高功率激光器

  • 网络high power laser
高功率激光器高功率激光器
  1. 高功率激光器上的SBS脉冲压缩

    SBS pulse compression on high power laser

  2. 在具体设计高功率激光器,特别是折迭式CO2激光器谐振腔时,应尽可能预先考虑这种影响。

    In designing a high power laser and a folded-resonator CO2 laser in particular , it must be considered in advance as much as possible .

  3. 高功率激光器电光调Q技术研究

    Electro-Optic Q-Switched Technology of High Power and High Efficiency Laser

  4. 德州大学奥斯汀分校(universityoftexasataustin)有自己的高功率激光器,2008年其脉冲功率达到1.1拍瓦。

    And the University of Texas at Austin has its own high-power laser , which hit the 1.1-petawatt mark in 2008 .

  5. 提出了Nd:GGG晶体将在未来LD泵浦高功率激光器中获得广泛应用。

    The analysis shown that Nd : GGG can be used widely in the high - power LD-pumped lasers in the future .

  6. 大口径KDP电光开关是新一代高功率激光器多程放大系统的关键部件。

    The large aperture KDP electro-optical switch is a key unit for the new high-power laser multi-pass amplification system .

  7. 利用数值模拟对在空间不同三点设立抽运点的几种典型抽运条件下包含放大自发发射的掺Yb光纤高功率激光器特性进行了分析。

    Based on the numerical analysis of spatial different three-position-pumped situations , the research was carried out on the Yb-doped double-cladding fiber laser containing amplified spontaneous emission .

  8. 受激布里渊散射(SBS)技术在高能高功率激光器中有着很为广阔的应用前景。

    As an important tool for improving the performance of high-energy and high-power laser systems , Stimulated Brillouin scattering ( SBS ) technique has a broad prospect as practical application .

  9. K9玻璃是常用的光学材料,也是高功率激光器重要的光学元件,其性能的好坏直接关系到光学材料和激光器的抗激光损伤能力。

    K9 glass is one kind of optical materials . It is also an important kind of optical elements for high-power lasers . Its performances have effects on anti-damage of laser .

  10. 该高功率激光器是我国未来用于惯性约束聚变(ICF)研究的关键激光驱动器系统,它采用主振荡器(即前端系统)+功率放大,即MOPA结构。

    The ongoing high power laser with the structure of Master Oscillator ( i.e. Front-end System ) plus Power Amplifier ( MORA ) is going to be the major laser driver for Inertial Confinement Fusion ( ICF ) research in our country .

  11. 为估计1012W高功率激光器的光束质量,本文采用最小二乘法对已重构的波前曲面进行球面拟合,得到相对应的无波像差参考波前。

    In order to appreciate the beam quality of 10 12 W high power laser , the spherical surface fitting of reconstructed wavefront was done with least square approximation , and it gave the reference wavefront with no distortion .

  12. 随着高功率激光器的出现,激光深熔焊在工业生产中的应用日益广泛。

    The laser penetration welding is popularly used in industry field .

  13. 高功率激光器输出窗口热效应的数值分析

    Numerical analyses of thermal distortions of output window for high power lasers

  14. 高功率激光器前端系统啁啾脉冲堆积技术的研究

    Research on Chirped Pulse Stacking Technique in High Power Laser Front-end System

  15. 用增加频带宽度的方法提高钕玻璃高功率激光器输出功率

    Output power increase of high power Nd : glass laser by bandwidth

  16. 高功率激光器前端系统模拟设计

    Simulation and Design of High Power Laser Front-end System

  17. 高功率激光器在眼科学中的使用

    Observations on the use of high-power lasers in ophthalmology

  18. 然后他们需要一个高功率激光器。

    Next , the team needed a powerful laser .

  19. 高功率激光器窗口三维温度场分析及其热透镜研究

    Three-Dimensional Temperature Distribution Analysis and Thermal Lens Effect Calculation for High Power Laser Windows

  20. 最后,对氟玻璃材料作为高功率激光器输出窗口的可行性作出评价。

    The application perspective of fluoride glass as laser material window is evaluated at last .

  21. 并讨论了高功率激光器中热透镜效应对斜效率的影响过程。

    The influences of the thermal lens effect on the slope efficiency are also discussed .

  22. 用于激光推进的高功率激光器的选择

    Choosing high-power laser in laser propulsion technology

  23. 本文也进一步完善了高功率激光器阵列的耦合理论与实践。

    This article has also further consummated the high-power laser array coupling theory and practice .

  24. 应用于拉曼泵浦的高功率激光器

    High-power Lasers for Pumping Raman Amplifiers

  25. 高功率激光器用的折迭式共振腔

    Folded resonator for high power lasers

  26. 高功率激光器应用像传递技术使得激光光束准直到微型靶丸上。

    Image relaying is presented as a technique for aligning beams onto mm-sized target of high power laser .

  27. 与常规双包层光纤相比,空气包层大模面积光子晶体光纤更适用于高功率激光器的研制。

    The air-clad large-mode-area photonic crystal fibers have more advantages than conventional fibers for application in high power fiber lasers .

  28. 对于高功率激光器而言,水冷镜沟槽尺寸一般采用几百μm~1mm为宜。

    For high power laser , the channel size of the water-cooled mirror is several hundred μ m to 1 mm .

  29. 为高端激光器的研制提供了经验和借鉴,同时为研究其他高功率激光器产品奠定了基础。

    It provides experiences for advanced laser development and lays a foundation for the research of other high power laser products .

  30. 该脉冲供能系统可为激光器的10组氙灯提供脉冲能量,是高功率激光器的重要组成部分。

    The pulsed power module can pump 10 series pairs of flashlamps , and is an important part of high power laser .