双马来酰亚胺

  • 网络bmi;bismaleimide;bmd;bismaleimides
双马来酰亚胺双马来酰亚胺
  1. 双马来酰亚胺树脂湿法缠绕耐高温高内压防护套管

    Wet filament wound pipe with BMI resin use in high temperature and internal pressure protection

  2. 实验采用浇注工艺制备纳米凹凸棒土/双马来酰亚胺(BMI)树脂基复合材料。

    In this experiment , nano-attapulgite / BMI composite was prepared by casting method .

  3. H级双马来酰亚胺无溶剂浸渍漆

    Study on a Class H Solventless Bismaleimide Impregnating Varnish

  4. N,N-′4,4′-二苯甲烷双马来酰亚胺的均相合成

    Homogeneous Synthesis of N , N ′ - ( 4,4 ′ - Diphenylmethane ) Bismaleimide

  5. 石墨及石墨/双马来酰亚胺减摩树脂复合材料的XRD研究

    Study on XRD Spectra of Graphite and Graphite / Bismaleimide Antifriction Composites

  6. 烯丙基化合物对双马来酰亚胺树脂的改性研究丙烯酰胺-丙烯酸钠-N,N′-亚甲基双丙烯酰胺共聚物的合成及溶液性质

    THE MODIFIED STUDY OF DIALLYL COMPOUNDS ON BISMALEIMIDES Synthesis and Solution Properties of AM / AANa / MBAA Copolymer

  7. 通过对马来酰亚胺基苯甲酸及其酰氯化路线合成了两种含芳酰胺键的液晶双马来酰亚胺Ⅰb和Ⅱb;

    Two kinds of liquid crystalline bismaleimides (ⅰ b and ⅱ b ) containing aromatic amide bonds in their backbone were synthesized .

  8. 双马来酰亚胺(BMI)树脂是加聚型聚酰亚胺的典型代表。

    Bismaleimide ( BMI ) resin is a typical representative of polyimide of polyaddition type .

  9. N,N-间苯撑双马来酰亚胺在天然橡胶普通硫黄硫化体系中的应用

    The Application of N , N ' - meta-phenylene-bis-maleimide ( HVA-2 ) on NR Cured by Conventional Sulfur Curing System

  10. 双马来酰亚胺(BMI)&玻璃布复合材料成型工艺及性能研究

    On Molding Process and Properties of BMI / Glass Cloth Composite

  11. 纳米MgO催化双马来酰亚胺聚合研究

    Researches on Catalyze Polymerization of Bismaleimide with Activated Nanometer - sized MgO

  12. 纳米Si3N4填充聚双马来酰亚胺摩擦磨损性能研究

    Friction and Wear Behavior of Nanometer Si_3N_4-filled Bismaleimide Composites

  13. 纳米Si3N4/双马来酰亚胺/氰酸酯树脂复合材料的性能

    Properties of Nano-Si_3N_4 / Bismaleimide / Cyanate Resin Composites

  14. 碳纤维/双马来酰亚胺(BMI)复合材料力学性能的研究

    Studies on mechanical properties of carbon fiber / bismaleimide ( bmi ) Composites

  15. 纳米TiO2对双马来酰亚胺固化反应的催化作用

    Catalytic action of nanometer sized tio_2 on the curing reaction of bismaleimide resin

  16. 有机硅改性双马来酰亚胺BMI粘结剂的合成及其研究

    Synthesis and studies of siloxane-modifed BMI adhesive

  17. 纳米SiO2/双马来酰亚胺复合材料的性能研究

    Study on Nanometer SiO_2 / Bismaleimide Composites

  18. RTM专用双马来酰亚胺树脂体系化学流变特性

    Rheological behavior of a bismaleimide resin system for RTM process

  19. 同时该模型揭示了典型双马来酰亚胺树脂体系的固化反应是按不同机理分段进行的,在反应过程中由自催化模型转变为n级反应模型。

    The results indicated that the curing reaction processing can be divided into two stages following different mechanics , with the autocatalytic reaction model transformation into the nth reaction model .

  20. 采用DSC方法研究RTM专用双马来酰亚胺树脂的固化动力学模型与固化动力学参数。

    The cure kinetic model and kinetic parameters of BMI resin for RTM are studied by DSC .

  21. 综述了热塑性树脂(TP)对双马来酰亚胺树脂(BMI)的改性方法及研究进展。

    The recent development and modification methods of the bismaleimide resin toughened with thermoplastic resin were reviewed in this paper .

  22. 改性双马来酰亚胺树脂在RFI工艺中的应用

    Modified Bismaleimide ( BMI ) Resin and Its Application in RFI

  23. 互穿聚合物网络共混的应用I.双马来酰亚胺/苯胺一双马来酰亚胺/二苯醚互穿聚合物网络高温粘合剂的研究

    Oxide Interpenetrating polymer Network Applications of Blend in Interpenetrating Polymer Network ( I ) Studies on High Temperature Adhesive of Dimaleimide / Aminobenzene-Dimaleimide / Diphenyl

  24. 本论文分别采用聚醚砜(PES)和氰酸酯改性双马来酰亚胺树脂(BMI),研究了改性体系的几个物理和化学问题。

    In this work some chemistry and physics issues of the phase separation of modified bismaleimide systems were studied .

  25. 采用浇铸成型工艺制备石墨填充双马来酰亚胺&6,6,-烯丙基双酚A树脂(BMI-DP)复合材料。

    The composites of graphite filled bismaleimide 6,6 , diallyl bisphenol A ( BMI DP ) were prepared by casting method .

  26. 采用全动态DSC研究了双马来酰亚胺树脂(BMI)体系的固化反应动力学,建立了固化动力学的唯象模型。

    The cure kinetics of bismaleimides ( BMI ) resin system was investigated by dynamic DSC analysis and the phenomenological model was established .

  27. 适用于RFI工艺的改型双马来酰亚胺树脂的研究

    A Study of Modified Bismaleimide for RFI Process

  28. 本文合成了烯丙基醚化酚醛树脂,并与双马来酰亚胺共聚,通过FTIR和DTA进行了性能表征。

    Allyl ether phenolic resin was synthesised , then it was copolymerized with bismaleimide . Its properties were characterized by FTIR and DTA .

  29. 双马来酰亚胺树脂(BMI)和环氧树脂是高性能树脂基复合材料的主要基体树脂,被广泛应用于航空、航天等高科技领域。

    Bismaleimide and epoxy are the importance high performance matrixes for advanced composites . Major application of them is in aerospace and aviation industry .

  30. 研究了不同含量PTFE碳纤维增强双马来酰亚胺复合材料的力学和摩擦学性能,并分析了在干摩擦和水润滑条件下的磨损表面形貌和磨损机制。

    The mechanical properties and tribological behavior of carbon fiber reinforced bismaleimide composites with different PTFE contains were evaluated under dry sliding and water-lubricated conditions .