胶合

南方地区杨树胶合板材定向培育技术的研究

Studies on directive silviculture of poplar veneer glued wood in the southern region of China

培育胶合板材二种密度分布对间作年限和收益大小的影响

Study on Intercropping Years and Benefit under Two types of Density Distribution in Cultural Veneer Log

MATLAB在落叶松结构用集成材胶合工艺技术研究中的初步应用

The Preliminary Application of MATLAB in the Study on Bonding Technology of Structural Glulam Made of Larch

PF与UF树脂混合比对竹帘板胶合性能的影响

Effects of the Mixing-ratio of PF and UF to Bond-properties of the Bamboo curtain Plywood

基于PWC法的宽波段三胶合转像镜设计

Wide-waveband triplet relay lens design based on PWC method

UF与麦秸混合物在加热过程中，两者之间的胶合热反应不明显。

In the course of heating wheat straw and UF the gluing reaction is not evidence between them .

对FRP（fiberreinforcedplastics/polymer）增强胶合木梁的受弯性能做了详细研究。

A detail study on flexural behavior of FRP ( fiber reinforced plastics / polymer ) reinforced glued laminated timber ( glulam ) beams is presented in this paper .

探讨了硬化层深度、表面相结构及N－S复合渗工艺对齿轮强度及抗胶合性的影响规律，从而对上述工艺在工业上的应用，提出了适用范围。

The effect of harding depth , surface phase structure and N-S compound process on gear strength and adhesion have been discussed . Thereby suitable scope were presented for application of above processes on industry .

同时针对不同的脲醛树脂，要采取不同的工艺措施；（3）将单板用BL&甲醛消纳剂浸渍后再按正常工艺生产的胶合板可达到环保E0级标准，且胶合强度有保证。

The formaldehyde emission of the plywood made of veneers soaked by BL-formaldehyde absorptive can accord with the E_0 class standard , and the bonding strength can be assured at the same time .

利用电子自旋共振波谱技术（ESR）检测漆酶处理木材、漆酶活化木素及其磺酸盐的活性氧自由基（reactiveoxygenspecies，ROS）变化规律与稳定性规律，揭示其胶合机理。

The changes and stability of reactive oxygen species ( ROS ) and their bonding mechanisms of laccase-treated wood fibers , lignin and salts of lignosulphonate respectively were determined by ESR .

当添加2%～5%的胶粘剂时，可提高低摩尔比的UF树脂对木材的胶合性能。

Addition of 2 % - 5 % ( mass ratio ) crosslinking agent improved wood adhesion of UF resin of low molar ratio .

对同一双胶合透镜在不同空间频率下的MTF值进行了测量，所得结果与实际值基本吻合。

The MTF of the same lens in the different space frequency is measured , the results agree well with the practical results .

通过该系统的设计表明，FPGA芯片不仅可以起到胶合逻辑的功能，对外围模块进行控制和连接，而且可以取代DSP（数字信号处理器）处理器完成图像处理算法的实现。

The design shows that , FPGA chips can not only be used as glue logic functions , control and connect peripheral modules , but also can replace the DSP processor to achieve image processing algorithm .

但选定和安装胶合木梁可能会非常棘手，特别是对于不熟悉材料的AEC行业的专业人员来说更是如此。

But working with glulams can be tricky , especially for AEC professionals who are unfamiliar with the material .

使用PUF树脂压制的杨木胶合板的胶合强度也随着热压温度的提高而逐渐增加。

The poplar plywood bonding strength with PUF resin increased as the hot-pressing temperature increased .

采用改性淀粉胶主剂/酚醛树脂复合胶制备的胶合板的胶合湿强度随酚醛树脂的含量的增加逐渐增加，当含量高于60%时，胶合板性能达到国家II类板水平。

The gluing properties of composite adhesives of main agents of acorn starch-based adhesives and phenolic resin increased with an increase of phenolic resin content . The tensile wet strength exceeded the level of national II plywood .

