dynaform

Quick Design of Deep Drawing Parts Die Based on DYNAFORM Platform

基于DYNAFORM平台的深拉伸件模具的快速设计

Braking Shell First Drawing Process Simulation Based on DYNAFORM and Die Design

基于DYNAFORM制动壳体件首次拉深成形仿真及模具设计

Application of Dynaform Numerical Simulation in Automobile Covering Parts Forming Process

DYNAFORM数值模拟技术在汽车覆盖件成形中的应用

The Numerical Simulation of Blank Hold Force of Cylinder Part Drawing Based on Dynaform

基于Dynaform的圆筒件拉深压边力数值模拟

Numerical Simulation Research for Hole-flanging Based on DYNAFORM Software

基于DYNAFORM的圆孔翻边数值模拟研究

Simulation and Analysis on wrinkling behavior of square box part in deep drawing based on DYNAFORM

基于Dynaform的方盒形件拉深起皱情况模拟分析

So in this paper finite element simulation software eta / Dynaform is applied in the study .

因此在本文中有限元板料分析软件eta/Dynaform被用于进行差厚拼焊板的成形性研究。

Numerical Simulation on Wrapping of Self-Lubrication Bearing Bush Based on DYNAFORM

基于DYNAFORM的自润滑轴套卷制成形的数值模拟

Stamping simulation of automobile lining panel based on Dynaform

基于Dynaform软件的汽车内衬板冲压成形模拟

Magnetic deformation process of sheet material conical parts simulated with the FEA software Dynaform .

利用Dynaform有限元分析软件对锥形件电磁成形板坯变形过程进行了模拟。

Widely adopting testing data and applying DYNAFORM to simulate bend and Spring Back of sheet .

采用更广泛的试验数据，运用DYNAFORM软件对薄板弯曲成形和回弹的数值模拟。

DYNAFORM , a professional stamping software developed by ETA CO.

简要介绍了美国ETA公司开发的专业冲压仿真软件DYNAFORM。

Finally , using the software DYNAFORM simulated a practical problem , to further validate spring-back curve .

最后，应用软件DYNAFORM模拟了实际问题，进一步验证了由三次样条曲线算得回弹曲线。

The stamping process of the tailor-welded blank was simulated by DYNAFORM software .

用DYNAFORM软件对拼焊板成形过程进行有限元模拟研究。

Research on blankholder methods of tailor-welded blanks in stamping based on dynaform

基于Dynaform的拼焊板冲压成形压边方法研究

The multi-stage forming optimize based on Dynaform

基于Dynaform的多次拉深工序优化设计

The finite element model was established for numerical simulation of stamping drawing with numerical simulation software ETA / DYNAFORM .

利用数值模拟软件ETA/DYNAFORM，建立冲压仿真有限元模型，进行冲压拉延仿真数值模拟。

With the FEM software eta / Dynaform various forming condition were simulated in square box deep drawing process .

应用FEM软件eta/Dynaform进行了大量的方盒形件模拟拉深试验。

Prediction of Stamping Process with DYNAFORM

用DYNAFORM软件预测冲压工序

Press ( down ) the accelerator of a car Stamping simulation of automobile lining panel based on Dynaform

踩（下）汽车的油门基于Dynaform软件的汽车内衬板冲压成形模拟

Next the process is analyzed and optimized by adjusting the shape of blank with dynaform . The best results are gained .

接着利用Dynaform软件分析板料成形过程，通过调整板料形状，对拉深件的成形进行优化得出最佳结果。

In this paper , the relation of springback simulation and mesh size is studied with DYNAFORM software , and the relative results are worked out .

本文就DYNAFORM软件中单元尺寸与回弹模拟计算的关系进行了研究，得出了相应的结论。

A numerical simulation on the drawing process of front-end panel in a TOYOTA car is conducted in the paper , using ETA / DYNAFORM software .

结合丰田轿车前围板拉延成形过程的数值模拟，探索了轿车覆盖件拉延成型数值模拟的一般过程。

The soft ware package of DYNAFORM / LS-DYNA on the basis of none linear explicit calculation method is adopted in the process of press numerical simulation .

本文所有的冲压数值模拟工作均采用了以非线性显式算法为基础的DYNAFORM/LS-DYNA软件包实施完成。

The numerical simulation of drawing process for car 's taillight pedestal is studied by using the three-dimensional sheet metal forming analysis and non-linear explicit algorithm software Dynaform .

采用基于动力显示算法的板料成形非线性有限元分析软件Dynaform对某轿车后灯座的拉深成形过程进行了数值模拟仿真。

At last , a real TWB part , the center pillar of car door was simulated by eta / Dynaform and according to its simulation results designed the die .

在本文的最后，分析了拼焊板零件的一个实例。这个零件是某轿车的中立柱加强件，应用eta/Dynaform进行了分析，设计了合理模具，减少了试模时间。

By analyzing the automobile filler box forming process feature , using the finite element software Dynaform based on explicit algorithm , the forming process has been analyzed , the rational forming process determined .

通过对加油口冲压成形特点进行分析，并采用基于动力显示算法的有限元分析软件Dynaform，对加油口成形工序进行了数值模拟，确定了合理的成形工艺方案。

At the same time , using simulation results of Dynaform to analyse stress and strain distributing of metal in the forming process , and gains curves of forming load in the different cases .

同时利用Dynaform的模拟结果，分析了金属成形过程中的应力、变分布，得到了不同情况下的成形载荷曲线。

According to the gridding test of drawing in the teaching of stamping , by sheet metal forming simulation software Dynaform , the whole drawing process of cylinder parts has been simulated .

根据冲压课程教学中的拉深网格实验，采用板料成形数值模拟软件Dynaform对圆筒形零件拉深工艺过程进行了模拟，并将模拟结果与理论压边力和物理实验结果进行了比较。

The bending and springback process of auto battery holder have been simulated by applying the dynamic explicit-static implicit united solving function of non-linear FEM of DYNAFORM .

本文利用Dynaform板料成形软件的动态显式与静态隐式联合求解功能，模拟了汽车电瓶支座冲压弯曲成形和卸载回弹变形整个过程。