硬聚氯乙烯

  • 网络PVC-U;upvc;PVC;pvcu;PVC U
硬聚氯乙烯硬聚氯乙烯
  1. 室外埋地硬聚氯乙烯(PVC-U)给水管设计、施工探讨

    Discussion on Design and Construction of PVC-U Water Service Pipes for Buried Outdoor

  2. 为探索在试压时低压下即破裂的硬聚氯乙烯(PVCU)管材的破裂原因,对这些破裂管材的断裂面进行了仔细观察,发现在这些断裂面上均有缺陷粒子存在。

    For searching the burst cause of PVC-U pipes during hydrolic test under low pressure , the cracked sections of those PVC-U pipes were observed and the defective particles were found in them .

  3. GB/T6671.1-1986硬聚氯乙烯(PVC)管材纵向回缩率的测定

    Unplasticized polyvinyl chloride ( PVC ) pipes & Determination of longitudinal reversion

  4. GB/T8814-1998门、窗框用硬聚氯乙烯(PVC)型材

    Unplasticized polyvinyl chloride ( PVC ) profiles for the frames of doors and windows

  5. PVC球形树脂是国内外硬聚氯乙烯管专用树脂,详细介绍了国产球型树脂加工性能及其在管材、型材中的应用特点

    PVC spherical resin is a special purpose resin used in rigid pipe manufacture both

  6. GB/T8801-1988硬聚氯乙烯(PVC-U)管件坠落试验方法

    Test method for unplasticized ( PVC-U ) fittings by falling

  7. GB/T10002.1-1996给水用硬聚氯乙烯(PVC-U)管材

    Unplasticized polyvinyl chloride ( PVC-U ) pipe for water supply

  8. 目前,国内掀起了推广使用PVC-U硬聚氯乙烯管的热潮;

    PVC - U pipe is widely popularized to use in China today .

  9. GB/T13020-1991硬聚氯乙烯(PVC-U)管材&外径和壁厚极限偏差

    Unplasticized polyvinyl chloride ( PVC-U ) pipes-Tolerances on outside diameters and wall thicknesses

  10. 废旧PVC电缆料制备木塑复合材料的研究与优化GB/T10002.1-1996给水用硬聚氯乙烯(PVC-U)管材

    Study on Manufacturing Wood-plastic Composite Materials Using Waste PVC Cable Unplasticized polyvinyl chloride ( PVC-U ) pipe for water supply

  11. GB/T13526-1992硬聚氯乙烯(PVC-U)管材二氯甲烷浸渍试验方法

    Unplasticized polyvinyl chloride ( PVC-U ) pipes-Dichloromethane test

  12. 硬聚氯乙烯(UPVC)加筋管在市政工程应用的价值分析

    Evaluation of Reinforced UPVC Pipes Applied in Municipal Works

  13. UPVC(硬聚氯乙烯)管在给排水管道中的安装要素

    Key Points for Installation of UPVC Pipe in Water Supply & Drainage Pipeline

  14. 在埋地状态下硬聚氯乙烯(UPVC)管变形及土体反作用模数实验研究

    Study on the Deformation and the Earth Reaction Modulus of Underground UPVC pipes

  15. GB/T8802-1988硬聚氯乙烯(PVC-U)管材及管件维卡软化温度测定方法

    Determination of vicat softening temperature for unplasticized polyvinyl chloride ( PVC-U ) pipes and fittings

  16. 分析了纳米水滑石(LDHs)对硬聚氯乙烯(UPVC)热稳定性的影响机理;

    The influence mechanism of LDHs on thermal stability of UPVC was analysed .

  17. 硬聚氯乙烯(UPVC)管中重金属稳定剂扩散入水中规律的实验研究

    The Research on the Diffusion of Heavy Metal Stabilizers in UPVC Pipe to Water

  18. 介绍一种新型PVC增韧剂UF-810在填充硬聚氯乙烯管材中的加工应用情况。

    The processing and application of a new toughner UF-810 in RPVC pipe were introduced .