脲醛树脂分子量分布与胶合性能关系的研究&缩聚时的pH值与温度对UF树脂分子量分布及胶合性能的影响

Study on the Relationship of Molecular Weight Distribution of Urea-Formaldehyde ( UF ) Resins with Bonding Properties & The Relationship of Condensation Temperature and pH Value of UF Resins with Its Bonding Properties

给出了一种基于秩2扰动的分割策略和Laguerre迭代的分割胶合算法。

One gives a split-merge algorithm for the concomitant matrix based on the rank-two perturbation of matrix and Laguerre iteration .

选择其中之一，对采用两种不同胶粘剂胶合的竹集成方村的胶合性能进行了对比研究，胶粘剂B的综合性能优于胶粘剂A；

One of them was chosen to produce bamboo laminated blocks with two types of adhesive , UF modified with melamine ( A ) and aqueous polymer isocyanate ( B ) . Test results showed that adhesive B was superior to adhesive A in gluing properties .

复合木材的胶合强度和木破率与未处理材差异不大，都达到了JAS标准。

The bonding strength and wood failure was up to the JAS standards and was similar to that of untreated wood .

自动构建系统是自动调用外部程序的“胶合代码”，而bash非常适合于这种类型的应用。

An auto-build system is " glue code " that automates the calling of external programs , and bash is very well suited to this type of application .

利用偏振光学的知识和Origin软件计算分析了胶合层的折射率及前后不平行对Rochon棱镜透射比（或光强分束比）和偏向角的影响。

The influence of the refractive index and the non-parallel on the transmissivity and the deflection angle is researched using the knowledge of polarization optics and origin software .

胶合层对Rochon棱镜偏向角和光强透射比影响的研究

Influence of the Cementing Layer on Deflection Angle and Light Transmissivity of Rochon Prism

胆甾醇添加剂可以显著改善N15号机械油的抗胶合能力。

The cholesteric crystal liquid additives can quietly improve the scuffing resistance of oil N15 .

第十一届亚运会运动员村嬉水乐园工程，采用了60m跨度的胶合木结构屋盖。

A glued laminated wood dome with 60m in diameter is used for the roof of water park in the 11th Asian Game 's Village .

本文研究了香根草宏观、微观构造及特性，讨论了脲醛树脂（UF）对香根草的润湿性和胶合机理。

This study investigated the macro - and micro - structures and characteristics of Vetiver ( Vetiveria zizanioides ) . And the wettability to UF resin and the bonding mechanism were also discussed .

分析了各因素对改性脲醛树脂的影响，得到甲醛、尿素、苯酚摩尔比为10：8：1时树脂性能最佳，胶合强度和木破率均达到GB／T17656-1999标准规定值。

The influence factors were analyzed . The result showed that the properties were best when mol ratio of formaldehyde , urea , phenol was 10:8: 1.The bonding strength reached specified value of GB / T 17656-1999 .

在胶合木梁的受拉区设置纤维增强复合材料（FRP）是提高胶合木（glulam）梁结构性能的有效方法。

To set fiber reinforced polymer / plastic ( FRP ) composite in tensile region of glued laminated timber ( glulam ) beams is effective measure to improve structural behaviors .

胶合板材产量随立地指数的增大而增大，且占总产量的百分比在立地指数为14、16、18m时，随造林密度的增大而减小；

The percentage of plywood timber to total yield decreases with increase of planting density in the site indices 14,16 and 18 m ;

经生产性试验，用此API胶压制的三层实木复合地板、机拼细木工板、胶合板及集成材等胶合制品，其理化性能指标完全达到有关标准要求，并且制品无甲醛等有毒物质挥发。

After production experiments in three layers composite flooring board , blockboard , plywood , laminated stuff and other bond products with this API adhesive proved , all of this performance indexes are passed and there are no poison materials emission from products .