Plasticization

The results show that : the plasticization effect of glycerol is different from that of water .

结果表明，甘油增塑时，对淀粉流变性能的影响与水不同；

When plasticization ratio is higher than the critical value , the viscosity changes slowly ;

高于该临界增塑比时，体系粘度变化缓慢。

Study on Preparation , Properties and Structures of Cellulose Internal Plasticization

内塑化纤维素酯的制备、性能和结构研究

Study on Plasticization Mechanism of Starch Applied to Biodegradable Food Containers

淀粉的塑化机理及其在生物降解餐具上的应用研究

Investigation on shock wave plasticization effect of pure iron

工业纯铁爆炸冲击波增塑效应研究

Relation between welding technology and the degree of plasticization in the PVC films

焊接技术与聚氯乙烯薄膜塑化度的关系

Application of torque rheometer in plasticization property determination of PVC resin

转矩流变仪在测定PVC树脂塑化性能方面的应用

Analysis on Heat Transmission in Cooling of Plasticization Extruding

塑化挤出冷却中的热量传递分析

Effects of Plasticization and Modification on Mechanical Processability of Protein Plastics

增塑及改性对蛋白质塑料力学加工性能的影响

Research of plasticization for organic acid about soy protein isolate degradable plastics

有机酸对大豆分离蛋白可降解材料增塑作用的研究

The control of the strength of shear field , plasticization and production output can go on separately .

实现剪切场强度调节与熔体塑化和产量控制相分离。

Then water plasticization was the leading role . It made the material ductile and increased the impact strength .

然后水增塑成为主要因素，它使材料韧性增加，冲击强度增大；

Rheological and Phase Transition Properties of Thermoplastic Starch Under the Plasticization of Glycerol

甘油增塑热塑性淀粉的流变相变性质

Inner plasticization of modified starch and partial alcoholysis PVA can improve size and size film performance .

变性淀粉、部分醇解PVA等浆料的内增塑作用能显著改善浆液和浆膜性能；

Reinforcement and plasticization experiments on fiber cement

纤维水泥增强增韧实验

Plasticization mechanism of low molecular weight unsaturated polyester for zinc-neutralized sulfonated EPDM

低分子量不饱和聚酯增塑EPDM磺酸锌盐机理的研究

Compressed CO_2 has a plasticization effect on polymers such as polypropylene ( PP ) .

高压CO2对聚丙烯具有塑化作用。

The whole equipment has the advantages of high capacity , excellent plasticization , strong processing adaptation , easy operation and overhaul .

由于结构设计合理，因而具有产量高、塑化好、加工适应性强、造作简便、检修容易等优点。

The Plasticization Effect of Glycerin Monoethers on Regenerated Cellulose Film

甘油单醚类化合物对纤维素膜的增塑作用

The Funnel supplies the screw of plasticization in granulated of thermoplastic material .

料斗用于向螺杆提供颗粒状的热塑性材料以进行注塑。

Injection screw was one of the most key parts of injection molding machine that affected the melt conveying performance and plasticization effect directly .

注射螺杆是塑料注射成型机中最关键的零件，对物料的输送性能、塑化性能有着直接的影响。

A study of plasticization of isotactic polypropylene

等规聚丙烯的增塑研究

The plasticization could degrade part of macromolecular chains with high ML in SBR 1500 without lowering the physical properties of compounds .

GPC分析表明，高ML是由于微凝胶和高分子量部分含量高所致，塑炼可使高MLSBR1500中的部分大分子链降解，改善其加工性能而不降低胶料物理性能。

The plasticization of the material is affected by the non-freezing water in hydrogel rather than by the freezing water .

对凝胶体系具有增塑作用的是非冻结水而不是可冻结的结合水和自由水。

The results show that the glass temperature of polyester fiber treated with CWL has obviously dropped , therefore the plasticization effect is confirmed .

结果表明：助剂CWL处理后涤纶纤维的玻璃化温度明显降低，说明助剂CWL对涤纶纤维起到了增塑作用；

The significant reasons may be water plasticization , hydrolysis of waste fiber in hot water and formation of hydrogen bonds of unsaturated polyester and water .

其原因可能是水的增塑作用、废纤维能在热水中水解以及不饱和聚酯与水形成氢键。

Only one parameter is introduced to describe the plasticization effect , and it can be easily estimated by thermodynamic theory about the glass transition temperature depression .

对橡胶态适用的自由体积参数在此模型中保持有效，所引入的表达溶剂可塑化效应的唯一参数β可以通过计算玻璃化温度来确定。

Tests results show that CS-ACR - ⅳ can remarkably promote plasticization of R-PVC and decrease its apparent melt viscosity .

试验结果表明，CS－ACR－Ⅳ可明显促进R－PVC塑化，并降低熔体表现粘度。

Through plasticization and molding experiments , the technology rule of plasticization and molding of twin-screw machine is found and the main technology parameters are determined .

通过塑化成型试验，找出双螺杆机塑化成型的工艺规律，用正交试验确定工艺参数。

When plasticization ratio is equal to 2.8 , the pseudo-plastic degree of PEG binder system is the highest at 50 ℃ .

当增塑比为2.8时，聚乙二醇粘合剂体系在50℃假塑性程度最高。