粘结剂

CO2固化碱性酚醛树脂粘结剂的组成及固化机理研究

Research on Component and Cure Mechanism of CO_2 Cure Phenolic Resin Binder

MS粘结剂是理想的固硫型煤粘结剂。

MS binder is suitable for capturing sulfur briquette .

利用P型粘结剂制煤棒生产合成氨

Manufacture of Coal Bars with P-binder for Synthetic Ammonia Production

纳米改性CO2-高模数水玻璃砂绿色铸造粘结剂的开发研究

The Research on Nano-modified CO_2-hardening High-modulus Waterglass Sand for Foundry Moulding and Coremaking

植物油沥青粘结剂模拟发气气体的GC／MS分析P

Analysis of Gas of Plant Oil Pitch Binder Produced by Simulation on GC / MS

为此，提出了理想的有机粘结剂分子构型（XPK）。

In this paper , the molecular structure mould ( X P K ) of organic binder is proposed .

最佳焙烧温度为550℃，w（粘结剂）为30%；

Optimum calcination temperature is 550 ℃, mass fraction of adhesive is 30 % .

不同类型牙本质湿粘结剂粘接界面的TEM分析

TEM analysis of bonding interface on different wet-bonding systems

结论Nd∶YAG激光联合釉质粘结剂治疗牙本质过敏症有明显疗效。

ConclusionNd ∶ YAG laser combined with enamel cement has an obvious effect on DH .

HA型粘结剂的谱学研究

Study on spectroscopy of HA type binder

然后对EPS乳液粘结剂的粘结机理及其环境问题等进行了分析。

The adhesion of EPS solution and environmental question were also studied .

用CMC作为生物质型煤粘结剂的试验研讨

A Study of Experiment on Binder CMC for Moulded Bio-Base Coal

借助XPS和SEM微观分析的方法，探讨了水玻璃粘结剂改性方法及材料对水玻璃粘结剂的改性机理。

The mechanism of the modification methods and materials was discussed and analyzed using XPS and SEM .

结论Glumacomfortbond和singlebond分别在两种建模方式下进行比较，两种粘结剂粘结强度的差异无显著性意义。

Conclusion In two different models the bonding strength has no significant difference between Gluma comfort bond and Single bond .

目的：对EM粘结剂银汞合金粘结充填进行实验及临床应用研究。

Objective : To perform experiment and clinical study of EM dental adhesive for silver amalgam restortions .

HM2合脂粘结剂与铸件质量

HM-2 Synthetic Fatty Acid Derivatives Binder and the Quality of the Casting

粘结剂成分对WC－20（Fe／Co／Ni）硬质合金力学性能和显微组织的影响

The influence of the binder composition on the microstructures and mechanical properties of wc-20 ( fe / co / ni ) cemented carbides

DY粘结剂在客车车钩制心上的应用

Application of the DY binder in core-making for passenger car couplers

研究以丙烯酸-有机硅乳液为粘结剂，以粘结成膜的方式，将TiO2光催化剂固定化。

Acrylic-silicone was used as adhesive to immobilize TiO2 photocatalyst by the method of adhere to the coating film .

酯固化纳米SiO2/酚醛树脂粘结剂的研究

Study on ester-cured nano-SiO_2 / phenol-formaldehyde resin binder

电镜扫描（SEM）发现，金属粉末与粘结剂的分散均匀和完善程度的变化规律和型坯密度随着振幅（频率）的变化规律基本一致。

SEM showed that the change of uniform dispersion and distribution is basically accordant with the change of density with vibration amplitude ( frequency ) .

因此上世纪30年代就有了代Co粘结剂的研究，起初主要是为了打破专利的限制，后来则是因为Co资源的稀缺。

Research on binders substituting Co began in the 1930s , and it was to avoid the patent at that time and later for the rareness of cobalt .

树脂粘结剂CBN砂轮的喷射修锐

Jet sharpening of resin bond CBN wheel

MIM粘结剂中聚合物性质的估算

Estimation of Properties for Polymers in MIM Binder

PBX药柱的不可逆长大对TATB/粘结剂界面粘结性能的影响

Influence of Irreversible Growth of PBX on Interface of TATB / binder

混炼时加入硬脂酸（SA）作为表面活性剂以改善粘结剂对粉末的润湿性。

When mixing , stearic acid ( SA ) was added as a surfactant to improve the wettability of the powder binder .

其组成材料主要为：水泥、粉煤灰、玻化微珠、EPS颗粒、高分子粘结剂、纤维网格布等。

Its main constituents are cement , fly ash , vitrified microsphere , EPS grain , macromolecule binding agent and fiber .

研究了金属粉末注射成形新型PEG基热塑性粘结剂的注射料性能。

A Novel PEG-Based Binder for Metal injection Molding The properties of MIM feedstock with a novel PEG-based binder were studied in this paper .

YL泡沫玻璃内墙保温粘结剂系列；

YL serials of bonding agents for interior wall cellular glass thermal insulations ;

用PVA作粘结剂，该合金只需4个循环即可活化，最高放电容量为329.7mAh/g。

With PVA used as binder , merely 4 cycles can make the alloy activated , and the maximum discharge capacity reaches 329.7 mAh / g.