xrd

The morphology , chemical composition and sturcture of electrolytic colouring coating on stainless steel were studied by means of SEM , EPMA and XRD .

用扫描电镜、电子探针、x-射线衍射等技术研究了不锈钢着色膜的形态、成分和结构。

The metal elements and forms of abradant were analyzed by AES and XRD .

磨料部分通过原子发射光谱和x射线衍射法进行金属元素及形态分析。

The results showed that the peak strength is different in XRD .

结果表明，二者XRD谱只是峰强有所不同。

XRD study of coal structure

煤的XRD的结构分析

The average particle size analysed with XRD is 16.7 nm .

用X射线衍射（XRD）分析得到的平均粒径16.7nm。

XRD intensity calculation and electron density function of Lib compound

LiB化合物X射线衍射强度计算与晶胞中电子密度分布

The catalysts were characterized with XRD , nitrogen adsorption , etc.

用XRD，N2吸附脱附等方法研究了催化剂的结构与催化性能的关系。

The crystal structure and reaction progress were investigated with XRD and TG-DTA .

借助XRD和TG-DTA等测试手段对材料的晶体结构和反应过程进行了分析。

The microstructure of zinc coatings was studied by SEM and XRD .

并用SEM，XRD研究锌镀层的微观结构。

XRD studies on binder phase transformation of WC-Co hard metals

WC－Co合金粘结相Co相变的X射线衍射分析

In these methods , TEM and XRD are the main methods because the technology is more mature .

其中透射电镜观察法和X射线衍射线宽法由于技术成熟，是现在纳米颗粒测试的主要方法；

XRD results indicated that the products are of cubic zinc blende structure .

XRD研究表明，产物为立方闪锌矿结构；

The microstructure and phase of the composite were tested with SEM and XRD .

应用SEM和XRD分析了复合材料显微组织和物相结构。

XRD studies and electrochemical surface spectrum of ruo_2-sno_2 Mixed Metal Oxides Electrode

RuO2-SnO2电极的XRD分析和电化学表面谱

The formation of inclusion compound was confirmed by means of IR and powder XRD .

采用IR、粉末XRD分析方法确定了包结物的形成。

The microstructure , surface composition and structure were investigated by SEM , XRD and XPS .

利用SEM，XRD，XPS研究氮化层的显微组织、表面成分、结构。

The phase composition and microstructure of the powders were studied by XRD and TEM .

用XRD，TEM测试手段对产物的物相和微观结构进行了表征和分析。

The phase , pattern , element composition and structure were analyzed by XRD , SEM and CCD .

通过XRD、SEM和CCD等测试手段对其物相、形貌、元素成份和结构进行了表征。

Also , it carries out a XRD analysis of the structure of Ni-Mo alloy deposition layer .

利用XRD研究了Ni-Mo合金沉积层的结构。

Through XRD , DSC / TG , SEM on product characterization tests .

通过XRD，DSC/TG，SEM对产物进行了表征测试。

And uses XRD to study the phase transition of the TiO_2 powder body in the roasting process .

并利用X射线衍射法对所制得的二氧化钛粉体进行表征，研究了TiO2粉体在焙烧过程中的相转变。

Microstructure Changes of PAN-Based Carbon Membrane during Pyrolysis in Vacuum by Raman and XRD Analysis

用Raman和XRD研究聚丙烯腈在真空热解过程中形成炭膜时微观结构的变化

Thermal Stability of MC Nylon 6 / ZnO Nanocomposite Based on Method of in situ XRD

MC尼龙6/纳米ZnO复合材料热稳定性的原位XRD法研究

Study on XRD Spectra of Graphite and Graphite / Bismaleimide Antifriction Composites

石墨及石墨/双马来酰亚胺减摩树脂复合材料的XRD研究

Over the 2 θ range of 10 °~ 130 °, the powder XRD was performed at room temperature .

在10℃～130°的2θ扫描角范围内，在室温下进行粉末X射线衍射。

The X-ray diffraction ( XRD ) technique was employed to study the microstructure of the Cu films .

同时用X射线衍射（XRD）技术测量分析了薄膜的微结构以及Cu膜的微结构对其应力的影响。

Its decomposition process in 25 ℃ ~ 900 ℃ was probed in situ by the high temperature XRD .

现场高温XRD测定其在25℃~900℃的热分解过程。

Study on crystallization course of titanium silicalite molecular sieve by XRD and FT-IR spectroscopy

钛硅分子筛晶化过程XRD和FT-IR的研究

Their microstructure and electric properties have been studied by means of XRD , SEM and LCR .

利用XRD，SEM，TH2816型宽频LCR数字电桥等手段研究了陶瓷的显微结构及电学性能。

Study of the reducing mechanism of lanio_3 by track tpr-gc and XRD techniques

利用跟踪TPR-GC和XRD技术考察LaNiO3的还原机理