首页 / 词典 / good

SUS304

SUS304SUS304
  1. This machine is main use SUS304 stainless steel .

    本机主体使用SUS304不锈钢制作。

  2. Material : SUS304 or steel powder coated .

    材料:304不锈钢或钢板静电喷涂。

  3. The contact part with the material is of qualified stainless steel of SUS304 , meeting with GMP standard .

    本机组与物料接触部分全部采用优质不锈钢SUS304制造,符合GMP要求。

  4. The ice-on-coil material is SUS304 stainless steel with higher durability and anti-corrosion , offering longer life .

    盘管整体及支撑框架结构均采用SUS304不锈钢材料,盘管寿命长。

  5. The main equipment used in all SUS304 stainless steel plate , external mirror treatment , vacuum heat exchanger is of rubber ingredients necessary equipment .

    设备主体全部采用SUS304不锈钢板制造,外部镜面处理,是化胶配料真空换热的必备设备。

  6. Characteristics : All the materials used to produce stainless steel SUS304 , easy to clean pleasing in appearance , is the ideal product cleansing workshop .

    特点:本品全部采用SUS304不锈钢制作,外形美观易清洁,是洁净车间的理想产品。

  7. It is suitable for processing some hard processing material such as SUS304 , refractoloy and some soft materials such as SS400 etc.

    最适宜加工SUS304,因可耐尔镍基耐热合金等难加工材料与SS400等软材料。

  8. The automatic stopping device can be set within the range of 0-60 minutes for automatic stopping . Blades ( sus304 ) can be extra installed inside .

    设有自动定时装置,可设定0~60分钟自动停止。另有选配,内部加装叶片。

  9. Equipped with the steel water tank which is of high strength baking finish , stainless steel plunger ( SUS304 ) and pressure pipe with two moveable ends .

    配置有高强度烤漆钢板水箱,SUS304不锈钢活塞杆及双头均可活动的高压管。

  10. The influence of different laser-spot spaces on deformation results of SUS304 stainless steel sheet was studied , and simulated by Finited Element Soft-ABAQUS .

    实验研究了不同的光斑间距对SUS304不锈钢板激光冲击的变形影响,并用ABAQUS软件进行了有限元仿真分析。

  11. Function : cold and heat preservation type water container , the external layer may be assembled by SUS304 stainless steel , galvanized steel , and color steel embossing plate .

    使用功能:冷、热保温型水箱,外层可采用SUS304不锈钢、镀锌钢板、彩钢板凹凸板拼装。

  12. Remarkable austenite-martensite transformation occurs in SUS304 during fatigue test , on the other hand , almost no austenite-martensite transformation occurs in SUS304N .

    奥氏体组织的稳定性得到提高。疲劳实验过程中SUS304发生了显著的应变诱发马氏体转变,而SUS304N基本未发生此现象。

  13. The effects of welding speed , defocusing distance , laser power , shielding gas , activating flux and activating elements on weld shape in YAG laser welding of SUS304 stainless steel was studied .

    以不锈钢SUS304作为试验对象,分别研究了焊接速度、散焦离焦量、激光功率和保护气体等工艺参数以及活性剂和活性元素硫对不锈钢YAG激光焊焊缝成形的影响。

  14. Liner mirror imported SUS304 stainless steel , with acid-resistant , corrosion-resistant features are easy to clean independence , free loading and unloading shelf support for the cleansing of the box .

    内胆采用进口SUS304镜面不锈钢,具有耐酸、耐腐蚀易清洗特点独,搁板支架可以自由装卸,便于箱内的清洗工作。

  15. The drawing tests of stainless steel ( SUS304 ) with reaction bonded Si 3N 4 ceramics die lubricated with water base lubricant were carried out using a four columns YA 100 type drawing machine .

    在YA-100型四柱液压拉深机上,进行了用反应烧结氮化硅材料凹模拉深不锈钢(SUS304)的试验研究。

  16. Si 3N 4 ceramics die was prepared by the method of reaction bond , and tests of drawing stainless steel ( SUS304 ) with ceramics die lubricated with water base drawing lubricator have been carried out in YA-100 type drawing machine with four columns .

    用反应烧结方法制备氮化硅陶瓷材料模具,然后将其安装在YA-100型四柱液压拉深机上进行拉深不锈钢实验。