乙丙橡胶

  • 网络EPDM;Ethylene-propylene rubber;ethylene propylene rubber;epr;EPM
乙丙橡胶乙丙橡胶
  1. 高耐热乙丙橡胶复合材料的制备与性能

    Preparation and Properties of High Heat Resistance EPDM Composite

  2. 吉化乙丙橡胶挤出制品配方设计

    JCIC EPDM extruding profiles formula design

  3. 采用自制的马来酸酐接枝三元乙丙橡胶/线形低密度聚乙烯共混物((EPDM/LLDPE)-g-MAH),通过熔融共混挤出对回收光盘聚碳酸酯(PC)进行增韧。

    Recycled CD Polycarbonate was toughened by maleic anhydride grafted EPDM / LLDPE through melt extrusion .

  4. 对于不同的交联体系、三元乙丙橡胶(EPDM)进行了对比试验。

    Contrast test of EPDM was performed for different crosslinking systems .

  5. 介绍了改性膨润土在三元乙丙橡胶(EPDM)无卤阻燃胶料中的应用。

    The modified bentonite was applicated in halogen-free flame retardent EPDM .

  6. 美国DuPontDow公司的新型三元乙丙橡胶NordelIP

    The new EPDM nordel ip of Du Pont Dow of american

  7. 对聚丙烯(PP)/三元乙丙橡胶(EPDM)共混合金的结构与性能进行了研究。

    The structure-property relationship of ethylene-propylene terpolymer ( EPDM ) / polypropylene ( PP ) blends was studied .

  8. 将粉煤灰与三元乙丙橡胶(EPDM)混炼后与聚丙烯树脂熔融共混进行增韧改性。

    Polypropylene was modified by using smelted ash powder / EPDM rubber blends as toughener .

  9. 改性FS对丁苯橡胶、三元乙丙橡胶、丁腈橡胶、羧基丁腈橡胶具有良好的增强效果。

    Modified FS had good reinforcing effect on SBR , EPDM , NBR and CNBR .

  10. 应用SEM、XPS等技术研究了加速气候老化对乙丙橡胶表面结构的影响。

    Through accelerated weather aging , surface structural changes of EPDM rubber were investigated by XPS and SEM techniques in this paper .

  11. 加入超细改性无机刚性粒子提高三元乙丙橡胶(EPDM)的硬度,再与聚丙烯(PP)进行共混。

    Modified EPDMs of different hardness were prepared by adding some ultra fine fillers into them , then blended with PP.

  12. 制备了低密度聚乙烯(LDPE)/二元乙丙橡胶(EPM)/炭黑导电复合材料。

    The conductive composites of LDPE / EPM / carbon black were prepared .

  13. 纳米CaCO3对三元乙丙橡胶(EPDM)材料力学性能影响研究

    Study on the Impact of Nano-meter CaCO_3 on the Mechanics Properties of EPDM Rubber Material

  14. 提高电线电缆用三元乙丙橡胶(EPDM)材料的拉伸强度和伸长率。

    Improved tensile strength and elongation of ethylene propylene diene monomer ( EPDM ) compounds used for wire and cable .

  15. 研究结果表明,5%的三元乙丙橡胶即可大幅度提高LLDPE的弯曲疲劳性能;

    The results showed that the bending fatigue property of LLDPE was improved with 5 % of EPDM .

  16. 以丙烯酸酯橡胶(ACM)和三元乙丙橡胶(EPDM)为主要原料制备共混材料。

    The blend of acrylate rubber ( ACM ) and ethylene propylene diene terpolymer ( EPDM ) was prepared .

  17. 综述了动态全硫化三元乙丙橡胶(EPDM)/聚丙烯(PP)共混型热塑性弹性体相结构、性能、加工成型及应用。

    Phase structure , property , processing , molding and application of dynamic fully vulcanized EPDM / PP thermoplastic elastomer were summarized . [ WT5HZ ]

  18. 在聚丙烯(PP)中加入10%~40%质量份数的聚对苯二甲酸乙二脂(PET)、反应增容剂三元乙丙橡胶接枝甲基丙烯酸缩水甘油酯(EPDM-g-GMA)及成核剂对PP进行共混改性。

    Polypropylene is modified by reactive blending with PET ( 10 % ~ 40 % Wt ), reactive compatibilizer EPDM-g-GMA and nucleating agent .

