plate tower

美 [pleɪt ˈtaʊər]英 [pleɪt ˈtaʊə(r)]
  • 网络板式塔
plate towerplate tower
  1. The development and Prospect of the plate tower technique in China

    我国板式塔技术发展及展望

  2. Analysis of Entrainment Phenomenon in Plate Tower

    板式塔的雾沫夹带现象分析

  3. Swirl Plate Tower Dual Alkali FGD Process in the Production of Practice

    旋流板塔式双碱脱硫工艺在电站锅炉中的应用

  4. Hydrodynamics of Catalyst Basket Packing Structure in the Vertical Sieve Plate Tower

    导流板,流体导向叶片垂直筛板塔内催化剂筐式装填结构的流体力学研究

  5. There 're two common absorption equipments used in industry , they are packed column and plate tower .

    工业中最常用的吸收设备有填料塔与板式塔。

  6. The application of stripping technology of overflow sieve - plate tower in the production of PVC

    溢流筛板塔汽提技术在PVC生产中的应用

  7. Application of the rotating plate tower with dual alkali process to treatment of flue gas from melter boiler

    旋流板塔双碱法在熔化炉废气脱硫除尘中的应用

  8. A New-style Vertical Anti-seepage Technique & Laying Plastic Vertically ; Hydrodynamics of Catalyst Basket Packing Structure in the Vertical Sieve Plate Tower

    一种新型垂直防渗技术&垂直铺塑垂直筛板塔内催化剂筐式装填结构的流体力学研究

  9. Experimental study on catalyst packing structure for catalytic distillation column in hydrolyzing methyl acetate Hydrodynamics of Catalyst Basket Packing Structure in the Vertical Sieve Plate Tower

    乙酸甲酯水解塔催化剂装填方式研究垂直筛板塔内催化剂筐式装填结构的流体力学研究

  10. Simulation and Analysis on the Two-Phase Flow Field in Rotating-Stream-Tray Absorber by Using CFD Method ; Swirl Plate Tower Dual Alkali FGD Process in the Production of Practice

    旋流板塔内两相流场的CFD模拟与分析旋流板塔式双碱脱硫工艺在电站锅炉中的应用

  11. By adopting the design , the utility model has the advantages of simple and rapid formation of tower plates of the plate tower with arbitrary number , and convenient installation and maintenance .

    采用上述设计的本实用新型具有可简单、快速地形成任意塔板数的板式塔、安装维修方便等优点。

  12. Considering material characteristics of clad steel plate tower , the procedure features : baiting , rolling circle , checking circle and welding should be emphasized in the manufacturing process of clad steel plate tower .

    从复合钢板材料特性出发,论述复合钢板塔在制造过程中应着重注意下料、滚圆、校圆、焊接等工序特点。

  13. A mathematical model has been obtained for heat and mass transfer in the vertical sieve plate tower by relying on the mature packed tower model and looking for the correlation of the plate tower and the packed tower .

    依托成熟的填料塔模型,通过寻找板式塔与填料塔之间的关联,求得垂直筛板塔的传热、传质数学模型。

  14. Pyrolusite sludge is used for removing SO_2 from a fume within a sieve plate tower . The effects of various factors on the desulphuration rate and the feasibility of the double tower circuit absorption designed are researched .

    在筛板塔内用软锰矿浆脱除烟气中SO2,研究各种因素对脱硫率的影响以及所设计的双塔循环吸收工艺的可行性。

  15. The mass transfer experiments were conducted in a stainless plate tower with the height of 0.4m and diameter of 0.75 by using cyclohexane and n-heptane as research media under the condition of atmospheric pressure and total reflux .

    实验以环己烷-正庚烷为物系,在常压条件下,以全回流的方式在高4m,直径0.75m的不锈钢精馏塔内进行了传质实验。

  16. As one of the important mass transfer equipments , plate tower is widely used in various separation processes . The fixed tray has the advantages of anti-clogging and low pressure drop , and is particularly suited to splodgy systems and susceptible to plugging mass transfer occasions .

    板式塔作为重要的传质设备之一,在各种分离过程中广泛应用,其中的固定阀塔板因具有压降低、抗堵塞能力强的特点,特别适合于有污垢、易堵塞的物系。

  17. The lead sintering gas in the smelter contains high and fluctuating SO 2 . The desulphurization rate with calcium sulphite and XP plate absorbing tower can reach about 95 % , with a cost of RMB371 / t. SO 2 removed ;

    冶炼厂铅烧结烟气中SO2浓度高,波动大,用亚硫酸钙脱硫法和XP型板式吸收塔脱硫,其平均脱硫率达95%左右,每吨SO2脱硫成本371元。

  18. Analysis on formation reasons for steel plate coil like tower and improvement methods

    钢板卷取机卷塔形的原因分析及其对策

  19. Approach of Using Steady Simulation to Determine Sensitive Plate of Distillation Tower

    稳态模拟法求取精馏塔灵敏板的途径

  20. Temperature Distribution and Sensitive Plate of the Tower for Separating Methanol

    脱甲醇塔的温度分布与灵敏板

  21. Potential Energy Principle and Calculation about Stability of Opening Thin Plate in Box Tower

    箱形井塔带孔壁板稳定问题的势能原理及其算法

  22. Welding Process for the Support in the Innovation of Efficient Tower Plate of Urea Tower

    尿素合成塔高效塔板改造中支架的焊接工艺

  23. Stressed Analysis Forced on Base Plate of Iron Tower 's Leg by Draw Stress

    铁塔塔脚脚底板拉应力作用下的受力分析

  24. Analysis and Precaution on Flaw in Thick Plate of Coke Tower Frame

    焦炭塔框架厚板裂缝的分析与预防

  25. A New Distillation Tray Plate & SDJ-Build-up Tower Plate

    一种新型蒸馏板式塔板&SDJ-组合塔板

  26. In order to ensure safe operation of vertical silos of steel plate and operating tower for new built grain storehouse , the deformation monitoring of three times loading procedure are performed .

    为确保某新建粮库的钢板立筒库和工作塔的安全运行,对其进行了三次加载过程的变形监测。

  27. The utility model is proper in configuration , smart in conceive , convenient to dispose pollutants and clean due to the inclined cooling water plate under the tower body and worth applying .

    本实用新型结构合理,构思巧妙,由于设于塔体下方的冷水盘采用倾斜设计,故便于排污、清洗,极具推广价值。

  28. A New Distillation Contact Plate & SD-Build-up Bubble-cap Tower Plate

    一种新型蒸馏接触板&SD-组合泡罩塔板

  29. As constrasted with tower unit made of single steel plate , complex steel plate tower needs high technology and is more difficult to be manufactured .

    复合钢板塔器较单一钢板塔器的制造技术要求高、难度大。

  30. Suppose that the reactants on enery plate reached complete mixing , the reaction conversion on every plate of the tower was calculated by using the mathematical model for multi-step reactor .

    假定酯交换塔中各层塔板上的物料为理想混合状态,引用多级串联反应釜的数学模型,校核了反应器中的塔板转化率,从而得出结论。