柱塞泵

zhù sāi bènɡ
  • plunger pump
柱塞泵柱塞泵
  1. 斜轴式轴向柱塞泵缸体扭转振动研究

    The Analysis for the Twisting Vibration of a Cylinder in the Axial Plunger Pump with a Oblique Axis

  2. 主要阐述了如何对往复式柱塞泵进行设备的自动监测,以及在油田采油单位的应用情况,对今后开展往复式柱塞泵站设备的监测工作提供参考。

    How to make an automatic monitoring to the reciprocating plunger pump equipment is chiefly expounded , and makes a brief introduction to its development situation in oilfield . It provides the reference to the monitoring work of reciprocating plunger pump on pump stations .

  3. 本文最后对现代主要控制算法进行了研究,将先进的智能控制算法&模糊PID控制,应用于径向柱塞泵变量控制系统。

    Last the paper use the fuzzy PID to control the improved system .

  4. 基于FEM的轴向柱塞泵配流盘静动力学仿真研究

    FEM based simulation study on static and dynamic properties of port plate in axial piston pump

  5. 在VB平台上将整个工作过程整合,实现了柱塞泵的虚拟装配。

    The virtual assembly of plunger pump comes true .

  6. 基于CFD的中压柱塞泵流道优化研究

    Optimization Research on Flow Passage of Medium Pressure Piston Pumps Based on CFD

  7. 借助虚拟样机技术并根据柱塞泵的物理模型参数,分别在MSC。

    Dynamics model and hydraulic model of piston pump individually grounded on MSC .

  8. BZ-740泵是铝型材挤压机普遍使用的一种高压、大流量的斜轴式轴向柱塞泵。

    The BZ 740 pump is a high pressure and large flow axial plunger pump .

  9. XB型轴向柱塞泵滑靴偏摩磨损失效分析

    Wear failure diagnosis for slippers caused by biased friction in XB type axial piston pump

  10. TDB径向柱塞泵的设计与研究&柱塞副两个基本公式的导出

    Design and study of TDB radial piston pump

  11. 因此,本文对XB型轴向柱塞泵作了疲劳及磨损可靠性试验研究。

    Reliability study for fatigue and wear in axial piston pump model XB has been carried out .

  12. 本文建立了轴向柱塞泵缸体与柱塞之间液体压力微分方程,用MATLAB语言仿真,同时测量出液压泵噪声,通过计算和实验研究,得出压力变化与泵噪声关系的结论。

    The paper sets up the differential equations of the pressure in the piston pump . With MATLAB , it Measured the noise of the pump , and pointed out the relationship between the pressure and the noise .

  13. 其次,对建立的数学模型进行仿真和分析,在MATLAB下绘制了数字化轴向柱塞泵变量机构的开环BODE图和闭环的单位阶跃响应图。

    Secondly , the mathematic model was used to analyse and simulate the system , and the BODE graph and closed-loop step response graph were drew in the environment of MATLAB software .

  14. 德国URACA、WOMA高压柱塞泵及整套清洗设备;

    URACA and WOMA plunger pumps and all the cleaning machine ;

  15. 在MATLAB下进行了动态仿真,取得了很令人满意的结果,从理论上证实了本课题的数字轴向柱塞泵的系统工作原理是可行的,结构设计是合理的。

    Furthermore , the dynamic simulation of the pump by MATLAB is acquired and its results add up to the need satisfactorily , which validates the feasibility of the system work principle of the digital axial piston pump from the theory and the structure design is reasonable .

  16. 对美国VICKERS轴向柱塞泵的工作原理进行了分析,对其日常使用与维修中将要遇到的一些问题进行简单的探讨,并介绍了几种相应的修复方法。

    This article analysed the operating principle of the America VICKERS axial-plunger pump , simply discussed problems occured in its routine use and maintain and introduced several methods of the corresponding repairation .

  17. 本文提出了以摩擦副的(pv)应力模型和应力强度干涉模型为基础,建立轴向柱塞泵缸体配流盘这对关键摩擦副的耐磨可靠性设计模型。

    On the basis of PV stress model and stress-strength reliability model of the friction pair , a model for wear behaviour of the cylinder block flow distributor , which is the key friction pair of axial piston pump , is established .

  18. 本文分析了XB型轴向柱塞泵滑靴偏摩磨损失效的原因,并从设计角度提出了解决这个问题的办法。

    Wear failure caused by biased friction in slippers of XB type axial piston pump is diagnosed and the method to relieve it in design aspect is offered in this paper .

  19. 通过试验评估,验证了ViSPA仿真平台在轴向柱塞泵宏观参量预测上的可信度与精确度。

    Credibility and accuracy of the ViSPA macroscopic parameters forecast are verified based on experimental results .

  20. 在分析偏心柱塞泵机构运动简图的基础上,运用CAXA实体设计软件创建了该机构的三维模型。

    Based on the analysis of the kinematic diagram of mechanism concerning the eccentric piston pump , the three-dimension model of the eccentric piston pump was established by CAXA solid design software .

  21. 采用虚拟样机技术对轴向柱塞泵进行动力学仿真,在Pro-E中建立变量柱塞泵的三维模型,后将模型导入ADAMS经处理得到变量柱塞泵的动力学模型。

    The virtual prototyping technology is used on the kinetics simulation of axial piston pump . The variable piston pump mechanism model is established in Pro / E software , and then the model is imported into ADAMS and the kinetic model of the variable displacement piston pump is obtained .

  22. 电液比例斜盘式轴向变量柱塞泵的压力特性仿真

    Pressure Simulation of Electro-hydraulic Proportional Swash-type Axial Variable Displacement Piston Pump

  23. 轴向柱塞泵几种滑靴的实验研究

    Experimental Study on Dynamical Characteristics of Slippers in Axial Piston Pump

  24. 轴向柱塞泵配油盘的有限元分析

    Finite element analysis of oil distributing plate in axial piston pump

  25. 提高柱塞泵容积效率的新途径

    Go a good Way to Increase the Efficiency of Piston Pump

  26. 高压纯水轴向柱塞泵的结构分析

    Structure Analysis of High Pressure lap Water Hydraulic Axial Piston Pump

  27. 变量轴向柱塞泵的脉动分析与研究

    Analysis And Research on Pressure Pulsations of Variable Axial Piston Pump

  28. 轴向柱塞泵变流量过程存在的问题和改进措施

    Existing Problems and Improvement Axial Piston Motor during Changing the Flow

  29. 一种新型径向柱塞泵的比例排量控制

    The Electro-hydraulic Proportional Displacement Control of a New Radial Piston Pump

  30. 径向柱塞泵滑靴机加工工艺的新方法

    The New Machining Process Method of Radial Piston Pump Slippery Boots