fep

  • 网络聚全氟乙丙烯;氟化乙烯丙烯;游离原卟啉;氟塑料;红细胞游离原卟啉
fepfep
  1. The Study on Processing Technology of FEP Film

    聚全氟乙丙烯宽幅薄膜成型工艺的研究

  2. Design and production of cat . 5 data cable with FEP insulation

    FEP绝缘5类数据电缆的设计和生产

  3. Study of FEP / AlN Composites with High Thermal Conductivity and Insulating Properties

    聚全氟乙丙烯/氮化铝高导热绝缘复合材料的研究

  4. On relationship between blood lead , ALAD activity and FEP in different urban risk groups

    城市不同危险人群血铅与ALAD活性和FEP值的关系

  5. Study of the tribological behaviors of FEP / PTFE polymer blend based composites

    FEP/PTFE聚合物合金基复合材料的摩擦学特性

  6. Study on FEP Transfer Moulding Process

    FEP传递模塑成型工艺的研究

  7. Effects of alumina platelets on thermal conductivity of Al_2O_3 / FEP composite

    片状Al2O3对Al2O3/FEP复合材料热导率的影响

  8. Fluorinated ethylene propylene ( FEP ) is engineering plastic with good performance .

    聚全氟乙丙烯(FEP)是一种高性能的工程塑料。

  9. Investigation of latent iron deficiency in preschool children by FEP / Hb

    应用FEP/Hb评估学龄前儿童中的隐性缺铁

  10. Influence of Temperature on Tribological Properties and Preparation of Flame-sprayed FEP Coatings

    温度对火焰喷涂FEP涂层制备及摩擦学性能的影响

  11. The supermolecular structure of FEP copolymer and its influence on the cracking behavior

    聚全氟乙丙烯的分子聚集态结构及其对开裂性能的影响

  12. By analysis of system function and process / thread 's trait , the FEP soft frame is confirmed ;

    并根据通信前置机的功能分析以及进程和线程的特点,确定了系统的框架结构;

  13. Cross-platform operation is a problem that needs prior consideration and solution when the FEP system is designed .

    跨平台操作是前置机系统设计必须重点考虑和优先解决的问题。

  14. Study on Melt Viscosity of PP and FEP / PP Blends at Low Shear Rates

    PP及FEP/PP低剪切速率下熔体粘性研究

  15. Effects of PPS on the Microstructure and Properties of FEP / PPS Composite

    PPS对FEP/PPS复合材料结构与性能的影响

  16. Morphology of the free surface of FEP copolymers

    聚全氟乙丙烯自由表面的形态结构

  17. Application of FEP Heat Shrinkable Tubing to the Moulding of CFRP

    聚全氟乙丙烯(FEP)热收缩管材在CFRP成形中的应用

  18. Interrelation analysis of assay titer of HA and FEP among 3-12 years old children in Xining City

    西宁市3~12岁儿童Hb&SFEP测定值的相关分析

  19. The analysis results indicated that precise classification of disease types and biological function comprehension can be achieved directly with FEP .

    结果显示,基于功能表达谱可以得到高准确度的疾病样本分类结果,能够直接从功能水平上给出相应的生物学解释。

  20. Effects of Pretreatment on the Bonding Strength of PPS / FEP Composite Anti-corrosive Coatings

    表面预处理对PPS/FEP复合防腐涂层结合强度的影响

  21. A Study of the Joint Between Fluoroethylenepropylene ( FEP ) and Metal

    聚全氟乙丙烯塑料和金属连接试验研究

  22. In addition , the property of robustness against gene absence of the FEP based classification method was further shown by simulation analysis .

    通过仿真分析,进一步显示了基于功能表达谱的分类方法具有抗基因检测缺失的稳健性。

  23. FEP Liner suitable in vacuum tube .

    家有套在真空管合适。

  24. The finish coating was FEP , taking advantage of its excellent anticorrosive and heat - resisting properties .

    涂料面层为聚全氟乙丙烯(FEP),利用其优异的耐腐蚀耐热性能;

  25. SEM observation suggested that the wear mechanism of FEP coatings appeared to be obvious fatigue wear at relatively high temperatures .

    在较高的环境温度下,涂层的磨损呈现出明显的疲劳磨损特征。

  26. Conclusion : The anaemia due to chronic renal dysfunction is characterized of high level of FEP and overload iron .

    结论:肾性贫血具有FEP增高及铁负荷增加等特点。

  27. With the transition layer , tensile strength of the joint of FEP and stainless steel exceeds 16 MPa .

    采用自制的过渡层,利用模塑方法使FEP和不锈钢的粘接强度达到16MPa以上。

  28. Comparative study of FEP and FEM regimen combination with TACE plus PEI in the treatment of primary hepatic carcinoma

    FEP与FEM方案双途径介入治疗原发性肝癌的临床对比研究

  29. The FEP and total iron binding capacity of all dose groups were lower than that in model control group ( P < 0.05 ) .

    实验后各剂量组的FEP含量及血清总铁结合力均低于模型组(P<0.05)。

  30. Piezoelectricity of electret hybrid films consisting of porous PTFE and teflon FEP

    多孔PTFE/FEP复合驻极体膜的压电性研究