热固性

热固性塑料线圈骨架注射模设计与CAE分析

CAE analysis and design of injection mould for thermoset plastic loop framework

以石墨作骨料，热固性酚醛树脂作粘结剂，用包混（CM）工艺制备了包混炭素材料。

The carbon coat - mix material with graphite as aggregate and thermoset PF resin as binder was made by CM process .

电木就是人们都熟悉的热固性材料，具有多种用途。

Bakelite is a well-known thermosetting material and it has a wide variety of uses .

H级热固性聚酰亚胺薄膜粘带的研制

Preparation of a class H thermosetting adhesive tape of polyimide film

用改性热固性树脂作粘结剂，分别用A和B两种鳞片石墨作原料，采用相同的工艺条件制得和两种炭刷坯体。

Carbon brush ⅰ and ⅱ using foliate graphite A and B respectively were prepared under the same technological conditions and with modified thermosetting resin as binder .

BMP系列热固性聚酰亚胺树脂基复合材料的应用进展

Application Progress of BMP Thermosetting Polyimide Resin Matrix Composites

着重阐述了使用IR法分析热固性玻璃钢树脂基体的局限性，推荐了采用物理方法来分离树脂基体与增强纤维和无机填料是行之有效的。

The limitations of IR analysis for thermosetting FRP are explained ; a physical method of seperating resin matrix from FRP is recommended .

BMI和BCE为基础的多元共聚热固性高性能基体树脂研究

Study on High Performance BMI and BCE Based Thermosetting Copolymer Matrix Resins

反应诱导相分离法（Chemicallyinducedphaseseparation）制备多孔聚合物材料，是在固化反应开始之前，溶剂或热塑性塑料与热固性树脂混合均匀后，体系处于均相状态。

Chemically induced phase separation is a method for preparing porous polymer . Before curing reaction , solvent or thermoplastic mixes with thermosets and arrives to a homogenous state .

LCM工艺用热固性树脂体系化学流变模型的研究进展

Chemorheology Models of Thermosetting Resins and State of the Art for LCM Process

分析了热固性塑料的流动行为特点和IC封装充填过程中料流对金丝的冲击状态。

The flow behavior characteristics of thermosetting plastics and the impact of plastic flow to gold wires in the course of filling for IC encapsulation are analyzed .

合成的热固性硼酸、钼酸硅酸改性PF，各项指标符合标准YB/T4131-2005。

The indicators of boric acid , molybdic acid and silicic acid modified thermosetting PFs meet standard YB / T 4131-2005 .

塑料管系统-玻璃增强热固性塑料（GRP）管-干燥条件下测定蠕变因素

Plastics piping systems-glass-reinforced thermosetting plastics ( grp ) pipes-determination of the creep factor under dry conditions

热固性环氧类复合用涂胶NOMEX纤维纸的研制

Development of thermosetting coating epoxy nomex fibre paper for laminating

利用红外光谱分析表征了改性PF的结构，推断了改性机理及热固性改性PF的结构特征。

The structure of modified phenolic resin , modification mechanism and The structure character of thermosetting modified phenolic resin is analyzed by FT-IR .

叙述了聚酰亚胺薄膜H级热固性粘带的制造过程及主要技术指标，讨论了测试结果和影响质量的主要因素；

This article introduces the preparing process of a class H thermosetting adhesive tape of poly ˉ imide film and main technology index . The main factors of effecting on the tape quality are discussed .

氰酸酯树脂（CE）是一种非常重要的工程热固性高分子。它具有优秀的介电性能、机械性能和良好的工艺性能，因而受到了广泛的关注。

Cyanate ester ( CE ) resins are among the most important engineering thermosetting polymers and have received attention because of their outstanding dielectric , mechanical and processing properties .

介绍反应注射成型（RIM）工艺在热固性树脂PU，EP和热塑性树脂PA&6，双环戊二烯等领域的新发展。

This thesis introduces the new development of the reaction injection molding technology in the field of thermosetting plastics PU and EP thermoplastics PA-6 and dicyclopentadiene .

采用热固性反应树脂（PME）和聚乳酸（PLA）反应挤出制备了高粘度PLA。

High-viscosity poly ( lactic acid )( PLA ) was prepared using thermosetting reactive resin ( PME ) by in situ reactive extrusion .

过去的研究主要集中在有机硅改性热塑性或热固性的PU材料，对采用溶胶―凝胶法制备湿固化的有机硅/聚氨酯材料鲜见报道。

The previous studies focused on the modification of thermoplastic or thermoset PU by silicon . And few studies were on the modification of moisture-curing PU by sol-gel method .

普通碳泡沫首次于1960年由WalterFord报道，最初的碳泡沫是由热固性的聚合物泡沫分解得到蜂窝泡沫和网状玻璃态碳泡沫。

Normal carbon foam was first produced in the late 1960s by Walter Ford from pyrolysis of thermosetting polymers including cell foam and reticulates vitreous carbon foam .

采用动态粘弹谱（DMA）研究热固性丙烯酸酯类核-壳结构互穿网络水性阻尼涂料的动态力学性能。

This article studies the dynamic mechanical behavior of water-solubilized damping coating with interpenetrating polymer networks of core-shell type of thermoset polyacrylic by the dynamic viscoelastic spectrum .

双马来酰亚胺树脂（BMI）是一类高性能热固性树脂，具有良好的加工性能、耐热性能、介电性能和机械性能。

Bismaleimides , one of the most promising classes of high performance thermosetting resins , are known for their excellent processability and balance of thermal , electrical and mechanical properties .

讨论了UV固化粉末涂料超越传统热固性粉末涂料的优点。介绍了UV固化粉末涂料的组成、特性、制备及施工工艺。

This paper has discussed the advantages of the UV curing powder coatings superior to the conventional powder coatings , and described the composition , features , production and application technology of UV curing powder coatings .

水基冷贴纸塑复合胶（WP）的研制高性能覆铜板用热固性树脂

The Study on Water based Adhesive ( WP ) Used to Laminate Paper and Polymer Film THERMOSETTING RESIN FOR HIGH PERFORMANCE COPPER CLAD LAMINATE

用红外光谱法和差热分析法研究了热固性丙烯酸酯无皂水溶胶与六甲氧基甲基三聚氰胺（HMMM）的固化过程。

The curing behaviour of the soap-free hydrosol containing curing agent HMMM was studied by IR and DTA .

以异丙醇锆（ZIP）为交联剂、聚碳硅烷（PCS）为先驱体，在Ar气氛的保护下通过干法纺丝、热化学交联工艺使PCS从热塑性转变热固性结构。Iso的相序。

Polycarbosilane from dry spinning to SiC fiber through thermochemical curing , which is catalysed by zirconium iso-propoxide ( ZIP ) under Ar gas stream , is transformed from thermoplastic to thermoset structure .

PPS开始跻身于以前为环氧等热固性树脂独占的电子电气元件封装领域；

USA. PPS began to beat its way to the area of packaging of electric and electronic components which was usually dominated soly by thermosetting resins such as epoxy resin .

CBT同时具备热固性和热塑性树脂的优良特性，可以采用模压、注射、滚塑等多种成型方式。

CBT with excellent properties of both thermosetting and thermoplastic resin can be shaped by molding , injecting , rotational molding and other processes .

玻璃增强热固性塑料（GRP）管-在偏转条件下由内部引发的化学腐蚀抗性的测定

Pipes made of glass-reinforced thermosetting plastics ( grp ) - determination of the resistance to chemical attack for the inside of a section in a deflected condition