锌铝合金

  • 网络Zinc aluminum alloy;ZnAl;galfan
锌铝合金锌铝合金
  1. 介绍了在锌铝合金工件的连接和修复中常用的3种方法:气焊、TIG焊及钎焊;

    Methods usually used in joining and repairing of zinc-aluminium alloy parts such as flame welding , TIG welding and soldering were introduced .

  2. 通过ZA系列锌铝合金轴套的研制和装机试验,进一步证明其耐磨性能。

    Through development and on-board test of ZA alloy bushing , its wearing performance has been further demonstrated .

  3. ZA系列锌铝合金作为耐磨材料在工程机械中用以替代青铜合金具有很大的经济效益。

    As a wearable material , the application of series ZA alloy instead of bronze in construction machinery will yield great profit .

  4. 本文采用超音速雾化快速凝固技术制备锌铝合金(ZA20)粉末。

    This article prepares some Zn-Al ( ZA20 ) powders with the method of ultrasonic atomizing quick solidification .

  5. 采用挤压法试验生产的ZA12锌铝合金轴套,制品表面光洁、无裂纹;显微组织和机械性能均优于铸件;

    The sleeve , which is produced by extruding and is made from ZA12 Zn-Al alloy , has high surface finish and no crack on its surface .

  6. 对二种锌铝合金ZA-Si和HDZA在20号机油润滑条件下的摩擦磨损特性进行了研究。

    The frictional wear performance of two kinds of Zinc Aluminium alloys ( ZA Si and HDZA ) under oil lubricating condition have been studied in this thesis .

  7. 在锌铝合金中加入适量稀土可以明显细化晶粒,根据hall-petch关系式,合金性能也将得到提高,从而扩大合金的应用范围,成为黄铜、锡青铜、铝青铜和铅基巴氏合金的良好替代材料。

    Consequently , according to hall - petch formula , the properties of the alloys are improved so that the application range of the alloys will be extended and can be used as a substituent of brass , bronze and leaded babbitts in some cases .

  8. 高强度锌铝合金在汽车零件上的应用研究

    Study on the Application of High Strength Zinc-Alloy for Automotive Parts

  9. 铸造锌铝合金的一次结晶和组织特点

    The primary crystallization and structure of zinc - aluminium foundry alloys

  10. 粉末冶金制备硅颗粒增强锌铝合金复合材料的探讨

    Research on Si Particle Reinforced Al Composite Fabricated by Power Metallurgy

  11. 锌铝合金镀层中铝的测定及准确度分析

    Measurement of Al and Its Accuracy Analysis in Zn Al Alloy Plating

  12. 考虑比重偏析的锌铝合金凝固模型

    The Solidification Model of Zn-Al Alloy with the Consideration of Gravitational Segregation

  13. Al-5Ti-B变质高锌铝合金的组织和性能

    Microstructure and Properties of High Zinc Aluminium Alloy Modified by Al-5 Ti-B

  14. 锌铝合金热型连铸的工艺方法

    Technique of producing ZA alloys by heated mold continuous casting

  15. 锌铝合金涂层与有机涂层的耐盐雾腐蚀性能对比研究

    Research of Salt-fog Resistance Comparison Between Zinc-aluminum Alloy Coating and Organic Coating

  16. 氧化铝短纤维/锌铝合金复合材料的耐磨性

    Wear Resistance of Alumina Short Fibre / Zn-Al Alloy Composites

  17. 一种新型涡轮材料&铸造锌铝合金

    A new type of turbine material ── casting Zn-Al Alloy

  18. 二种锌铝合金润滑时摩擦磨损特性的研究

    Study on Frictional Wear Performance of Two Zinc Aluminium Alloys in Lubrication

  19. 喷射氧化物粒子弥散强化锌铝合金的研究

    Dispersion strengthening of Zn - al based alloy by spraying oxide particles

  20. 锌铝合金镀层在人造海水中的腐蚀研究

    Seawater corrosion of a zinc-aluminum alloy coating in immersion

  21. 锌铝合金铸件电镀工艺

    Electro plating process for zinc - aluminum alloy casts

  22. 热型连铸锌铝合金定向凝固线材的组织分析

    Microstructure analysis of ZA alloy rod directionally solidified by heated mold continuous casting

  23. 锌铝合金镀层钢丝在桥梁缆索上应用的探讨

    Inquiry into Application of the Zn-Al Alloy Coat Steel Wires to Bridge Cables

  24. 锌铝合金和铝青铜摩擦磨损特性的研究

    Study on Friction-Wear Performances of Zn-Al Alloy and Albronze

  25. 稀土对锌铝合金晶粒的细化作用

    Effects of the Rare - earth on Refined Zinc - aluminium Alloy Grain

  26. 稀土锌铝合金的发展

    The Development of Zinc - Aluminium Alloy with Rear-earth

  27. 高强度锌铝合金研究

    Study of zinc - aluminium alloy with high intensity

  28. 锌铝合金耐腐蚀性研究

    A Study of the Corrosion Resistance of ZA Alloys

  29. 锌铝合金溶射膜在食盐水溶液中的腐蚀行为及腐蚀速度

    Electrochemical behavior of zinc-aluminium sprayed film and its corrosion rate in salt solution

  30. 粉末冶金锌铝合金的扩散行为

    The diffusion behavior of P / M Zn-Al alloys