多孔陶瓷材料

多孔陶瓷材料多孔陶瓷材料
  1. 近年来,SiC材料作为一种新型的柴油车尾气颗粒物过滤材料获得了迅速发展,正逐步取代目前广泛应用的堇青石多孔陶瓷材料。

    SiC materials as a new substitute of cordierite for diesel particulate trap have been developed quickly in recent years .

  2. 采用粒径较小(30nm)的TiO2为陶瓷骨架材料,且以聚苯乙烯(PS)和碳纤维为造孔剂,通过挤出成型的方法成功制备了TiO2基多孔陶瓷材料。

    The TiO_2 with small primary particle size ( 30 nm ), PS particles and carbon fibers were employed as the skeleton material of porous ceramic and pore-forming agents respectively .

  3. 排液法测定多孔陶瓷材料开孔率的探讨

    Discussion on the opening porosity of porous ceramic materials by drainage method

  4. 糖厂废弃物糖滤泥研制多孔陶瓷材料

    Filtered mud in sugar factory as a main material to make cellular ceramics

  5. 多孔陶瓷材料及其应用前景

    Porous Ceramic Material and Applied Prospect of It

  6. 多孔陶瓷材料的研究现状与进展

    Current situation and development of porous ceramic material

  7. 多孔陶瓷材料的发展状况

    Present State of Porous Ceramics R & D

  8. 多孔陶瓷材料热传导性能模拟计算与测试方法研究

    Simulation on the Effective Thermal Conductivity of Porous Ceramic Foam and Analysis of Experimental Method

  9. 本文综述了近年来多孔陶瓷材料制备技术的研究现状及应用。

    The recent status of preparing techniques and application of porous ceramic materials was reviewed .

  10. 多孔陶瓷材料制备方法

    Manufacturing Process of Porous Ceramics Material

  11. 高孔隙多孔陶瓷材料的制备工艺

    Fabrication of High Porosity Ceramic Material

  12. 应用格模型和统计学方法分析了多孔陶瓷材料的失效问题。

    The failure problems of porous ceramic materials were analyzed using the lattice model and statistical methods .

  13. 聚合物材料为模板的多孔陶瓷材料的制备研究及结构控制将此材料用模子制成的块团。

    Manufacture and Structural Control of Porous Ceramic from Polymer Templates ; a molded mass of this substance .

  14. 本实验以高岭土为粘结剂,石英为骨料,碳酸钙为发泡剂,制备轻质多孔陶瓷材料。

    In this work , the light porous ceramics were fabricated by using kaolinite , quartz and calcium carbonate .

  15. 隔热保温多孔陶瓷材料要求具备高气孔率、均匀分布的孔径和较高的抗压强度。

    Thermal insulation porous ceramics require high porosity , small and uniform distribution of the pores and high compressive strength .

  16. 研究结果表明:采有上述复合工艺在1380℃下,可成功制备出氮化硅基多孔陶瓷材料;

    The results show that : At 1380 ℃, Silicon-nitride based porous ceramic was fabricated successfully by the complex technology .

  17. 该传感器采用较简单的单端微波反射系数法,并利用多孔陶瓷材料制成渗透室。

    In the design , the single-ended reflex coefficient method was used and porous ceramics was made into the permeation cell .

  18. 通过分析我们可以看出,将多孔陶瓷材料用于间接蒸发冷却是非常有利的。

    Through analysis , we can see that it was very beneficial to use the porous ceramics materials for indirect evaporative cooling .

  19. 综述多孔陶瓷材料在污水处理、大气污染控制、固体废物处理及噪声控制等方面的应用研究现状。

    The current application progress of porous ceramics in sewage treatment , air pollution control , solid waste disposal and noise control were summarized .

  20. 多孔陶瓷材料有许多优良的性能,在工业上有广泛的应用,其发展前景十分广阔。

    The porous ceramic material has many good properties , which has the widespread application in the industry . Its prospects for development are extremely broad .

  21. 泡沫陶瓷是一种孔隙率高达70%~90%,并具有三维立体网络骨架结构和相互贯通气孔结构的新型多孔陶瓷材料。

    The foam ceramics is a new innovative porous ceramic material , which has 70 % 90 % of the porosity and three-dimension network frame structure .

  22. 本文综合论述了多孔陶瓷材料微观结构表征及各种性能的测试技术,以及相关的仪器设备。

    The article synthetically discusses the characterization of microstructure of porous materials and testing technologies about the properties of porous ceramics , and correlative testing apparatus .

  23. 采用定向凝固和冷冻干燥法制备定向多孔陶瓷材料,考察主要制备参数对多孔陶瓷材料性能的影响。

    Objectives To prepare oriented porous ceramics by directional solidification and freeze-drying method , the main preparation parameters that affect the properties of porous ceramics were investigated .

  24. 生产空心砖需要大量的生态多孔陶瓷材料,但相应的多孔陶瓷材料的性能检测工具还很不完善。

    But corresponding material performance testing tool weren 't perfect , so it has become a hot theme to develop a testing setting of multi-performance of multi-hole ceramic .

  25. 用硬脂酸凝胶法工艺合成不同配比的αFe2O3K2OB2O3复合氧化物超微粉,经液相烧结法制得多孔陶瓷材料。

    Composite oxide powders of α Fe 2O 3 K 2O B 2O 3 were synthesized by stearic acid gel method , and the porous ceramic materials were detained by the liquid phase calcination method .

  26. 本次实验使用β-磷酸三钙多孔陶瓷材料复合软骨细胞进行体外培养,从而寻找适合软骨组织工程构建的合适微结构的生物陶瓷支架材料,研究适合体内试验的生物陶瓷材料。

    This experiment used the β - tricalcium phosphate porous ceramic composite cartilage cells in vitro for cartilage tissue engineering in order to find the right building bio-ceramic micro-structure of scaffold , and study for in vivo biological ceramic material .

  27. SiO2涂层对多孔氮化物陶瓷材料性能影响初探

    Influence of Fused SiO_2 Coating on the Porous Ceramic

  28. 多孔陶瓷膜材料的研制及在气固分离中的应用研究

    Preparation of Porous Ceramic Membranes & Their Application in Hot Gas-Solid Separation

  29. 铸铁基三维连续网状多孔陶瓷复合材料的阻尼特性

    The Damping Performance of Cast Iron Matrix Composite with a Three Dimensional Network of Porous Ceramics

  30. 多孔陶瓷是材料科学领域中一类倍受关注的新型材料。

    Porous material is a new type material that has received much attention in the field of materials science .