首页 / 词典 / good

clamping

美 [ˈklæmpɪŋ]英 [ˈklæmpɪŋ]
  • v.被夹紧;(用夹具)夹紧,夹住,固定;被抓住;紧紧抓住;紧夹住;用夹锁锁住(车)
  • n.钳位
  • clamp的现在分词
clampingclamping

clamping

频次

  • 1
    N-COUNT 夹子;夹具;夹钳
    A clamp is a device that holds two things firmly together.

  • 2
    VERB (用夹具)夹紧,夹住,固定
    When you clamp one thing to another, you fasten the two things together with a clamp.

    Somebody forgot to bring along the U-bolts to clamp the microphones to the pole.

    有人忘了带把麦克风固定在支架上的U形螺栓。

  • 3
    VERB 将…固定(在某处);紧紧抓住
    To clamp something in a particular place means to put it or hold it there firmly and tightly.

    Simon finished dialing and clamped the phone to his ear...

    西蒙拨完号,把听筒贴在耳边。

  • 4
    N-COUNT (将违章停放的车辆扣在原地的)夹钳,车轮固定夹
    A clamp is a large metal device which is fitted to the wheel of an illegally parked car or other vehicle in order to prevent it from being driven away. The driver has to pay to have the clamp removed.

  • 6
    VERB 给(车辆)上夹钳
    To clamp a car means to fit a clamp to one of its wheels so that it cannot be driven away.

    Courts in Scotland have ruled it illegal to clamp a car parked on private ground and then to demand a fine.

    苏格兰法院裁定,将停在私人地界上的车辆上夹钳并索要罚款的行为是违法的。

  • The AA called for laws to regulate clamping firms.

    英国汽车协会呼吁立法,规范夹车公司的行为。

  • Private clampers demanded £17 to release her van.

    私人夹车者要求支付17英镑才让她把货车开走。

  1. Reliable Level Analysis to Hydraulic Clamping System Based on Fuzzy Gathering Theory

    基于模糊集理论的液压夹紧系统工作可靠度的分析

  2. Research on the clamping force of the new tool system for high speed machining

    HSK工具系统夹紧系统的研究

  3. Clamp one end of the plank to the edge of the table .

    把厚木板的一端用夹具固定在桌子的边上。

  4. Clamp the two halves together until the glue dries .

    用夹具把两半物品夹紧,待胶干后再松开。

  5. Banking regulators failed to clamp down until earlier this month .

    银行监管机构直到本月初才开始严格管制。

  6. Somebody forgot to bring along the U-bolts to clamp the microphones to the pole .

    有人忘了带把麦克风固定在支架上的U形螺栓。

  7. The team manager has been quick to clamp down on the merest hint of complacency .

    球队主教练很快就消除了自满的小苗头。

  8. Courts in Scotland have ruled it illegal to clamp a car parked on private ground and then to demand a fine .

    苏格兰法院裁定,将停在私人地界上的车辆上夹钳并索要罚款的行为是违法的。

  9. He used a clamp to hold the arm on the chair until the glue dried .

    他用夹子将扶手夹在椅子上,直到胶水干后再取下。

  10. Nail head clamp the unravelling of nail exteriorize broken nails and clean .

    钉头卡钉,拆开钉头取出碎钉并清洁。

  11. The metal sticks are typically extensible , with a handle on one end and an adjustable1 clamp on the other end to hold a phone in place .

    自拍杆的金属杆部分能够伸长,一端配有手柄,另一端配有可调夹头,用来在适当的位置固定手机。

  12. Research of the Optimal Model of Clamping System for Injection Molding Machine

    注塑机合模系统的优化模型研究

  13. A New Design of Clamping Unit Used in Blow Moulding Machine

    塑料中空成型设备锁模机构的一种新设计

  14. A new type of hydraulic electrode clamp for ladle furnace system

    钢包精炼炉新型液压电极夹持器

  15. Different measurement method – preparation , load in , clamp , skill .

    不同的测量方法–作业准备,载入,夹紧,技巧。

  16. The technique for welding clamp rapid reconfigurable design was studied .

    研究了汽车焊装夹具(Clamp)快速重构设计技术。

  17. Sealed bearing system reduces clamping pressure and increases bearing life .

    密封的轴承系统减少夹持力并增加轴承寿命。

  18. Next , the design principle of the active - clamp forward is presented .

    其次,介绍了有源箝位正激式变换器的主要器件的设计方法,并给出设计实例;

  19. The Principles and Application of Converter Supply with Active Clamp

    有源钳位变换器的工作原理及应用

  20. Perforated patch clamp technique and its applications in channel current study

    穿孔膜片钳技术在离子通道电流研究中的应用

  21. Calculation of Error of Tower Grounding Resistance Measurement Using Clamp Meter

    钳表法测量线路杆塔接地电阻的误差分析

  22. Input Filter and Voltage Clamp Circuit Design of Matrix Converter

    矩阵变换器输入滤波器和箝位电路设计

  23. A New Type of Pipe Clamp for Facing Machine

    一种新型的平头机夹管机构

  24. Design of a clamping and feeding mechanism for thin wire electrode

    微小电极夹持送进机构设计

  25. Methods : Cell - attached configuration of patch clamp technique .

    方法:细胞贴附膜片箝记录法。

  26. A kind simple method of processing the center bore by using boring clamp

    利用钻夹具加工中心孔的简易方法

  27. Main Problems in Clamping Systems of Injection Machines and Answers to Them

    注塑机合模装置存在的主要问题及解决方法

  28. Application of A New Lossless Clamp Circuit for Single Ended Forward Converter

    一种新型无损箝位电路在单端正激电源中的应用

  29. Design of Clamp for the Grinding of the Valve Body

    阀柜零件的内圆磨床夹具设计与研究

  30. The Improvement of Hydraulic Clamping System for Hot Forging Press

    热模锻造压力机模具夹紧液压系统的改进