion welding process of submicron aluminium matrix composite Al_2O_ ( 3p ) / 6061 Al
-
Ti/Al的交流TIG焊接工艺
Alternating current TIG welding procedure of ti / al
-
用CO2气体保护焊方法采用适当焊接工艺及焊接材料,对压榨机辊轴轴颈进行了补焊修复实验研究。
The study and experiment on the repair of roller journal CO_2 shield welding with proper welding technics has been done by us .
-
分析了逆变式脉冲TIG焊机的焊接工艺性能。
It also analyzes the welding technology characteristics of inverter pulse TIG welding machine .
-
薄板小变形MAG焊焊接工艺研究
Research on MAG welding technology of welding little deformation on thin plate
-
NET技术和3层结构体系开发实现B/S模式焊接工艺文档制定与管理系统的解决方案;
Based on these , a resolution to develop and establish a design and management system for welding process documents with Browser / Server mode is proposed and realized by adopting ASP .
-
采用扫描电镜(SEM)分析了不同焊接工艺参数下Fe3Al/18-8扩散焊接头的显微组织特征。
The microstructure feature in the diffusion - welded joint of Fe3Al / 18 - 8 was observed by means of scanning electron microscope ( SEM ) .
-
焊接工艺参数对A-TIG焊的焊缝成形影响
EfFect of welding parameter on weld form in A - TIG welding
-
梅钢150t转炉炉壳钢板焊接工艺研究
Welding procedure study of 150 t converter vessel for Meishan Steel Plant
-
文章介绍了STT半自动根焊+APW&Ⅱ自动焊的焊接工艺、施焊方法以及施工措施。
The paper introduces the welding process , welding method & construction measures .
-
通过一系列的焊接工艺试验,对输送H2S介质的服役管道焊接接头进行了全面的评价,最终确定了输送H2S介质压力管道维修的焊接工艺参数。
The comprehensive evaluation of welded joints in the transmission medium H2S service pipe was conducted through a series of welding experiments .
-
对T2紫铜与10钢电子束焊接工艺进行了初步的试验与研究。
In this paper , it introduces the preliminary experiment and study for the EB welding process of T2 copper / 10 steel .
-
薄板高强铝合金LY12CZ焊接工艺参数的优化
Parameters optimization for welding aluminum alloy 2024 sheet with high strength
-
对LF6铝合金的激光-电弧复合焊接工艺进行了初步研究。
The laser-arc hybrid welding technology for LF6 aluminum alloy was introduced .
-
研究了奥氏体不锈钢A-TIG焊和普通TIG焊在焊接工艺参数不同时对其焊缝成形的影响。
The effect of welding parameter on weld form in A - TIG and conventional TIG welding of austenitic stainless steel is studied .
-
变形镁合金AZ31B的激光焊接工艺研究
Study of YAG Laser welding process on wrought magnesium
-
研究了8090Al-Li合金的YAG激光焊,通过金相观察、显微硬度测定以及电子探针微区成分分析,结果表明:在一定的焊接工艺参数下,能得到优良的焊接接头。
Welded joints of Al-Li alloy welded by YAG laser are investigated through metalloscopy , micro-hardness and electron probe micro-analysis . The results showed that a suitable welded joint can be obtained under proper welding parameters .
-
采用Foxproforwindows(FPW)建立了焊接工艺规程数据库系统(WPSDBS)。
A data base system of welding procedures ( WPSDBS ) is created on the basis of FoxPro for Windows software .