氧化锆陶瓷

~（57）Fe注入氧化锆陶瓷注入层结构的研究

Study on the Structure of the Implanted Layer in ￣( 57 ) Fe-Implanted Polycrystalline Zirconia

钛箔活性金属法连接氧化锆陶瓷和不锈钢时ZrO2/Ti结合界面的反应行为

Reaction behaviour of zro_2 / ti interface in jointing zirconia ceramics and stainless steel 304 with Ti foil

借助SEM，EPMA和显微硬度仪等分析测试手段，对氧化锆陶瓷熔模型壳工艺中的钛与型壳界面相互作用进行了研究。

The titanium and shell interface reaction of zircon ceramic sheel technological process is thoroughly studied by using SEM , EPMA and microhardness apparatus .

在对Y-TZP老化性能研究中，通过设定温度、时间、气氛等参数，对氧化锆陶瓷样品进行老化实验。

The aging experiments of Y-TZP were conducted at varied conditions including temperature , time , atmosphere , et al .

本实验对RF型氧化锆陶瓷的可切削性能、收缩性能，以及烧结后RF型氧化陶瓷的物理性能和力学性能进行了研究，为RF型氧化锆陶瓷的临床应用提供实验依据。

On the base of early research , this study detected the machinability , shrinkage , physical properties and mechanical properties of RF zirconia ceramics , which could provide experimental basis for its clinical application in the future .

文章全面阐述了部分稳定二氧化锆陶瓷（略作PSZ）以软金属或软金属氧化物润滑时的摩擦和磨损性能。

The friction and wear properties of partially stabilized zirconia ( PSZ ) lubricated with soft metal or oxide of soft metal are studied .

氧化锆陶瓷的致密度随其中CuO和CeO2的掺杂量先增大后减小，在实验设计范围内随Al2O3和MgO掺杂量的增加而增大。

Within the designed range of experiment , density of zirconia increases with the increasing of doping amount of Al2O3 and MgO , but decreases when the doping amount of CeO2 and CuO is too high .

采用低温处理制备的ZrO2-Y2O3系列超细粉末，粉末粒度达到10～50nm，经压制、等静压成型、高温烧结成致密的氧化锆陶瓷。

ZrO 2-Y 2O 3 series ultrafine powder had been prepared by subzero treatment , the particle size was 10 ~ 15 nm . By isostatic compacting and sintering , the compact zirconia ceramic element was produced .

部分稳定的氧化锆陶瓷（PSZ）具有强度高、硬度大、耐磨性好以及韧性好等优良性质，作为结构陶瓷部件的应用十分广泛。

Partially stabilized zirconia ( PSZ ) has been widely used to produce structural ceramics components in industry for its excellent physical and chemical properties , such as high strength , good hardness , fine wear resistance et , al .

氧化锆陶瓷颈圈牙种植体有限元分析

Finite element analysis of the dental implant with zirconia ceramic cervix

氧化锆陶瓷注射成形的喂料流变性能研究

Study on rheological properties of feedstock for ZrO_2 powder injection molding

高新技术中应用的氧化锆陶瓷材料

Ceramic material of Zirconium oxide applied to advanced and new technique

液钛与氧化锆陶瓷型壳的相互作用

Metal mould interactions during casting of titanium in zirconia shell mould

铁铝金属间化合物&四方氧化锆陶瓷基复合材料的研究

Study of Iron Aluminides Intermetallic - Tetragonal Zirconia Ceramic Matrix Composite

高韧性彩色氧化锆陶瓷的制备及性能研究

Preparation and Properties Research of Colored Zirconia Ceramics with High Toughness

纳米氧化锆陶瓷烧结机理及模拟计算

Study of Sintering Mechanism and Analog Calculation of Nano Zirconia Ceramics

污染对氧化锆陶瓷剪切强度影响的研究

Impact of contamination on shear bonding strength of the zirconia ceramic

对一种氧化锆陶瓷材料的室温循环疲劳行为进行了研究。

The Research Development of Cyclic Fatigue in Ceramic Matrix Composites ;

二氧化锆陶瓷插芯内孔研磨实验研究

LABORATORIAL RESEARCHING ON GRINDING Empirical Study of ZrO_2 Ceramic Ferrule Bore

口腔修复材料氧化锆陶瓷的研究与应用

Research and Application of Zirconia Ceramics as Dental Restorative Material

钛合金表面激光熔覆氧化锆陶瓷过渡区的显微组织

Transition-Zone Microstructure of Titanium Alloy Surface Melted ZrO_2 by Laser

水基料浆凝胶注模法制备氧化锆陶瓷刀具的研究

Study on Preparation of zirconia ceramic knives by aqueous gel-casting

氧化锆陶瓷注凝成型研究

D shape . Study on Gel-casting Process of ZrO_2 Ceramics

改善氧化锆陶瓷材料抗热震性的探讨

Investigation on improvement of thermal shock resistance of zirconia ceramics

钛金属氧化锆陶瓷颈圈牙种植体的结构强度与生物相容性研究

In the research . Research in the Dental Implant with Ceramic Neck

金色氧化锆陶瓷表面制作

The method of manufacturing the golden FRCIES of zirconia ceramics

可切削的氧化锆陶瓷牙科修复体的制备

Preparation of Machinable Zirconia Ceramics as a Dental Prosthetic Material

氧化锆陶瓷与皮肤组织生物相容性的初步研究

Preliminary study on biocompatibility of zirconia ceramic with skin tissues

纳米硅涂层对Cercon氧化锆陶瓷与牙本质黏结强度的影响

Effect of nano-silica coating on bonding strength of zirconia ceramics to dentin

氧化锆陶瓷的摩擦磨损行为与机理

Friction and Wear Behavior of 3Y-TZP Ceramics and Their Mechanisms