陶瓷结合

Ti/Ni/Ti复合层TLP扩散连接Si3N4陶瓷结合机理

TLP diffusion bonding mechanism of Si_3N_4 ceramics with multiple Ti / Ni / Ti interlayers

陶瓷结合立方氮化硼（CBN）磨削工具是一类用于磨削加工的新型陶瓷/玻璃复合材料。

Vitrified bond cubic boron nitride ( CBN ) grinding tools are new ceramic / glass composites for grinding .

硅树脂高温转化陶瓷结合层连接陶瓷材料

Joining of ceramic materials by ceramic bonding transformed from silicone resin at high temperature

金属陶瓷结合机制探讨

Study on the cermets combination mechanism

将某些离子导体与氧化物陶瓷结合起来构成复合电解质，在大多数情况下可提高材料的电导率。

Mixing some ionic conductors and oxide ceramic together to form composite electrolyte , at most cases , can enhance materials'conductivity .

从坭兴陶刻字看书法与陶瓷结合之路远红外加热技术在坭芯和砂芯烘干炉中的应用

Combination of Chinese Calligraphy with NiXing Earth Ware ; Application of Far Infrared Heating Technology in Oven to Dry Unfired Pottery and Sand Core

因此，利用资源优势，开发新材料显得十分必要。将钼与陶瓷结合可综合金属和陶瓷的特性制备金属陶瓷材料。

So it is very necessary to develop new molybdenum-based materials . Combing molybdenum with ceramic can get cermet materials , which own the advantages of metal and ceramic .

Al2O3-TiC金属陶瓷材料结合机理的研究

A study on binding mechanism of al_2o_3 & tic cermet materials

采用磁控溅射与真空蒸发工艺相对比的方法，分析了不同金属化薄膜及其结构对薄膜与PZT陶瓷的结合力和器件高频电学性能的影响。

By comparing sputtering method with vaporization , varied structure of metallization thin films was studied .

前述的四种料浆也能良好地与Al2O3陶瓷管结合，涂覆料浆的Al2O3陶瓷管烧成温度为1000℃～1400℃。

The above four slurries were also respectively favorable combination with Al2O3 ceramic tube , and the range of firing temperature of ceramic tube after dipping slurry varied from 1 000 C to 1400 C .

另外，将插层和表面粘结压电陶瓷方法结合并用，会收到综合的CFRP振动阻尼效果。

In addition , by combining the interleaving and surface bonded PZT ceramics , joint effect of both methods has been achieved for the vibration damping of CFRP laminates .

声发射划痕实验结果表明，沉积层与陶瓷基体结合得较好，在100N的最大载荷下，沉积层没有出现剥离和崩落现象。

The result of scratching test indicated that the coating layer is combined well with ceramic body .

通过接头界面结构分析和强度测试研究了Ti/Ni/Ti复合层过渡液相（TLP）扩散连接Si3N4陶瓷的结合机理。

The mechanism of transient liquid phase ( TLP ) diffusion bonding of Si 3N 4 ceramics with multiple Ti / Ni / Ti interlayers was investigated by analyzing the interfacial microstructures and examining the joint strengths .

机械研磨对陶瓷涂层结合强度的影响

Influence of Mechanical Grinding on Junction Strength of Porcelain-coating

铝合金基体等离子喷涂陶瓷涂层结合性能研究

Study on the Bonding Performance of Plasma Sprayed Ceramic Coatings on Aluminum Alloys Substrate

牙冠类型包括全瓷牙冠、陶瓷金属结合牙冠和全金属牙冠。

Types of crowns include the full porcelain crown , the porcelain-fused-to-metal crown , and the all-metal crown .

在金属/陶瓷类结合材料中，后者出现的概率更大。

For bonds of dissimilar materials such as Metal / Ceramic , the latter type of fracture occurs more likely .

陶瓷涂层结合强度影响因素研究及在水压柱塞上的试验

Research of affecting Bonding Strength of Ceramic Coating Thermal-sprayed on the Metal Substrate Surface and the Experiment in Tap Water Hydraulic Piston

该金属膜与陶瓷基体结合牢固，与金属有良好的浸润性。

The metallic film combines strongly with the ceramic matrix , and the treated ceramic surface also has good wettability with metal .

实验结果表明：采用输入指令整形减振技术和压电陶瓷相结合的抑振策略，系统稳定时间缩短80%以上，双重驱动的抑振策略实现了高速高精度的运动控制。

Experiments validate that the stabilizing time is reduced by 80 % . The dual drive strategy is an excellent way to realize high speed , high precision motion control .

中国文化现象、美学理念有陶瓷的结合更加突出了这一材料的宽泛性，它又联系了人、自然、社会三大领域。

Chinese culture phenomenon , aesthetic ideas are ceramic materials combined with increased emphasis on the broad nature of this , it contacts with people , nature , society , three major areas .

分析了金属和陶瓷相间结合强度对金属陶瓷摩擦材料磨损过程的影响，讨论了金属和陶瓷相间润湿性与结合强度的密切联系。

Abstract In this paper , the important effects of the bonding strength between metal and ceramics phases on the wear processes of tribological materials of cermet are analyzed first , then the close relations between the wettability of metal ceramic and the bonding strength are discussed .

果菠萝蛋白酶用TiO2多孔陶瓷柱层析结合超滤法纯化的研究

Purification of Fruit Bromelain by Porous TiO_2-Pottery Column Chromatography and Ultrafiltration

本研究选择了临床常用的两种贵金属烤瓷修复材料&AGC金沉积系统与HeraeusAURA系统作为研究对象，旨在考察不同的贵金属基底与陶瓷材料的结合机理及结合强度。

The new high noble PFM metal materials - AGC galvano-ceramic prosthesis System and Heraeus AURA System were selected in this study .

其中添加Mo2C和WC可以有效改善Ni对陶瓷相的结合性能（润湿性），从而提高金属陶瓷的强韧性。

The addition of Mo_2C or WC can greatly improve the binding property ( wettability ) of Ni to ceramic phases , thereby can promote the strength and toughness of Ti ( C , N ) - Ni cermets .

钛合金和增韧陶瓷间的结合界面

The Bonding Interface between Titanium Alloy and Toughened Ceramic

科技与陶瓷的完美结合，是展望未来，是纳钡斯生产厂家不断追求的结晶。

The complete combination of technology and porcelain manufacture is what we pursue steadily .

其次，采用真空焊接技术研究金属相与陶瓷相界面结合状况。

Secondly , the bonding between Ni and ceramic were investigated through vacuum welding technique .

采用划痕仪、电化学腐蚀仪、球盘磨损试验机等测试了陶瓷膜的结合力、耐蚀性、耐磨性等性能；

The cohesion , corrosion and wear behaviors of ceramic coating were studied by scratch , electrochemical and ball-and-disk scar tests .

对其界面现象的研究表明，金属/陶瓷间的结合主要表现为机械结合。

It was obtained that interface bonding between metal and ceramics in composite gun pipes was mainly achieved with mechanical combination .