集流体

发现活性炭电极在硝酸钾等中性电解液中具有优越的电极性能，但存在金属集流体的腐蚀问题。

Activated carbon electrode was proved to have good capacitor performance in neutral electrolyte such as ammonium nitrate solution , but a correlated problem is the corrosion of the metal current collector .

介绍了全钒离子氧化还原液流电池（钒液流电池，VRB）的特点，它的关键材料，如电解液、集流体、电极材料以及隔膜等的研究现状和制约难点。

The properties of vanadium redox flow battery ( VRB ) were introduced . The research progress and restricted difficulty of its key materials , such as electrolyte , current collector , electrode material and member were also introduced .

以多孔铜为集流体制备Cu6Sn5合金负极及其性能

Fabrication and Performance of Cu_6Sn_5 Alloy Anode Using Porous Cu as Current Collector

SC型MH/Ni动力电池集流体设计的研究

Study on the current collector design of SC size Ni / MH power battery

MH-Ni电池负极集流体（铜网）对电池性能的影响

Effect of copper current collect on the performance of Ni - MH battery

Zn-In合金集流体在电池中的应用

Application of Zn-In alloy current collector in battery

通过解剖失效电池，利用物性分析及模拟试验，研究了MH-Ni电池在电池充放电过程中铜网负极集流体的变化及其对电池性能的影响。

The effect of copper current collect on its changes and the performance of MH-Ni battery was studied by dissection failure battery and simulation test .

介绍了一种集流体力学计算、孔系设计与校核、工程图绘制以及元件图库于一体的插装阀集成块CAD软件.提出了计算孔道最小壁厚的球面包络算法；

CAD software for hydraulic manifold block of cartridge valves is introduced which integrate calculation in hydromechanics , design and check of hole system , creation of engineering drawings by computer and element graphic lib . A spherical envelope algorithm for calculating the minimum distance between two holes is presented .

以泡沫镍为集流体的锌电极腐蚀性能

Corrosion behavior of zinc electrode on the nickel foam current collector

锂离子电池正极铝集流体耐蚀性能研究

Study on the Anti-Corrosion of Alumium Current Collector for Lithium-Ion Battery

全钒氧化还原液流电池集流体的性能

Properties of the current collector of all vanadium redox flow battery

碱锰电池中铜集流体上析出锌的机理

The mechanism of separate out zinc in copper current collector of alkaline

MH/Ni电池集流体用中空镍纤维毡

Hollow nickel fibre felt for current collector of Ni / MH battery

碱性锌锰电池负极集流体清洗工艺

The cleaning technics of current collector for alkaline Zn-MnO_2 battery

无汞碱锰电池负极集流体的表面处理

Surface Treatment of Negative Current Collector In Mercury-Free Alkaline Manganese Dioxide Batteries

负极集流体表面处理方法及对电池性能的影响

Surface Treatment Method of Cathodic Current-Collector and Its Effect on Performances of Batteries

发泡镍作为Li/SOCl2电池正极集流体的研究

Study on foamed nickel as positive current collector in Li / SOCl_2 battery

集流体材料铜薄膜中锂离子输运机制的第一性原理研究

First-Principle Investigation of Li Diffusion in Copper Thin Film

碱锰电池集流体铜钉化学抛光工艺的研究

Study on Chemical Polishing Process for Current Collector in Alkaline Zn / MnO2 Battery

钒电池集流体用聚四氟乙烯导电塑料的制备与性能

Preparation and Performance of Polytetrafluoroethylene Conducting Plastic on Vanadium Redox Flow Battery ' Collector

化学镀铟集流体对锌粉析氢行为的影响

Effect of Current Collector Treated Electroless Plating Indium on Exhaustion Hydrogen Process of Zinc Powder

结果表明：电极集流体结构对其电化学活性有较大影响；

The results showed that the electrode current conductor influenced its electrochemistry reaction active of hydrogen ;

这一研究结果对以泡沫镍为集流体的锂硫电池具有很重要的指导意义。

This research finding was of great significance for the lithium-sulfur battery with Ni foam current collector .

探索川西南地区二叠系阳新统断层裂缝储集流体规律

A research on reservoir fluid in fault fissures in the Yangxing series of the Permian in Southwest Sichuan

负极集流体自动焊接机由自动进料器、进料盘、焊接盘与卸料系统等组成。

This automatic machine consisted of parts supplying feeder , feeding disk , welding disk and discharge disk .

结合生产实际，讨论了负极集流体的选择与处理；

Combined with the producing practise , discussed the selection and handling method of the negative current collector .

集流体铜钉酸洗工艺对碱锰电池性能影响

Effect of process conditions of current collector acidic cleansing on the performance of alkaline Zn / MnO_2 battery

报导了碱锰电池负极集流体自动焊接机的研制。

The automatic machine of anode current collector and bottom plate spot welding was designed and prepared successfully .

铜箔和铝箔集流体在其碳酸酯电解液体系中也具有较好的电化学稳定性、较宽的电化学窗口。

And the LiPF4C2O4 / carbonates electrolyte also shows wide electrochemical window on aluminum and copper foil electrodes .

采用脉冲电沉积与热处理相结合的工艺制备铜锡合金，并作为锂离子电池的负极考察其电化学性能。在集流体铜箔上直接沉积锡，然后进行热处理形成铜锡合金层。

A pulsed electrodeposition and heat-treatment process was used to prepare copper-tin alloys for the anode of lithium ion battery .