cfx

Study on Optimized Design of Hydraulic Structure for PDC Bits Based on CFX

基于CFX的PDC钻头水力结构优化方法研究

The Design of Centrifugal Compressor 3-D Impeller Based on CFX Software

基于CFX软件设计离心压缩机三元叶轮

Programming calculation and CFX simulation have the same trend .

编程计算与CFX模拟计算热强度沿炉管变化趋势基本相同。

CFX is used to make a full study on the inner flow field and pump performance .

将所形成的结构化网格导入到流体计算软件CFX内，来进行内部流场和外特性研究。

Simulation Research of Silo Venting System by Software CFX

利用CFX软件对料仓通风系统进行仿真研究

The basic assumptions and governing equations of CFX finite element analysis software is given .

给出了本文计算的基本假设条件和CFX有限元分析元件的控制方程。

Numerical Simulation and Flowing Characteristic of Spray Fluidized Drying Process Based on Ansys CFX

基于ANSYSCFX喷雾流化干燥数值模拟与流动特性

Numerical Simulation of Aerodynamic Field in Furnace by CFX

基于CFX的炉内空气动力场的数值模拟研究

Numerical Simulation of Vertical and Horizontal Ventilation in the Piggery Based on CFX

基于CFX的猪舍纵向与横向通风流场模拟

The CFX software application in simulation , computation and results analysis for design and operation of cracking heater .

应用CFX软件对裂解炉中的关键技术的模拟、分析及计算情况的综述。

Computation of flow patterns inside interlacer jet based on ANSYS CFX

基于ANSYSCFX的网络喷嘴内部流场计算

The numerical simulation with CFX software is carried out at the same condition of the experimental measurement .

在实验测量工况下，采用CFX软件对实验工况进行了数值模拟。

Air temperature and airflow simulation in the weanling barn based on CFX

基于CFX的猪舍内温度和气流场模拟研究

The underwater glider motion performance is analyzed by a method using CFX hydrodynamic calculation software .

提出了采用CFX水动力计算软件分析水下滑翔机器人运动性能的方法。

Numerical Simulation of Airflow Pattern at Different Height of Bar in the Piggery Based on CFX

基于CFX的不同围栏高度猪舍内气流场模拟

Numerical Simulation of Wave Flume in the CFX

基于CFX的波浪水槽数值模拟

Numerical simulation was conducted by commercial software ANSYS CFX , and inhomogeneous free surface flow model was chose .

数值模拟采用ANSYSCFX商用软件，选择非均相自由表面模型。

The hydrodynamic parameters of constant gliding motion are identified with least square method based on CFX calculation results .

根据CFX计算结果，用最小二乘法参数辨识方法辨识出定常滑翔运动的水动力参数。

CFX could not inhibit the transport of ramipril .

CFX不抑制ramipril的肠转运。

The magnetic field analysis using ANSYS electromagnetic field module to analyze , the flow field analysis using ANSYS CFX simulation of three-dimensional visualization .

磁场的分析运用ANSYS电磁场模块进行分析，流场的分析采用ANSYSCFX进行三维可视化模拟。

The liquid-solid conjugate heat transfer in a narrow rectangular channel was numerical analyzed by using CFD code CFX .

本文采用CFD软件CFX对矩形窄缝通道内流固共轭传热进行了数值分析。

Based upon CFD software & CFX , the numerical simulation adopts Reynolds averaged Navier-Stokes ( RANS ) method .

数值模拟依托CFX软件平台，基于雷诺平均模拟（RANS）方法进行。

By contrast , a group of experimental data is used to compare with the data obtained by CFX simulation to investigate the validity of numerical method .

通过经验值和模拟值的比较，验证了计算机模拟研究的有效性。

In application of flow analysis software CFX , complete three-dimensional simulation of flow field and characteristics analysis of the damping valves and the overall chamber model .

应用CFX流场分析软件对减振器各阻尼阀模型及整体模型的内部流场进行了三维模拟及流场特性分析。

Or little known Colfax Corporation , CFX .

还有不知名的科尔法公司，CFX。

Using CFX , the numerical simulation of the core flow distribution was performed for China Advanced Research Reactor ( CARR ) with the porous media model .

应用计算流体力学软件CFX，采用多孔介质模型对中国先进研究堆（CARR）的堆芯流量分配进行了数值模拟。

In this paper , the problem of vortex-induced vibration of rectangular cylinder is numerical simulated using ANSYS , Workbench and CFD software CFX .

本文针对涡激振动现象，采用ANSYS+Workbench+流体计算软件CFX数值模拟矩形柱体的涡激振动问题。

The design process commences in shape , size and arrangement and uses CFX to simulate the variation of the flow field inside corresponding desulfurizing tower .

利用CFX软件模拟了破碎机构的形状、尺寸及排列方式等对气固接触的影响。

The predictions of resistance loss using CFX for two configurations of silencers are compared with experimental results , and the relative error is within 5 % .

用CFX计算了两种结构水消声器的阻力损失，并与实验结果进行了对比分析，其误差控制在5%以下。

Considering the effect of specific heat , the paper compiled several programs , which coded in Fortran language , used to deal with the result of CFX .

同时考虑变比热的影响，本文还用Fortran语言编写了一些程序，用来处理CFX的结果。