混炼

PLC在橡塑混炼设备控制系统中的应用

Application of PLC in Rubber Mixing Machine Control System

本文重点分析了四棱VCMT同步转子的混炼机理和混炼过程，并在X（S）M&1.7同步转子密炼机实验平台上进行了转子混炼效果的实验。

Particularly , the article focuses on mixing mechanism and experimental comparisons of rotors ' performance .

二氯乙烷裂解炉C4燃料气掺混炼油厂焦化干气可行性分析

Feasibility of Refinery Coking Dry Gas Blending into C_4 Fuel Gas in Ethylene Dichloride Pyrolyzer

CR混炼过程中焦烧性能的研究

Scorch safety of CR during mixing process

三螺杆动态混炼挤出HDPE/Mg（OH）2填充体系的力学性能

The Mechanical Properties of HDPE / Mg ( OH ) _2 as a Filling System in Tri-Screw Dynamic Mixing Extruder

IR不经塑炼可直接用于混炼，提高了生产效率，降低了能耗；

The productivity improved and the energy consumption reduced because IR could be directly mixed without mastication ;

用混炼法制备阻燃ABS树脂

Fire-resistant ABS resin prepared by blending

用ESR谱法研究NR的素炼和混炼历程

Mastication and mixing mechanism of natural rubber by ESR

文中利用有限元软件ANSYS对S形转子连续混炼机的流场进行了模拟分析。

A new model of flow in a twin rotor continuous mixer was analyzed with the finite element software ANSYS .

本文研究了以ABS树脂为基料、添加含卤素的高分子物及助阻燃剂，用混炼法制得自熄型ABS树脂。

This article has studied the preparation of fire-resistant ABS resin from ABS , PVC and auxiliary fire-resistant agent .

只有进一步根据橡胶混炼机理，减去压砣提起时的能量和时间后，数学模型的复相关因数R才等于0.95。

The complex correlation coefficient R of the model was equal to 0 95 only when the energy and time for lifting the ram were reduced .

将粉煤灰与三元乙丙橡胶（EPDM）混炼后与聚丙烯树脂熔融共混进行增韧改性。

Polypropylene was modified by using smelted ash powder / EPDM rubber blends as toughener .

VIC型密炼机用于白炭黑胶料混炼工艺的探讨

Study on Mixing Technology of VIC Mixer for Silica Filled Compound

研究了混炼工艺对聚亚丙基碳酸酯（PPC）／SBR共混物性能的影响。

The influence of mixing procedure on the properties of PPC / SBR blend was investigated .

根据加工对象的特性，分析异向平行双螺杆混炼挤出系统的适用性，并利用3D软件进行造型设计和运动模拟仿真。

According to the compound characteristics , analyzed the applicability of the counter-rotating parallel twin screw extruding system ; designed it using 3D software ; and simulated its movement .

用附着型促进剂PBS在机械混炼插层法的基础上制备了天然橡胶/蒙脱土纳米复合材料。

The natural rubber-montmorillonite nanocomposites were prepared with adhesive accelerator PBS by mixing intercalation method .

采用溶液混炼法制备复合材料时，SR的拉伸强度、撕裂强度明显提高，介电损耗降低。

When nanocomposites were prepared by solution method , the tensile strength and tear strength increased , but dielectric loss decreased .

混炼时加入硬脂酸（SA）作为表面活性剂以改善粘结剂对粉末的润湿性。

When mixing , stearic acid ( SA ) was added as a surfactant to improve the wettability of the powder binder .

采用熔融共混以及先混炼再熔融共混的方法制备了PP/纳米CaO3及PP共聚物（PPR）/SBS/纳米CaCO3复合材料。

SPP / CaCO 3 and PPR / SBS / CaCO 3 nano composite were prepared by melt blending .

采用Z桨捏合机，将端乙烯基硅橡胶、气相法白炭黑及羟基硅氧烷进行混炼，制备了高强度硅橡胶混炼胶。

High strength silicone rubber compounds were prepared using vinyl-terminated silicone rubber , fumed silica and hydroxy siloxane by intensive mixing method in Z blade mixer .

三螺杆动态混炼挤出机制备TPV的力学性能研究

Study on Mechanical Properties of TPV Made by A Tri-screw Dynamic Extruder

在振动力场作用下的三螺杆动态混炼挤出机上，采用硫磺硫化体系对不同配比EPDM／PP共混物进行动态硫化实验。

Dynamic vulcanization of EPDM / PP blends with sulphur curing system was carried out in a vibrating force field at controlled frequencies and amplitudes .

采用表面电阻测试和扫描电镜，分析研究了软质聚氯乙烯（PVC）树脂与炭黑（CB）复合体系的抗静电性与炭黑含量、分布形态、PVC树脂型号及混炼塑化工艺之间的关系。

Antistatic properties of carbon black ( CB ) filled plasticized poly ( vinyl chloride ) ( PVC ) were studied using surface resistivity tester and SEM .

SRF填充型粉末氯丁橡胶的混炼流变性能

Rheological property of SRF extended powdered polychloroprene rubber

结果表明，纯化CNT直接与NR混炼，前者在NR中的分散效果不好，二者的界面结合欠佳。

When purified CNTs were blended with NR directly , the dispersion level and interface - bonding in composites were rather bad .

首先，制备PVC混炼片，以硬脂酸钙为润滑剂、DOP为增塑剂、三盐基性硫酸铅为稳定剂。

First , preparation of PVC mixing films , acid calcium as lubricant , DOP as plasticizer , three base lead sulfate as stabilizer .

结果表明，预先将聚脂短纤维和EPDM混炼制成母炼胶，然后再与PP共混进行动态硫化制备的复合材料的性能最佳。

The results showed that the blending method of premixing masterbatch of short polyester fiber and EPDM , and then blending with PP was the best method .

实验结果表明，随着充油量的增加，生胶ML值，屈服强度和拉伸强度均下降，可塑性增加，扯断伸长率变大，混炼行为变佳，胶料挤出性能由劣等转变为中等。

The experimental results showed that the Mooney viscosity value , yield and tensile strength of raw rubber decreased , but plasticity and elongation at break increased with increasing the oil loading .

将改性前后重钙粉体辅以适当的加工助剂与PVC树脂进行熔融混炼而制得PVC/CaC03复合材料。

After that , modified and unmodified GCC putting into some process additives and PVC were put together respectively to obtain PVC / CaCO_3 composites with the method of melt co-mixing .

实验表明，采用双螺杆挤出机混炼设备，控制适宜的反应时间、温度和引发剂用量，通过马来酸酐熔融接枝小本体PP引入极性基团，可制备出性能稳定的增容剂。

The result showed that it was feasible to give small bulk PP polar unit in the melt grafting reaction by mixing with twin-screw extruder with appropriate time , temperation and DCP .