solidus

  • 网络固相线;斜线;苏勒德斯
solidussolidus

noun

1
a punctuation mark (/) used to separate related items of information
Synonym: slash virgule diagonal stroke separatrix
2
a gold coin of the Byzantine Empire;widely circulated in Europe in the Middle Ages
Synonym: bezant bezzant byzant

数据来源:WordNet

  1. The solidus temperature of the cratonic lithospheric peridotite fell due to the long-term metasomatism of the mantle molten / fluid bodies .

    古老岩石圈橄榄岩的固相线温度受地幔熔/流体的长期交代而降低。

  2. From the experimental data , the pouring temperature , liquidus and solidus temperatures of the alloy are obtained , and the solidification range of the alloy is determined as 71 ℃ .

    测试了合金的浇注温度,液相线温度和固相线温度,得出合金的凝固温度区间为71℃。

  3. On the Solidus of Primary Metallic Solid Solutions

    初级金属固溶体的固相线

  4. Slant ( slash ): The oblique line used to separate one element from another . Also called Solidus .

    斜笔(斜线):用来分隔两种不同要素的斜线。

  5. Regression Analysis and Measurement for the Coefficient of Thermal Expansion of Eutectic Al-base Alloys at Solidus

    共晶铝合金热膨胀系数的测定与回归分析

  6. Computerized prediction of liquidus and solidus curves of binary alloy systems of transition metals with continuous solid solutions

    过渡金属二元连续固溶系液相线、固相线的计算机预报

  7. Calculation of pyrometric solidus composition of magnesia refractory of the system m-ma-m2s-cms

    M-MA-M2S-CMS系镁质耐火材料高温固相组成的计算

  8. Semi-solid processing is a new method proceeding between solidus and liquidus over convertional casting and forging .

    半固态加工是在液固相区进行的一种新型加工方法。

  9. With the increase of the Bi content , the solder joint strength rises , but the liquidus temperature and the solidus temperature decrease .

    随着Bi含量的增加,钎焊接头抗拉强度也随着增加,同时钎料的液固相线温度均降低。

  10. When the crystallization temperature is blow the solidus , non-oscillatory zoning or dendritic crystal and glass mass will be formed .

    当结晶温度低于团相线温度时,则形成非韵律环带或枝晶甚至玻璃体;

  11. The sintering temperature is selected as about 1100 ℃ because the solidus temperature of the ball-milled high-alloying tool steel powders is 1085 ℃ .

    球磨后的高合金工具钢粉末固相线温度为1161℃,确定烧结温度范围为1100℃左右。

  12. By XRD , SEM and DSC methods , the microstructure , element distributions and temperature of solidus and liquidus of Ni Cr B alloy ribbon were studied respectively .

    利用DSC,XRD和SEM等方法对急冷Ni-Cr-B合金箔带的固液相线的温度,结构及成分分布进行了研究。

  13. This system contains four modules : data input , data update , data search and solidus / liquidus temperature calculation , which can achieve managing the thermal physical parameters expediently and efficiently .

    系统包括参数录入、数据更新、数据查询和液固相线温度计算模块,实现了对参数数据的集中有效管理。

  14. The generic name stems from the Latin solidus ," whole ," probably in allusion to the reported properties of the goldenrods to heal wounds .

    通用名称源于拉丁文固、“大局”的报道可能针对性能的黄花来疗伤。

  15. The calculated liquidus and solidus are in agreement with experimental information and other assessed papers , moreover , the evaluated results about ordered phases are better than that of first principle .

    在固液相图部分,其结果与实验信息和文献评估一致;在有序无序部分,其结果优于第一原理预测的结果。

  16. The liquidus and solidus in the mushy zone was calculated based on back diffusion and a database for multi-component steel with the thermal-physical parameters depended on composition , temperature and solid fraction .

    该模型根据糊状区溶质传输和反扩散理论,基于变热物性参数,采用钢中多组元成分的百分含量计算液、固相线温度。

  17. The increase of fluorine content might have resulted in the decrease of solidus temperature and benefited the evolution of magma and the formation of K feldspar and albite approximately with end member composition .

    较高的F含量使岩浆固相线温度大大降低,有利于岩浆分异演化并形成接近端员组分的钠长石和钾长石;

  18. The results indicate that the welding temperature is the most important factor for diffusion welding of composite . When the welding temperature range is between solidus and liquidus , the peak joint strength can reach 170 MPa .

    指出焊接温度是复合材料扩散焊接最重要的工艺参数,焊接温度介于基体合金固相线与液相线之间,接头强度最高值可达到170MPa;

  19. The liquidus temperature , solidus temperature and crystal interval of Al-11.4 % Cu alloy are determined by testing and analysing the resistance of Al-11.4 % Cu alloy solidified under an alternating magnetic field .

    通过测试和分析Al-11.4%Cu合金在交流磁场中凝固的电阻,确定了合金液相线和固相线温度以及结晶区间。

  20. The 7075 Al alloys were solidified under DC or AC magnetic field with magnetic density 0.06 T respectively . The liquidus and solidus temperatures of the alloy at different conditions were determined by recording resistance-temperature curves during solidification .

    分别使7075铝合金在磁场强度为0.06T的直流磁场或交流磁场作用下凝固,通过在凝固过程中测定电阻温度曲线,确定了合金在不同条件下凝固的液相线和固相线温度。

  21. The results show that ( AgCu_ ( 28 )) _ ( 80 ) In_ ( 11 ) Sn_9 alloy has a low solidus temperature and melting range , a simple phase structure and a moderate spreading ratio .

    结果表明:(AgCu28)80In11Sn9合金具有较低的固相线温度和熔程、简单的物相结构、适中的铺展率。

  22. When hot pressed at the temperature which is higher than the solidus curve and hot extruded at the temperature which is lower than that , the strength of the composite is stronger due to the high strength of metal matrix and interfacial cohesion .

    在高于基体固相点温度热压烧结而低于固相点温度热挤压时,金属基体强度高且界面结合牢固,复合材料的性能最佳。曲线流有着非常广泛的应用。

  23. The temperature at the bottom of the lithospheric mantle was higher than the wet solidus temperature of peridotite before the thickening of the lithosphere , and was affected by the thickening-related dehydration of amphibole and phlogopite .

    增厚前岩石圈地幔底部温度高于橄榄岩湿固相线温度,并受闪石和金云母高压脱水作用的影响。

  24. A mineral assemblage of quartz + alkali feldspar + mica + fluorite , coexisting with melt phase , is obtained in the melting crystallization experiments above solidus in the F rich granite HF H2O system at 570 ~ 700 ℃ and 100 MPa .

    通过花岗岩-HF-H2O体系的熔化-结晶实验,在570~700℃、100MPa条件下获得了与淬火玻璃共存的石英+碱性长石+云母+萤石的矿物组合。