玻璃纤维毡

  • 网络Glass Mat;glass fiber mat;glass fibre mat
玻璃纤维毡玻璃纤维毡
  1. 研究了基体树脂的性质及基体配方中炭黑、结晶成核剂、接枝极性基团的功能化聚丙烯(PP)等对玻璃纤维毡增强PP复合材料力学性能的影响。

    The effects of matrix resin and its contained carbon black , nucleator and functionalized polypropylene ( FPP ) on the mechanical properties of glass mat reinforced polypropylene composite were studied in detail .

  2. 真空灌注成型工艺中玻璃纤维毡渗透率的测量

    Permeability Measurement Method of the Glass Mat in VARI Process

  3. 玻璃纤维毡增强聚丙烯材料(GMT)力学性能的研究

    Study of GMT material mechanical properties

  4. 为提高玻璃纤维毡增强热塑性复合材料(简称GMT)的表面质量,将无机填料颗粒与连续玻璃纤维毡组合增强聚丙烯。

    In order to improve the surface quality of GMT products , combinations of some non-organic filling particles and continuous glass - fiber felt result in enhanced PP.

  5. 根据玻璃纤维毡增强热塑性树脂基复合材料(GMT)制备新工艺特点,提出了稀相喷动流化床的操作方式。

    Due to the characteristics of the new process for manufacturing glass mat reinforced thermoplastic ( GMT ) sheets , the way of dilute spout-fluid bed was proposed .

  6. 本文使用挤压流动技术研究了玻璃纤维毡增强聚丙烯片材(GMT)的各向异性流动行为。

    The anisotropic flow behaviour of glass fibre / polypropylene glass mat thermoplastic ( GMT ) has been investigated using axisymmetric squeeze flow testing between parallel circular plates .

  7. 以滑石粉填充聚丙烯为基体,连续无规玻璃纤维毡为增强材料,通过熔融浸渍工艺制备了滑石粉填充玻璃纤维毡增强聚丙烯(GMT-PP)复合材料。

    Glass fiber mat reinforced thermoplastic polypropylene ( GMT-PP ) composite was prepared and effect of adding talc to composite on its mechanical properties was investigated .

  8. 针对S-SBS膜强度较低和干膜较脆的问题,通过复合玻璃纤维毡制备了纤维复合磺化SBS膜。

    Fiber / sulfonated SBS composite membranes were made by way of integrating S-SBS with the glass fiber felts , just in connection with the problems of the brittleness and poor strength of S-SBS membranes .

  9. 为了获得高刚性和高韧性的玻璃纤维毡增强聚丙烯(GMT-PP),首先制备了硅烷接枝聚丙烯(PP-g-Si),研究了PP-g-Si对GMT-PP的增容作用及增容机理。

    For the balance between stiffness and toughness of polypropylene composites which filled by glass fiber mat , the compatibilizing mechanism and effect of silane grafted polypropylene on GMT-PP performed were studied .

  10. 为了获得低成本、高综合性能的玻璃纤维毡增强聚丙烯(GMT-PP)材料,我们采用组合改性技术研究了矿物填料和玻璃纤维毡增强聚丙烯片材性能。

    A combination modification technology may acquire a material with good comprehensive properties . In order to make a PP composite which reinforced by glass fiber mat ( GMT-PP ) with low cost and good comprehensive properties , we investigated PP composite reinforced by combination glass mat and mineral .

  11. 滑石粉增强增韧玻璃纤维毡增强聚丙烯复合材料的研究

    Glass Fiber Mat Reinforced Polypropylene Composite Toughened and Strengthened by Talc

  12. 硅灰石与连续玻璃纤维毡组合增强聚丙烯的力学性能

    Mechanical Properties of Wollastonite / Continuous Glass Mat / Polypropylene Composite

  13. 我国连续玻璃纤维毡的应用与开发

    Application and development of continuous GF mat in our country

  14. 玻璃纤维毡增强聚丙烯在压缩模塑流动过程中的纤维分布

    Fiber Distribution During Compression Molding of Glass Mat Reinforced Polypropylene

  15. GB/T6007-1985玻璃纤维毡片单位面积质量的测定

    Textile glass Glass mats Determination of mass per unit area

  16. 玻璃纤维毡增强热塑性复合片材的研制和应用

    The Development and Application of Glass Mat Reinforced Thermoplastic

  17. GB/T15232-1994纺织玻璃纤维毡拉伸断裂强力的测定

    Textile glass Mats Determination of tensile breaking force

  18. 玻璃纤维毡增强聚丙烯复合材料的湿热稳定性

    Moisture stability of glass fiber mat reinforced polypropylene

  19. 本文介绍了我国连续玻璃纤维毡的应用与开发情况。

    This paper introduces the application and development of continuous GF mat in our country .

  20. 树脂绝缘干式变压器绕组用玻璃纤维毡树脂浸透性能试验研究

    Test and Research on Resin Permeability of Glass Mat used for Resin-Insulated Dry-Type Transformer Windings

  21. 聚丙烯树脂熔融浸渍连续玻璃纤维毡过程的研究

    Study on the Process of the Impregnation of Melting Polypropylene in Continuous Glass Fiber Mats

  22. 连续玻璃纤维毡增强聚丙烯的研究

    Continuous Glass Fiber Mat Reinforced Polypropylene

  23. GB/T8236-1987纺织玻璃纤维毡片平均厚度、加载厚度和加载后复厚度的测定

    " Textile glass Mats Determination of average thickness , thickness under load and recovery after compression "

  24. 高溶解度粘合剂玻璃纤维毡

    High solubility binder glass mat

  25. 结果表明,在一定温度区间内的冷热循环会对玻璃纤维毡增强聚丙烯的界面造成损伤,使材料的力学性能下降;

    The results show that thermal cold cycle leads to the interfacial failure and reduction in mechanical properties .

  26. 真空渗流法制备微孔复合泡沫铝的工艺研究真空灌注成型工艺中玻璃纤维毡渗透率的测量

    Factors Influencing Preparing Micro-pore Composite Foam Aluminum by Vacuum Infiltration Method Permeability Measurement Method of the Glass Mat in VARI Process

  27. 简单介绍玻璃纤维毡增强聚丙烯片材的研制、性能和应用。

    In this paper , the application , properties and study of glass fiber mat reinforced polypropylene sheet ( GMT ) are presented briefly .

  28. 对树脂绝缘变压器绕组用玻璃纤维毡的树脂浸透性能进行了试验研究,介绍了试验设备、试验过程及其结果。

    The resin permeability of glass mat used for resin-insulated transformer windings is tested and researched . And the test equipments , test proceedings and its results are also presented here .

  29. 采用硅灰石与连续玻璃纤维毡组合增强聚丙烯,研究了硅灰石的含量、玻璃纤维毡的面密度、基体树脂的性质及界面改性等对材料力学性能的影响。

    Mechanical properties of wollastonite / continuous glass mat / polypropylene composites and their influential factors such as the content of wollastonite , surface weight of glass mat , property of matrix resin and methods of interfacial modification have been investigated .

  30. 以双酚A型不饱和聚酯、胶衣树脂为基体树脂,玻璃纤维表面毡、玻璃布、短玻璃纤维毡为增强材料,制备了玻璃纤维增强塑料(GFRP)填料塔。

    The glass fiber reinforced plastics have been prepared with bisphenol A unsaturated polyester and gel coating resin as the matrix resins , glass fiber mat and glass cloth as the reinforcing materials .