  19. 从苏维脱到速微特&《旋式速微特单立管排水系统安装》标准图集简介硬聚氯乙烯螺旋单立管(PPI)的应用与发展

    Brief on the Album of Standard Drawings of Spiral Single Stack Discharge System The Application & Development of the Pipe Material-PPI in Building Drainage System

  20. 本文通过硬聚氯乙烯(R-PVC)浓硫酸、硬聚氯乙烯-乙醇、聚甲基丙烯酸甲酯(PMMA)-乙醇三体系,进行了应力松弛行为的研究。

    The behaviour of the stress relaxation for the following three systems : PVC-concentrated sulphuric acid-PVC-ethanol and PMMA-ethanol have been studied im shis paper .

  21. 分析了硬聚氯乙烯(UPVC)管材的塑化度与力学性能的关系,得出硬PVC管材塑化度的最佳范围为60%~70%。

    The relation between UPVC pipe plastification degree and mechanical properties were studied . The results showed that the best plastification degree of the UPVC pipe was 60 % ~ 70 % .

  22. 新型铝酸酯偶联剂DL-411-A在硬聚氯乙烯制品中的应用

    The Application of New Aluminate Coupling Agent , DL-411-A to Rigid PVC Products

  23. 介绍了具有芯层发泡和内壁螺旋结构的用于建筑排水的硬聚氯乙烯(PVC-U)管材及配件的成型加工技术和性能特点。

    The molding technology and performance characteristics of PVC - U pipes with foaming core and spiral inner wall used in the building drainage and sewage systems are introduced .

  24. 结合多级注射成型工艺在硬聚氯乙烯(PVC-U)管件加工中的应用,总结出PVC-U管件加工中多级注射工艺流程特性曲线的特点。

    Integrated with its application in process of PVC-U piping fabrication , the conclusion is made with the features and the flow chart of the process with multi-stage injection for PVC-U piping fabrication .

  25. 介绍了硬聚氯乙烯、交联聚乙烯、铝塑共挤复合、ABS、共聚聚丙烯、聚乙烯1、超高分子量聚乙烯(UHMWPE)等7种材质类型的塑料给水管的基本性能及生产技术概况。

    This paper introduces basic properties and production technology of seven kinds of plastic water supply pipes including PVC U pipe , PEX pipe , coextruded aluminum-plastic pipe , ABS pipe , PP pipe , PE-1 pipe and UHMW-PE pipe .

  26. 通过柔性接口机制铸铁管与硬聚氯乙烯(UPVC)塑料管在住宅排水系统中的应用比较,认为柔性接口铸铁排水管为住宅排水管材的主流;

    Through comparison of the application of machine-made cast iron pipe with flexible interface and UPVC plastic pipe in the drainage system of dwellings , this paper holds that the cast iron drainage pipe with flexible interface should be used as the major ones among dwelling 's drainage pipes .

  27. PVC-M管材(改性聚氯乙烯管材)、PVC-O管材(取向聚氯乙烯管材)兼有非凡的强度和韧度,和传统的硬聚氯乙烯管材比可以采用较高的设计应力,显著地节约材料。

    PVC-M pipes ( modified PVC pipes ) and PVC-O pipes ( oriented PVC pipes ) have an exceptional combination of strength and toughness properties enabling much higher design stresses and material savings compared to the traditional PVC-U pipes .

  28. 硬聚氯乙烯塑料管的联接、增强、设计和应用

    The Join , Reinforcement , Design and Application UPVC Plastic Pipe

  29. 安装使用硬聚氯乙烯塑料排水管中的注意事项

    Points for Attention in fixing and Using UPVC Plastics Drain Pipe

  30. 硬聚氯乙烯挤出结构泡沫的流变行为研究

    Study of the Rheological Behavior of Rigid PVC Extrusion Structural Foam