  19. 试验研究了纳米SiO2改性三元乙丙橡胶/聚丙烯(EPDM/PP)热塑性弹性体(TPE)的性能。

    The properties of nano-SiO2 modified EPDM ( ethylene-propylene diene monomer ) / PPTPE were studied in this paper .

  20. 重点讨论了发泡剂AC、交联剂DCP对低密度聚乙烯/三元乙丙橡胶(LDPE/EPDM)发泡工艺的影响。

    The influences of chemical blowing agent AC and cross - link agent DCP on LDPE / EPDM foam forming technology were discussed in detail .

  21. 比较了不同的动态硫化工艺和硫化体系对聚丙烯(PP)/三元乙丙橡胶(EPDM)共混物性能的影响。

    Effectiveness of different dynamic sulfurization processes and sulfurization systems to the properties of polypropylene ( PP ) / ethylene-propylene diene copolymer ( EPDM ) blends is compared .

  22. 研究了采用聚氯乙烯(PVC)、三元乙丙橡胶(EPDM)为主体材料,氯化聚乙烯(CPE)为增容剂,并配以其他助剂制备PVC/EPDM合金。

    The alloy with main materials of polyvinyl chloride ( PVC ), ethylene-propylene-diene monomer rubber ( EPDM ) and chlorinated polyethylene ( CPE ) as compatibilizer was studied .

  23. 介绍了汽车柴油发动机中冷器出气胶管的特点,比较了硅橡胶与三元乙丙橡胶(EPDM)的性能特征。

    The characteristics of diesel engine intercooler rubber tubes are introduced , and the performances of silicone rubber and EPDM rubber are compared in the paper .

  24. 用浓硫酸和醋酸酐与三元乙丙橡胶(EPDM)反应制备了磺化三元乙丙橡胶离聚物(S-EPDM)。

    Sulfonated EPDM ionomers ( S-EPDM ) were prepared with concentrated sulfuric acid and acetic anhydride .

  25. 以氯化乙丙橡胶(CEPDM)为相容剂,研究了SBS对PVC的共混增韧改性。

    The toughened effect of SBS on PVC was by use of chlorinated ethylene propylene rubber ( CEPDM ) as the compatibilizer .

  26. DSC分析和热老化实验表明,红磷对三元乙丙橡胶材料的热老化稳定性有不良影响,可通过调整配方加以解决

    The results of DSC and thermal aging tests indicate that the addition of red phosphorus decreases the thermal aging stability of EPDM . This problem can be resolved by adjusting the components

  27. 针对试验数据进行了方差计算,建立了乙丙橡胶电缆基于Arrhenius公式的加速热寿命模型。

    Meanwhile , thermal aging model of EPR cable based on Arrhenius equation was calculated by using variance analysis to the test data .

  28. 研究了三元乙丙橡胶(EPDM)和溴系阻燃体系对微孔LDPE隔热保温性能、力学性能和阻燃性能的影响。

    The effect of Ethylene propylene terpolymer ( EPDM ) and bromine fire-retardant system on the heat insulation performance , mechanics performance and fire retardance of microporous LDPE was studied .

  29. 探讨了硅烷接枝二元乙丙橡胶(EPMgS)作相容剂对EPDM/甲基乙烯基硅橡胶(MVQ)共混物的改性及改性机理。

    The EPDM / MVQ was modified by using the silane grafting EPM ( EPM g S ) as the compatibilizer and the modification mechanism was discussed .

  30. 使用的原料有硅橡胶、氟橡胶、天然橡胶、氯丁橡胶、三元乙丙橡胶、丁基橡胶、聚氨脂橡胶、聚乙烯、聚丙烯、EVA、ABS、PP、PVC等。

    The main materials we used are including silicone rubber , fluorubber , natural rubber , neoprene rubber , EPDM , butyl rubber , polyurethane , polyethylene , EVA , ABS , PP , and PVC .