plla
- 网络聚乳酸;聚左旋乳酸;聚L-乳酸;左旋聚乳酸
-
Under the current situation , PLLA arouses wide public attention .
在这种形势下,聚乳酸的研究引起了人们的广泛关注。
-
Primary Study of Characteristics and Biocompatibility of the O , O-Dilauryl Chitosan / PLLA Blend Membrane
O,O-双十二酰基壳聚糖/聚乳酸复合膜的特性和生物相容性的研究
-
Study on Preparation and Morphology Structure of PLLA Cell Scaffold
PLLA细胞支架的制备方法及形态结构的研究
-
The glass transition temperature of PLLA decreased with the increase of cooling rate .
玻璃化温度和结晶度随着降温速率的降低而增大。
-
Preparation and Evaluation of PLLA / PLGA / HA Composite Material
PLLA/PLGA/HA复合材料的制备与评价
-
Experimental results show that high molecular weight PLLA can be obtained by control of the polymerization conditions .
研究结果表明:通过对聚合时间以及引发剂用量的控制,合成出高分子量聚L-乳酸。
-
The degradation of PLLA fibers was the main reason of the release .
PLLA纤维的降解速度是药物释放的主导因素。
-
The results showed that PLLA crystallization mechanism was heterogeneous nucleation and three dimensional growth .
结果表明,PLLA为异相成核,三维球晶生长机理。
-
It was found that PLLA melt was shear thinning fluid .
结果表明:PLLA熔体属于切力变稀流体;
-
Progress in Researching of Biodegradable Internal Fracture Fixation of PLLA
聚L-乳酸可降解内固定支架研究进展
-
Structure and Properties of PLLA / LDH Composite
PLLA/LDH复合材料的组织结构与性能
-
Research on the preparation and performance of the PLLA / β - TCP Internal fracture fixation Composite materials
PLLA/β-TCP复合骨折内固定材料的制备与性能研究
-
The Mechanical Properties and Degradation Behavior in vitro of PLLA / PDLLA Blends
PLLA/PDLLA共混物的力学性能及体外降解特性研究
-
Experimental Study of Biodegradation and Mechanical Properties of New Absorbable Material PLLA / PLLA-gHA
新型可吸收材料PLLA/PLLA-gHA的生物降解性及生物力学性能的实验研究
-
The TIPS Preparation and Properties of CP / PLLA Composite Scaffolds for Bone Tissue Engineering
相分离法制备骨组织工程用CP/PLLA复合支架及性能表征
-
PLLA would undergo three processes of melting , carbonization and oxidation in the sintering process .
发现在烧结过程中,PLLA会经历熔融、碳化、氧化三个过程。
-
Electrospun PLLA scaffold of blood tissue engineering modified by lecithin
电纺丝方法制备卵磷脂改性聚乳酸血管组织工程支架材料
-
The results showed that the graft copolymers had short PLLA and PGA lateral chain .
结果表明,接枝共聚物具有较短的聚L-丙交酯(PLLA)和聚乙交酯(PGA)侧链。
-
In vitro release data indicated that drug-loaded PLLA film could slowly release drug for a long period .
体外缓释实验表明载药PLLA膜具有长期缓慢释放药物的性能。
-
The effect of different proportions of PLLA on the sintering behavior of HAP was investigated .
研究了不同PLLA含量对HAP烧结性能的影响规律。
-
The results showed that compatibility of PLLA / PVA was improved and the mechanical strength was enhanced .
结果表明,PLCA的加入使PLLA/PVA复合体系的相容性及力学性能得到了明显的改善。
-
Effect of metallic oxide on the biodegradability of PLLA
金属氧化物对PLLA降解性能的影响
-
The process built a foundation to produce PLLA fibre by means of melt-filature .
以PLLA为原料,对聚乳酸熔融纺丝&热拉伸工艺进行了初步实验,为通过熔融纺丝方法制备聚乳酸纤维提供了依据。
-
Optimization of Preparation Parameters for Gentamicin-loaded PLLA Nanoparticles and the Drug Release Behavior In Vitro
载硫酸庆大霉素聚乳酸纳米粒制备的正交设计及体外释药行为研究
-
Conclusion The three dimensional PLLA scaffold is a good supporting material for the cultivation of fetal liver cells .
结论三维PLLA支架是胚胎肝细胞培养的良好支持物;
-
Evaluation on the property and preparation technique of HAp / Col / PLLA drug carrier ;
羟基磷灰石/胶原/聚乳酸药物载体制备后的性能及制备工艺评估。
-
Molecular Interaction in PLLA / PVA / PLCA Blend System
PLLA/PVA/PLCA三元共混体系分子间相互作用
-
Synthesis and Characterize of PVA - G - PLLA Brush - Like Graft Copolymer
聚乙烯醇-g-聚乳酸接枝共聚物的合成与表征
-
Study On Dry-Wet Spinning PLLA / CHS Fiber Braid as Culture Carrier In Vitro
干湿纺聚乳酸/壳聚糖纤维交织织物作为细胞体外培养载体的实验观察
-
Preparation of and study on the CPP / PLLA composites of scaffolds for cartilage tissue engineering
CPP/PLLA软骨组织工程支架复合材料制备及其性能表征