聚丁烯

聚丁烯（PB）供暖管的应用和施工

Application and Construction of Polybutene ( PB ) Heat Supply Pipe

聚丁烯（PB）/石墨复合材料的性能研究

Study of Property of Poly ( 1-butene ) / Graphite Composite

室内埋地采暖聚丁烯（PB）管道的敷设方法

Construction method of laying polybutene pipelines for room floor heating

介绍了聚丁烯（PB）管材的原料、生产工艺及特性。

Raw materials , manufacturing technologies and characteristics of PB piping are discussed .

采用不同相对分子质量的聚丁烯热塑性弹性体，对聚丙烯（PP）进行共混改性，并研究了共混物的力学性能和热性能。

Polypropylene was modified by thermoplastic elastomer poly-1-butylene ( PBt-TPE ) of various molecular mass .

实验表明：随着n（DDS）/n（Ti）的增加，聚丁烯-1的等规度先增大后减小，当n（DDS）/n（Ti）为1.3时，等规度达到最大值。

The results showed that isotacticity of polymer increased at first with the increase of n ( DDS ) / n ( Ti ), and then decreased .

同时使用不同的有机溶剂测量聚丁烯溶液的Maxwell模型松弛时间和分子扩张因数。

For non-ionic polymer , polyisobutylene was dissolved in different organic solvents . The molecular expansion factor decreased and the Maxwell relaxation time increased with increasing solvent viscosity .

介绍了国内外聚丁烯-1技术现状，包括聚丁烯-1的Z-N催化剂和茂金属催化剂研究进展，以及聚丁烯-1生产工艺技术，并简要说明了我国聚丁烯-1树脂具有很大的开发潜力。

The developing of Ziegler-Natta catalyst and metallocene catalyst and producing technical aspect at home and abroad and the production technology of polybutene-1 are summarized in this paper .

研究了甲基硅油、低分子量聚丁烯、氢化烷烃油作为增塑剂用于脱醇型RTV-1硅酮胶对其性能的影响。

Methyl end-stopped dimethylpolysiloxane , low molecular weight polybutene and hydrogenated alkane oil were used as plasticizer in RTV-1 alcohol-silicone sealant and the properties of there sealants was studied .

聚丙烯/聚丁烯热塑性弹性体共混物力学性能的研究

Study on the Mechanical Properties of PP / Poly-1-butylene-TPE Blends

同时现在很少有以高分子化合物为主料配制粘虫胶的报道，特别是利用聚丁烯为主料的报道。

Specifically there are little reports on preparing for sticky insect glue with polybutene .

聚丁烯-1热塑性弹性体的制备和性能

Preparation and Properties of Polybutene-1 Thermoplastic Elastomer

冷热水用聚丁烯管材的特性、质量要求及应用

Characteristics , Quality Requirements and Application of Polybutene ( PB ) Piping for Hot and Cold Water

在聚丁烯和玉米浆的界面观察到复合乳化结构。

A multiple emulsion structure was observed at the boundary between the corn syrup domains and the rest of the matrix .

聚丁烯由于其在一定的分子量的条件下粘度可调，因此它已经被广泛的应用于胶粘剂工业。

Because the viscosity of polybutene can be adjusted at the certain molecular weight , it has been widely used in adhesive industry .

结果表明：甲基硅油增塑剂对降低模量、提高位移能力效果明显；聚丁烯与聚硅氧烷相容性差，影响与基材的界面粘接；

The results show that methyl end-stopped dimethylpolysiloxane remarkably lower modulus and improve movement ability of silicone sealant , while incompatibility of low molecular weight polybutene to polysiloxane lead to negative effect on adhesion .

丁基密封胶是由丁基橡胶50～100（质量份，下同），湿润剂10～20，碳酸钙100～150，增粘剂聚丁烯50～80等组成。

The butyl rubber type sealant comprises butyl rubber 50 ~ 100 , wetting agent 10 ~ 20 , calcium carbonate 100 ~ 150 , tackifier polybutene 50 ~ 80 parts ( mass ) et al .

为了提高聚氨酯胶粘剂粘接三元乙丙非极性橡胶材料的粘接强度，在三元乙丙橡胶配方中添加石油树脂和聚丁烯作增粘剂，测试了新配方产品的力学性能和与聚氨酯胶粘剂的粘接强度。

In order to increase the bonding strength between polyurethane adhesive and nan-polar EPDM rubber the petroleum resin and polybutylenes , which were used as thickeners , were added into EPDM rubber formulation . The mechanical properties of the new product and its bonding strength with polyurethane adhesive were measured .

Z-N催化剂中的外给电子体对聚1-丁烯结构性能的影响

Influence of different external donors on the structure and properties of poly-1-butene in Ziegler-Natta catalyst

以氢气为相对分子质量调节剂，采用自制的TiCl4／MgCl2-Al（i-Bu）3负载钛催化体系，合成了聚1-丁烯热塑性弹性体（PBt-TPE）。

With the addition of Hydrogen as a relative molecular mass regulator and TiCl_4 / MgCl_2-Al ( i-Bu ) _3 catalyst system , Polybutene-1-thermoplastic elastomer ( PBt ) was synthesized in 3L autoclave .

聚1-丁烯热塑性弹性体的老化与防护

The aging and protection of P ( 1-Butene ) thermoplastic elastomer

负载钛催化体系合成聚1-丁烯的序列结构

Sequence structure of polybutene - 1 synthesized with supported Ti catalyst

模压温度对聚1-丁烯热塑性弹性体结构及性能的影响

Effect of molding temperature on structure and properties of poly-1-butylene thermoplastic elastomer

聚1-丁烯管材用料的制备及其性能测试

Preparation and Performance Test of Poly ( 1-butene ) for Pipe Materials

乙烯催化二聚制丁烯－1技术进展

Technical progress on the preparaton of butene-1 by catalytic dimerization of ethylene

乙烯二聚合成丁烯（-1）反应器的放大设计

Scale up and design of reactor for the synthesis of butylene-1 via ethylene dimerization

不同聚合方法合成聚1-丁烯热塑性弹性体的结构与性能

Structure and properties of poly ( 1-butene ) thermoplastic elastomer synthesized by different polymerization methods

乙烯二聚合成丁烯-1的研究

Investigation of Ethylene Dimerization to Butylene-1

乙烯二聚制丁烯-1扩大试验

Dimerization of Ethylene to 1-Butene

高全同聚1-丁烯的性能

Properties of isotactic 1-polybutylene