铬合金

从多元微合金化、热塑性变形、变质处理、除气、新型铸造工艺和热处理工艺等六个方面，综述了提高铬合金铸铁韧性研究的进展情况。

This paper describes the research progress on increasing the toughness of chromium alloy white iron in following respects of complex microalloying , thermoplastic deformation , modification , gas elimination , heat treatment and casting .

研究了C、Cr、Mo以及Ni等元素对高铬合金材料性能的影响，随碳含量的增加，高铬合金材料硬度提高，冲击韧性降低。

The effects of element C , Cr , Mo and Ni on the properties of high chromium alloy material have been investigated .

制备铜铬合金Al2O3基渣系性能的研究

Research on Properties of the Al_2O_3 Based Slags for CuCr Alloy Preparation

远缘链球菌g型对铸钛、钴铬合金、镍铬合金修复体腐蚀失泽的研究

A Study of Tarnish Induced by Streptococcus sobrinus Serotype g on Co-Cr , Ni-Cr and Casting Titanium Alloys

ICP-AES测定硅铬合金中铝和锰

Determination of aluminium and manganese in chromium-silicon alloy by ICP-AES

钴铬合金烤瓷冠修复后龈沟液AST和ALP水平变化的研究

Effects of Co-Cr based porcelain-fused-to-metal ( PFM ) crown on AST and ALP levels in gingival crevicular fluid

Alloyprimer可以显著提高纯钛和贵金属与黏结剂的黏结强度，而对钴铬合金和镍铬合金则不明显。

Alloy primer can significantly increase the shear bond strengths of pure titanium and precious alloy , while it cannot increase the shear bond strengths of Co-Cr and Ni-Cr alloy .

试验表明，采用还原脱磷法使硅铬合金同进降低C、P是可行的。试验取得了脱磷率90.9%、脱碳率75.7%的较好结果。

The test shows that it is feasible to reduce carbon and phosphorus contents simultaneously by reducing dephosphorization , and the test has achieved good results of dephosphorizing ratio 90 . 9 % , decarbonizing ratio 75 . 7 % .

采用SEM、XPS等测试方法，研究了铜铬合金在二氧化硫环境中的腐蚀情况。

The corrosion behavior of cold rolled Cu-Cr alloy in humid air containing trace SO2 was investigated using scanning electron microscopy ( SEM ) and X-ray photoelectron ( XPS ) .

含Laves相TiCr2钛铬合金的高温氧化特性

High temperature oxidation resistance of Ti-Cr alloy with laves phase TiCr_2

方法用3种电压、2种脉冲持续时间对应Nd∶YAG激光不同的脉冲能量、峰值功率和功率密度，对钴铬合金标准试件进行焊接，并测量其机械强度。

Methods Standard samples were welded by laser in three kinds of voltage and for two kinds pulse duration ( corresponding to different pulse energy , peak value power and power density ) .

针对矿山工况，制备了灰铸铁基和低铬合金白口铸铁基的WC颗粒/铁基复合材料，并以高铬铸铁为对比材料，对其冲刷腐蚀磨损特性进行了测试。

: Aimed at directly mine operation conditions , WC particle / grey iron and low-chromium alloy white iron matrix composites were manufactured , and their anti-erosive wear properties were investigated against high-chromium cast iron .

含TiCr2Laves相过共析钛铬合金的制备

Preparation of hypereutectoid Ti-Cr alloys with Laves phase TiCr_2

多元高铬合金铸铁在SCHLICK抛丸机上的应用多元高铬合金铸铁叶片的研制

Study On Blade of SCHLICK Shot Blasting Machine The Development of Multi-high Chromium Alloy Cast Iron Lamina

目的对比钴铬合金、低钛合金及镍铬合金3种贱金属合金铸造冠，在3.0T及1.5T磁共振成像检查时，产生金属伪影的最大面积及伪影涉及的扫描层数。

Objective To investigate the influence of three dental alloys casting crowns on the artifacts of MRI imaging during the examination of3.0T MRI and1.5T MRI .

结果钴铬合金试件空白组、实验组6周、10周3组金属试件表面粗糙度（Rz）均值总体之间差异无显著性（P>0.05）。

Results For six weeks , and ten weeks Co-Cr alloy , blank control group and metal control groups showed no influence on Rz value ( P > 0.05 ) .

镍-铬合金与O2-SO2-SO3反应机理

Reaction Mechanism of Fe-Cr Alloy with O_2-SO_2-SO_3 Reaction

用1HNMR、MS和FT-IR测试技术对产物结构进行了表征，通过剪切强度的测试评价了其对复合树脂与高含金合金、钛合金和钴铬合金之间的粘接所起到的作用。

The structure of the product was characterized by ~ ( 1 ) H NMR , MS and FT-IR , and the effect of this product on the bond durability between ( composite ) resin with Au alloy , Ti alloy or Co-Cr alloy was evaluated .

对硫酸盐型体系的锌-铬合金电沉积进行了研究，讨论了添加剂MY-1及MY-2在锌-铬共沉积中的作用。

Electrodeposition technology with Zn-Cr sulphate was investigated . The effect of the additives MY-1 and MY-2 on electrodeposition coat of Zn-Cr alloy were studied .

偶对浸泡8h前后比较，钴铬合金/无锌银汞合金偶对的电流值差异无显著性（P>0.05），始终处于最低水平。

In comparison between currents produced by couples before and after 8 h soaking , the currents produced by Co-Cr alloy / zinc-free amalgam proved to be no significant difference ( P > 0.05 ), and the current value was low all the time .

镀覆合金的超硬磨料，如镀钛&铬合金的金刚石；真空微蒸发镀覆之后再经电镀形成的多层复合镀超硬磨料，如复合镀Ti-Ni的金刚石等。

The superhard abrasives include diamond with single-layer coating such as Ti-coated or W-coated diamond , superhard abrasives with alloy-coating such as Ti / Cr coated diamond , superhard abrasives with electroplated coating layer after the vacuum micro evaporation coating , such as Ti / Ni compound coated diamonds .

铬合金马氏体钢热强碱腐蚀特性

Corrosion of Martensite Cast Steel Containing Chromium in Hot Concentrated Alkaline

铸渗铬合金层组织特征分析

Analysis on the Microstructure Characters of the Cast - Chromized Layer

两种表面改性方法对钴-铬合金耐腐蚀性能的影响

The effects of two coatings on corrosion resistance of Co-Cr alloy

高碳中铬合金钢衬板的试验研究

Test & Investigation on the Liners of High-carbon Medium-chromium Alloy Steel

锑铬合金化及其在灰铸铁中的应用

Application of Antimony and Chromium as Alloying Elements of Gray Iron

关于气门座高铬合金铸铁缺陷对策及分析

Failure analysis and solution of high-chrome alloy iron valve seat ring

硅铬合金同时降低碳、磷的探索

Discussion on simultaneously reduce carbon and phosphorus contents in SiCr alloy

低铬合金耐磨球墨铸铁的研究

Study on Wear resistant Low Chromium Alloying Nodular Graphite Cast Iron

铸造高铬合金的磨蚀特性研究

Research on Corrosion - abrasion Characteristics of a High Chromium Alloy