多端口

本文着重论述用多端口SRAM进行该系统数据共享机制的设计。

This paper focuses on designing the data sharing mechanism of the system by using dual port RAMs .

多端口网络驱动点导纳矩阵函数的综合

Synthesis of n - port Network Driving - Point Admittance Matrix Function

多端口矩形波导E面波导结数值分析

A New Approach to Analysis of Multi-port E-plane Junctions in Rectangular Waveguides

在研究了多端口存储器的有关原理的基础上，利用多端口存储器实现了多DSP的连接与调度。

With the research background of multi-port memory principles , have realized multi-DSP connection and dispatch .

一种基于多端口组件网络的MEMS系统级建模方法

A System Level Modeling Method of MEMS Using Multi-Port-Component Network

在软件设计中，实现了数据库管理及组态功能，并且使用MODEM通信技术，实现了多端口并行通信。

MODEM communication technology also gets skilled application to achieve the multicast parallel communication .

在具有共享多端口存储器的多机系统上实现FFT

Implementing FFT on the Multiprocessor with Shared Multiport Memory

采用0.18μMCMOS工艺的多端口SRAM设计

Design of a Multi-Port SRAM Based on 0.18 μ m CMOS Technology

最后推导得出任意二端口以及多端口网络的四个参数：Y参数、Z参数、H参数和G参数，所得结果适用于正弦稳态下任意线性非线性二端口以及多端口网络。

This result is applicable to any two - and multiple-port networks with linear or nonlinear components in sinusoidal steady state .

根据多端口组件网络方法，确定了MEMS组件模型的建立规范。

Based on Multi-Port-Element Network ( MuPEN ) method , the modeling criterion of MEMS component is established .

多端口IP路由器边界网关协议（BGP-4）的并行测试技术研究

Research on Parallel Testing Techniques of Border Gateway Protocol-4 in Multi-Port IP Routers

独立太阳能燃料电池联合发电系统的多端口双向DC-DC变换器研究

Study on the Multi-port Bidirectional DC-DC Converter for Alone Solar Fuel Cell Hybrid Generation System

本文介绍了由作者自行设计并建立的APPLEⅡ计算机及其接口系统，它应用于微波多端口网络的功率自动测量。

A system is designed for measuring power of microwave multiport ne - twork . It is built up with APPLE II computer and a special interface .

使用PCI总线技术和Motorola的通信控制器（MC68MH360）设计了一个综合业务数字网多端口设备。

This paper presents the hardware design for an ISDN Multi BRI device using PCI bus technology and QMC .

多端口SDRAM控制器的设计与实现

The Design and Implementation of Multi-port SDRAM Controller

之所以能从这两个平台安全地调用相同的服务，是得益于单个Web服务的多端口定义和在端口级别定义安全策略的功能。

What allows the same service to be securely accessed from both the platforms is the definition of multiple ports for a single web service and the ability to define security policies at the port level .

针对笔者已研制的具有共享多端口存储器的多处理机系统，详细介绍了在其上实现FFT算法的方法。

On account of the developed multiprocessor with multiport memory , this paper presents the detailed methods to implement FFT on the machine .

这种状况使得路由器的测试变得更加复杂，而且现有的测试方法回绕测试法（LTM，Loop-backTestMethod）和穿越测试法（TTM，TransverseTestMethod）无法适应现代多端口路由器的测试。

Moreover , existing testing methods such as Loop-back Test Method ( LTM ) and Transverse Test Method ( TTM ) are not catered for testing modern routers with multi-ports .

首次提出了几种新型基片集成波导（SIW）多端口功分／合成电路。

Several novel multiple-port substrate integrated waveguide ( SIW ) power dividing / combining circuits have been proposed firstly .

本课题以嵌入式系统开发平台科研项目为背景，重点研究了基于FPGA的多端口存储控制器的设计与实现技术，为需要大容量存储器的系统设计提供了新思路。

As a part of the Embedded System Development Platform project , this task focuses on the design and implementation of FPGA-based multi-port memory controller , providing a new approach for circuit designs which need mass storage .

基于这些考虑，四川省网络通信重点实验室（SC-NetcomLab）展开了有关路由器多端口测试技术的研究活动。

All these considerations have stimulated the research activity on multi-port testing at Sichuan Network Communication Key Laboratory ( SC-Netcom Lab ) .

给出了一种用二端口矢量网络分析仪（VNA）对多端口器件进行测量的方法。

A method for multi-port device measurement using a two-port vector network analyzer ( VNA ) is presented .

首先对亚阈值下CMOS的工作状态进行了分析，然后基于亚阈值电压下CMOS电路的工作状态，提出了新的存储单元，并采用与之前完全不同的读写方法设计了多端口的寄存器堆。

First this thesis analyzes the work status of the CMOS circuits . Then a new storage cell is proposed and new read and writes methodology is adopted based on the working status at sub threshold voltage .

另外，在重点分析后端流水线研究和支持存储级并行的存储层次的基础上，提出了一种基于EPIC体系结构的多端口存储流水线并发执行数据Cache结构。

Then on the basis of the analysis to Back-End pipeline and the memory hierarchy support to memory level parallelism , we present a design of multi-port memory pipeline parallel data Cache base on EPIC architecture .

在以上关键技术研究的基础上，本文还研究了VIM体系结构下向量协处理器的实现技术，包括标量指令集的扩展方式，多端口寄存器文件的实现，向量执行单元的流水线设计等。

This thesis also focused on implementation technology of vector microprocessor based on VIM architecture , including KD-VIM-1 ISA defination , multiported register file and vector execution pipeline etc.

在简介OPGW生产线成缆设备组成和工艺要求的基础上，叙述了OPGW生产线成缆设备的几个重要环节及其实现方法&PID（比例-积分-微分）算法和MPI（多端口接口）网络。

Based on the brief introduction of composition and process requirements of OPGW cable stranding machine some important points and their realization methods , PID algorithm and MPI network , are described .

本文提出了一种采用多端口分束器与多雪崩二极管（APD）结合构成快速单光子探测器的新方法。

A new idea is put up to design a quick single-photon detector . This quick detector is composed of a multi-port optic fiber splitter and many Avalanche Photo-diodes ( APD ) .

针对多端口存储器经常出现的存储相关性和存储顺序性问题进行仔细分析，分别提出了一种独特的相关性解决技术和顺序性解决模型，并将这些技术融入到数据Cache的逻辑设计中。

And point to memory dependence and memory ordering which happen in multi-port memory frequently , we analyze it carefully and present a unique way to solve this two problems respectively , and mix these technologies into the logic design of L1 data Cache .

V-PIM中低功耗分体多端口向量寄存器文件设计

A Low Power Banked Multi-Ported Vector Register File Design for V-PIM

首次运用等效电路法分析了这类紧凑型SIW多端口功率分配器／合成器。

This compact multiple-port SIW power dividing / combining circuits have been analyzed firstly by employing the equivalent-circuit method , and the simple model has also been presented .