压缩应力

yā suō yìnɡ lì
  • compression stress;compressive stress
压缩应力压缩应力
  1. 硫化橡胶压缩应力松弛试验及对制品密封效果的探讨

    Compression Stress Relaxation Test of Vulcanizate and Effect of the Result on Sealing Products

  2. 同时对压缩应力应化对密封效果进行了讨论。

    Besides , the paper also discusses the effect of compression stress change on seals quality .

  3. 压缩应力下(Tb、Dy)Fe2磁致伸缩的研究

    Magnetostriction of ( Tb 、 Dy ) Fe_2 under Compressive Stress

  4. 国产航空有机玻璃(PMMA)的压缩应力-应变行为研究Ⅰ.试验方法和试验结果

    A STUDY OF UNIAXIAL-COMPRESSIVE STRESS-STRAIN BEHAVIOUR OF POLYMER PMMA ⅰ . Experimental Method and Measurement Results

  5. 对材料进行了SEM照片分析,并测试了材料的拉伸和压缩应力应变曲线。

    The cross section of laminates was analysed by SEM and their tensile and compression stress / strain curves were obtained by test .

  6. 泡沫铝压缩应力-应变曲线屈服平台段是光滑的,SiC颗粒的加入增大了基体的脆性,使得屈服平台段出现锯齿状波动。

    Hower , the yield platform of the stress-strain curve appeared jagged fluctuations , because the SiC particles increased the brittleness of the matrix .

  7. DSC和压缩应力应变测试结果表明:合金具有较高的热稳定性和优异的力学性能。

    Differential scanning calorimeter ( DSC ) and mechanism properties results show that the metallic glass is of high thermal stability and compressive strength .

  8. 取L4椎骨进行压缩应力松弛、蠕变实验。

    L4 vertebrae were taken and proceeded telescope , stress relaxation , crept experiment .

  9. 方法在ShimadzuAUTOGRAPH电子万能试验机上对L5椎体松质骨试样进行压缩应力松弛、蠕变实验。

    Methods Make the stress relaxation test and the creep test on them with Shimadzu AUTOGRAPH electronic universal testing machine .

  10. EPE静态压缩应力-应变曲线模拟

    Simulation of Strain-strain Curve for EPE Static Compression

  11. Ce-TZP陶瓷的压缩应力应变特性

    Stress-strain character of Ce-TZP ceramics under compression

  12. 应用MATLAB、PSI-PLOT等数据处理软件,研究不同应变、不同应变率下生猪软骨组织无约束压缩应力&应变、稳态弹性模量之间的关系。

    Utilizing MATLAB and PSI-PLOT data processing software , the relationship between stress-strain and equilibrium modulus under different strain and strain-rate are investigated .

  13. 介绍了用SHPB装置获得聚碳酸酯冲击压缩应力应变曲线的实验研究,并采用二波法获得了PC材料的应力应变曲线。

    This paper introduces the experimental study using SHPB apparatus for acquiring polycarbonate ′ s stress-strain curve under compressive impact loading . The stress-strain curve was obtained from incident wave and reflected wave under impact loading .

  14. 压缩应力下石墨IG-110热膨胀系数的测量及验证

    Measurement and Validation of Coefficient of Thermal Expansion of Graphite IG-110 under Compressive Stress

  15. 孔隙率为53%的Fe+C基发泡样品可承受的最大压缩应力为110MPa。

    The most compressive stress of Fe + C samples powder whose porosity was 53 % wasl 10 MPa .

  16. 测量分析了新型轻质、高强度胞状铝合金(ZL111)和胞状纯铝的压缩应力应变σ-ε曲线。

    The compressive stress (σ) versus strain (ε) curves of cellular Al alloy ( ZL111 ) and cellular Al had been investigated .

  17. 实验发现在一定Si&H键浓度下,相对于平坦的硅衬底而言,在其上沉积的a-Si:H薄膜具有压缩应力,a-SiNx:H薄膜具有伸张应力。

    We have found experimentally that the stress in a-Si : H films is Compressive , and tensile in a-SiN_x : H film on the flate silicon substrate with certain content of Si-H bond .

  18. 结果表明,硬段含量及密度对PUEF压缩应力-应变性能的影响较大,而交联度对压缩应力松弛及拉伸性能的影响较大。

    Influences of the hard segment content , crosslinking degree and density on the compressive stress-strain property , compressive stress relaxation and tensile property of PUEF were studied .

  19. 采用热机械分析技术(TMA)研究了山羊绒单纱在4种不同恒定拉伸应力及压缩应力(6MPa)下,单纱形变与温度的关系。

    By Thermal Mechanical Analysis ( TMA ) method , the changes in length of cashmere single yarn with increasing temperature are investigated under four kinds of different tensile stresses of 0.01,0.05,6 and 200 MPa respectively and compressive stress of 6 MPa .

  20. 本文以XRL型铝衬套复合胶辊为例,运用静态和动态应力、应变理论,分析了运转过程中胶管、铝管承受加压后所产生之压缩应力及拉伸应力情况;

    Taking the XRL aluminium bushing complex rubber roller as one example , the paper touches on the compressive stress and stretch stress of rubber and aluminium tubes running in pressure by application of static and dynamic stress and the strain theory .

  21. 应用INSTRON-1121型材料试验机进行压缩应力松弛试验,分析了几种专用O形密封圈的老化性能,了解其在使用过程中的性能变化,同时也解决了成品件老化性能检测的技术问题。

    This paper characterized the aging properties of the special O-shape sealed rings by the compress stress relaxation method on model INSTRON-1121 testing machine . The changes of scaled-rings had been known by us . The technique problem of product aging property had been solved synchronously .

  22. 低负载下硫化橡胶压缩应力应变性能的测定

    Testing methods of stress-strain properties at low deformation for vulcanized rubber

  23. 猪服装革压缩应力应变曲线的研究

    Study on the Compressive Stress Strain Curve of Pig Garment Leather

  24. 薇菜压缩应力松弛与蠕变力学特性研究

    Research on Stress Relaxation and Creep Mechanics Behaviors of Osmunda Cinnamomea

  25. 岩石单向压缩应力&应变全过程探讨

    Approach to uniaxial compressive stress - strain process of rocks

  26. 准静态压缩应力-应变曲线测量方法的探索

    Investigation on the Method of Measuring Quasi-Static Compression Stress-Strain Curve

  27. 分别推导得出了拉伸和压缩应力作用下,裂纹扩展所需的能量的表达式。

    The energy expressions are obtained under tension and compression conditions respectively .

  28. 纯化学发泡技术在低压缩应力松弛硅橡胶泡沫材料研制中的应用研究

    Study on the low-compression-stress-relaxation silicone rubber foam using the pure chemical foaming technology

  29. 双预应力混凝土构件弹性压缩应力损失计算

    Calculation of Stress Loss due to Elastic Compression of Double Prestressed Concrete Members

  30. 多孔铝合金的压缩应力-应变特征及能量吸收性能

    Compressive stress - strain behavior and energy absorption capability of porous aluminum alloy