传输线

用探针台测得不同合金工艺条件下的接触电阻值，建立传输线（TLM）模型，计算了欧姆接触的比接触电阻。选出了450℃，90s的最佳合金条件。

A transmission line model ( TLM ) was presented to calculate the contact resistivity and the optimum alloying condition of 450 ℃, 90s was chosen .

介绍了高速电路与MCM互连线分析方面的研究与开发工作，包括两种新的传输线瞬态分析方法，及基于SPICE的互连线分析系统。

This paper presents the researches and developments on the interconnects analysis for high speed circuits and systems . Two new transient transmission line analysis algorithms are introduced . A simulator for interconnect analysis based on SPICE is described .

电力线通讯（Powerlinecommunication）简称PLC，是利用现有电力传输线作为传输媒介的一种通讯方式。

Power Line Communication ( PLC ) is a communication mode using the power line .

一种连接双层传输线Via结构的全波分析

Full-Wave Analysis of a Via Connecting Two-Layered Transmission Lines

微波传输线阻抗匹配的CAD方法

CAD approaches for the impedance matching of microwave transmission line

传输线变压器分析方法的matlab仿真

Matlab Simulation of Transmission-line Transformer Analysis Method

有限元软件ANSYS在传输线特性阻抗计算中的应用

Application of Finite Element Software ANSYS to Calculate Characteristic Impedance of Transmission Line

金属屏蔽共面传输线的准TEM波传输参量计算

The Computation of Quasi-TEM Transmission Parameters of Metal Shield Coplanar Transmission Line

区域分解法结合FFT分析TEM传输线

Domain Decomposition Method Combining with FFT for Analysis of TEM Transmission Line

一种双层介质及MIS结构微带传输线传输常数的全波分析方法

A Full-Wave Analysis of Propagation Constant of Microstrip Line Two-Layer Dielectric Material or MIS

保角变换分析TEM模传输线场和Q值

An analysis of the field and quality factor of irregular TEM transmission line by conformal transformations

用边界元法计算任意截面TEM波传输线的特性

Determination of the characteristics of TEM transmission line with arbitrary crosssection by boundary element method

用MEI方法分析圆形外导体传输线

Analysing Round Outer Conductor Transmission Line with the Method of MEI

面向IC芯片结构高速数字传输线特性三维电磁场时域模拟器

3-D Time Domain Electromagnetic Wave Simulator for Characteristics of High-Speed Digital Transmission Lines in Accordance with IC Structures

双绞传输线电磁兼容特性的FDTD分析

The analysis of twisted-pair transmission lines ′ EMC property by using FDTD method

方形对称传输线TE模的色散特征曲线的数值计算

Numerical Value Computation of Chromatic Dispersion Curves of TE Model of Square Symmetry Wire

模拟发现，传输线方法预测的屏蔽结果与用FDTD方法模拟的结果能够比较好地符合。

The results predicted with transmission lines method are in agreement with that obtained by FDTD .

用低压KTP普克尔盒和微带传输线进行调Q长脉冲的任意整形

A System for Arbitrary Shaping of Q switch Laser Pulses Using KTP Pockels Cell and Microstrip Transmission Lines

在ALICE实验中，将大量采用同轴电缆作为信号传输线。

Coaxial cables as signal transmission line are employed extensively in ALICE ( A Large Ion Collider Experiment ) experiment .

一种基于RLC元包的有损传输线的渐近式构造模型

An Asymptotic and Tectonic Modeling Method by Formative RLC Cells for Lossy Transmission Lines

非均匀介质中非对称耦合传输线的ABCD参数

The ABCD Parameters for Asymmetric Coupled Lines in Inhomogeneous Medium

用FDTD数值方法研究了用于微带传输线的1D和2D的PBG（PhotonicBandGap）光子带隙结构。

The 1 D and 2 D photonic band gap ( PBG ) structure used in microstrip was studied by using FDTD technique .

带DGS的互补型传导传输线双模滤波器

Design of Dual-mode Filter with Complementary Conducting Strip Line and Defected Ground Structure

利用时域反射技术（TimeDomainReflectometry，TDR），由测量得到的时域反射信号，可以重构出非均匀传输线的一些特征参数。

With time domain reflectometry technique , characteristic parameters of a nonuniform transmission line can be recovered from the corresponding reflection signal measured in time domain .

半导体器件中金刚石散热器热性能的传输线矩阵（TLM）法分析

Thermo Properties Simulation for Diamond Radiator in Semiconductor by TLM Method

在频域内，均匀传输线两端的电压电流满足一组简单公式，将这组公式利用Taylor级数进行近似，通过逆拉氏变换得到一组时域内的递归公式。

The Taylor approximation is employed in the frequency domain , then a set of recursive formulas is derived by the inverse Laplace transform .

本文提出一种计算微带传输线的新方法，它是从场匹配出发，通过引入傅里叶变换建立了谱域中SLE和SLM模的等效电路。

An efficient hybrid field solution to microstrip transmission lines is presented by using SLE and SLM modes in spectral domain .

微型平面传输线中最基本最重要的一种传输线共平面波导（CoplanarWaveguideCPW）在微波电路中已被广泛地应用和实现。

The most important and basic transmission line is coplanar waveguide ( CPW ), which has been widely used in microwave circuits .

根据传输线理论，提出端接迹线最大匹配长度值限定法，结合PCB设计，可避免端接失配反射。

The maximum matching length of termination trace based on the transportation theory was set up , which was helpful to decrease the termination reflection in PCB designing .

具有阶跃阻抗结构的传输线谐振器（SIR）结构简单，在不减小无载Q值的情况下，可以大幅缩短谐振器的长度。

The Resonator configuration with the transmission lines which has stepped impedance structure ( SIR ) is simple . On keeping the Unloaded-Q situation , we can shorten largely the Resonator length .