齿轮热处理

齿轮热处理齿轮热处理
  1. 齿轮热处理CAPP系统的设计与实现

    Designing and Implementing CAPP System for Heat Treatment of Gears

  2. 圆柱齿轮热处理畸变控制与机理分析

    Analysis and control of distortion for cylindrical gear in heat treatment

  3. 减小薄壁内齿轮热处理畸变的措施

    Measures of Decreasing Heat Treatment Distortion for Thin Wall Annular Gear

  4. 我国齿轮热处理技术概况及发展趋势

    General Situation and Progress Tendency for Gear Heat Treatment Technology in China

  5. 控制螺伞齿轮热处理变形的研究

    Study on deformation controlling of bevel gear at heat treatment

  6. 汽车后桥螺旋伞齿轮热处理畸变的控制

    Control of Heat Treatment Distortion of Auto Rear Axle Spiral Bevel Gear

  7. 格利森螺旋伞齿轮热处理后接触区的变化规律

    Tooth Contact Changes of Gleason Spiral Bevel Gear Due to Heat Treatment

  8. 低速重载齿轮热处理内在质量的要求

    The Requirement of Inherent Quality of Heat Treatment for Low-speed Heavy-duty Gear

  9. 汽车后桥齿轮热处理缺陷分析及预防措施

    The Fault Analysis of Automobile Rear Axle Gear Heat Treatment and Preventive Measure

  10. 汽车行星和半轴齿轮热处理工艺的改进

    Improvement of Heat Treatment Process for Truck Planetary Gear and Half Axle Gear

  11. 控制圆锥齿轮热处理畸变的措施

    Measures to Control Heat Treatment Distortion of Cone Gears

  12. 齿轮热处理机器人视觉导引系统的实现

    The Realization of Vision Leading System of a Robot Gear Heat Treatment Job

  13. 正火&影响渗碳齿轮热处理畸变的一个重要因素

    Normalizing : An Important Factor Influencing Heat Treatment Distortion of the Carburized Gears

  14. 齿轮热处理变形与质量控制

    Heat Treatment Deformation and Quality Control of Gear

  15. 摩托车变速齿轮热处理技术与检测

    Heat-treatment and Measurement of Transmission Gears for Motorcycles

  16. 修井机角传动箱螺旋锥齿轮热处理变形的控制

    Deformation Control of Spiral Bevel Gears During Heat-treatment

  17. 奥贝球铁齿轮热处理工艺的研究

    Research on Heat Treatment Technique of ADI Gear

  18. 齿轮热处理缺陷分析

    Analysis of gear defects caused by heat-treatment

  19. 近年来,深层渗碳在大模数齿轮热处理中已经得到越来越广泛的应用。

    In recent years , deep case carburizing has been used widely in large-module gears .

  20. 本文对影响齿轮热处理畸变的材料、锻造、预备热处理等因素进行了研究。

    In this paper , the effect factors on heat treatment distortion , such as material , forging and preheat treatment etc.

  21. 因此,我们将《某齿轮热处理车间热处理工艺自动控制系统的软件设计》作为我们学位论文课题。

    Because axle and gear are extensively used in mechanical manufacture , The Software Design of Heat-treatment Process Automatic Control in A Gear Heat-treatment Workshop is proposed .

  22. 而在实际生产过程中,齿轮热处理变形直接关系到齿轮的强度、精度等质量指标,较大的变形不仅会使后续磨削量增加,提高生产成本。

    In the actual production process , gear heat treatment distortion is directly related to the gear strength , accuracy and other quality indicators , larger deformation will not only follow-up grinding increases , higher production costs .

  23. 本文之目的意在分析引起齿轮热处理和淬火变形的原因,并提出一些对性能进行调整的方法以便在淬火时得到合适的变形和高残余应力状态。

    It is the purpose of this article to examine the causes of distortion during the heat treatment and quenching of gears , and provide some insight into proper corrective action distortion and high residual stresses during quenching .

  24. 我国齿轮热处理技术随着高参数硬齿面齿轮制造技术的发展而获得发展,先进技术的引进又进一步促进了我国这一技术水平的提高。

    The heat treatment of gears in China has been developed with the development of manufacturing technology of high performance hardened gears , and which get further improvement due to importance of the advanced gear manufacturing technique from abroad .

  25. 精锻锥齿轮渗碳热处理CAPP系统

    The Carburizing Heat Treatment CAPP System of Bevel Gears of Precision Die Forging

  26. 该文阐述了利用VC++6.0开发齿轮渗碳热处理CAPP系统的过程。介绍了系统功能模块的实现及总体设计。

    This paper says using Visual C + + Language to develop gearing heat treatment CAPP system process .

  27. 大型渗碳齿轮圈热处理畸变与控制

    Heat Treatment Distortion of Heavy Carburizing Gear Ring and Its Control

  28. 齿轮激光热处理工艺试验与结果分析

    Technical Experiment and Result Analysis on Laser Heat Treatment of Gears

  29. 齿轮的热处理畸变与控制

    Heat Treatment Distortion of Gears and Its Control Measures

  30. 主动锥齿轮的热处理工艺改进

    Improvement of Heat Treatment Process for Driving Bevel Gear