切削速度

由经验公式可以确定：对钻削力和扭矩影响最大的是钻头直径d，进给量f次之，切削速度v的影响最小。

Experiential formula indicates that the effect of the aiguille diameter on drilling force and torque moment is maximal , feed level takes second place and cutting speed is minimal .

切削速度与进给量对UVC硬态切削加工的影响

Effect of Cutting Speed and Feed Rate on UVC Hard Cutting

PCD刀具加工氮化硅基工程陶瓷的合理切削速度

The Optimum Velocity of Cutting Si_3N_4 Base Engineering Ceramics with PCD Tools

螺杆钻具的高转速可以为PDC钻头提高切削速度提供井下动力保障。

High rotate speeds of dynamical drilling tools can improve PDC bit 's cutting rates , and also can provide downhole motives .

聚晶金刚石刀具（polycrystallinediamond，简称PCD）呵以实现对钛合金的高效加工，与硬质合金刀具相比具有切削速度高、刀具寿命长等优势。

Compared with uncoated carbide cutting tools , the polycrystalline diamond ( PCD ) cutting tools can have higher cutting speed and have longer tool life .

假如在较大的切削速度范围内进行试验时，所得VT曲线并非经常是一单调函数关系，实际上VT曲线有时呈驼峰状。

If the test is made in a wide range of speed , the V-T curve obtained is not always in a monotonic functional relation , but sometimes becomes a camelback shaped form practically .

另外，研究了珩磨工艺参数（油缸的进给压力Pc、切削速度旋转速度Vr和切削往复速度Vo）对切削性能的影响。

Honing parameters are consist of feed pressure ( Pc ), cutting rotary velocity ( Vr ) and cutting reciprocate velocity . How the honing parameters influence the cutting ability was researched in the article .

实验表明，PCBN刀具前刀面的磨损为月牙洼磨损，后刀面的磨损为机械磨损，其磨损程度与工件硬度呈非线性关系，并随着切削速度的提高磨损量减少。

The experimental results show crater wear on the rake face and mechanical wear on the tool flank during cutting . The degree of wear and hardness of workpiece are nonlinear relation , wear extent will decrease by increase cutting speed .

分析了不同刀具材料在不同切削速度下加工1Cr18Ni9Ti不锈钢的切屑形态，随着车削速度的提高，切屑变短且易断屑，其中LT55陶瓷刀具切削加工时产生了锯齿状切屑；

Chip patterns in different cutting speed with various cutting materials were analyzed . With the increase of turning speed , chip became shorter and was easy to be broken . For instance , serration chip appeared in high sped turning stainless steel with LT55 ;

车削阶梯形零件的切削速度选择

The Choose of Cutting Speed for Ladder Machine Parts in Turning

刀具切削速度快、生产率高、加工精度高；

Imported carbide saw blade gives accurate processing and high efficiency .

切削速度对刀具磨损原因有重要影响，随着切削速度的增大，机械磨损和粘结磨损程度均减弱。

The effect of cutting speed on wear mechanism is significant .

超高速点磨削中切削速度对工件残余应力的影响

The Residual Stress Affected by Machining Velocity in Super-high Point-grinding

切削速度对切削过程温度分布影响的研究

Influence of Cutting Speed on Temperature Distribution in Cutting Process

切削速度对切削力的影响不大。

The effect of cutting speed on the cutting force is not significant .

随着切削速度的增加，刀具后刀面的磨损量明显增大。

Wear of tool increased with increasing cutting speed .

为手术医生提供实现安全切削速度的监测程序。

Safe ablation speed for monitoring procedure by surgeon .

提高切削速度，降低进给量。

Please increase cutting speed and decrease feed ratio .

分析切削速度、进给速度、不同铣削方式对加工表面残余应力形态的影响。

The influence of cutting speed , feed rate on residual stresses was analyzed .

刀具的最佳切削速度为60～70m/min。

The best cutting speed of the tool is 60 ~ 70 m / min.

重型刀具耐用度与切削速度关系式确定方法的探讨

Study of the Method in Determining the Relation between the Tool Life and the Cutting Speed

带锯切削速度及进料速度与锯材表面粗糙度的关系

The relationship among band saw cutting and processing velocity to rough degree of saw timber surface

随着切削速度的提高，绝热剪切带的显微组织发生了由形变带向转变带的演变。

The deformation bands change into the transformation bands in microstructure as the cutting speed increases .

切削速度对切屑形状的尺寸大小有影响。

Cutting speed influents chip dimension .

也还存在其它一些变量影响表面切削速度的最佳值。

There are also other variables that affect the optimal value of the surface cutting speed .

带锯轮不同的转速（切削速度）对锯割马尾松材的影响

Effects of the speed of rotation of the band saw wheel on the lumbering of Pinus massoniana

切削速度可以无级变频调速，以适应不同硬度材料加工。

The cutting speed can be adjusted by stepless frequency conversion to suit materials in different hardness .

由切削速度与切削厚度的变化进行对比，得到它的受力分析云图和磨削力的走势图。

Then , stress nephograms and grinding forces are obtained in different cutting speed and cutting thickness .

切削速度和材料硬度是决定切屑变形的两个主要影响因素。

And that cutting speed and material hardness are two main influential factors that determine chip deformation .

实验结果表明切削速度对切削力的作用存在一个临界值。

The results show that there is a critical cutting speed to decided the cutting forces information .