压胶

纯机械压胶&接缝带看起来干练并且做工很好。

Fully factory seam taped-seam taping looks neat and well done .

陕北石油秩序橡胶油封压胶模唇口结构的选择

Selection of Lip Structure of Mould for Rubber Oil Seal

从O形圈压胶模的设计加工看成组技术

Group Technology Viewed from the designing and manufacturing of O-ring extrusion dies

生产产品过硬，经久耐用，压胶性能好。

Production products is excellent , durable , pressure glue good performance .

新型压胶塞液研究与应用

Study and application of a new flushing fluid

新型压胶塞液中含大量强缓凝的HMP-Ⅲ，能避免清洗出的水泥浆稠化；

With plenty of strong retarder HMP - ⅲ in the flushing fluid , the cement slurry flushed out remain water y.

主要生产羽绒服、防寒服、棉服、休闲服、夹克、工装服、工装裤子、压胶服等等。

Main production down jacket , winter clothes , cotton-padded clothes , casual wear , jackets , Tooling suits , overalls son , adhesive clothing and so on .

改性预压UF胶的研制

Modified pre - pressure UF glue

泵压（胶）塞。

Pump down the plug .

试验表明，随着低成本API加入量的增加，胶合板的预压性能、胶接强度都有明显提高。

Experiment results showed that pre-press capability and bonding strength of plywood can be improved distinctly with increasing added quantity of low cost API .

为保证高炉炉底的密封性，需在炉底板下的缝隙压入炭胶，使之成为密实的整体。

The carbon glue should be pressed into the gap below the furnace bottom plate in order to make the furnace become a concentrated entirety , and then ensure the seal property of the BF bottom .

DN-4号冷压脲醛树脂胶的研制

Research on the lower-poisonous dn-4 urea-formaldehyde resin for cold hardening

应用FLUENT软件，经过简化及边界处理，分别研究了Φ90普通挤出机和销钉机筒挤出机在不同转速、不同销钉布置、不同反向压差条件下胶料的流动行为。

After structures were simplified and boundary conditions were disposed for the ordinary extruder with a diameter of 90 mm and the pin barrel extruder , flow behaviors of rubber materiel were studied applying FLUENT in the conditions of different rotational speed and pin layout and reverse pressure difference .

通常，极压添加剂的抗胶合作用依赖于金属表面形成的反应膜。

It is revealed that the effect of EP additives used to resist scuffing mainly depends on the reaction film formed on metal surface .

系采用气压保气和械压保气、胶堵保气的综合方案。

The tyre leakage resistant valve adopts integrated schemes that air is preserved by air pressure , by mechanical pressure and by adhesive blockage .

全自动控制混炼过程中，混炼过程参数，如转子转速、填充因数、压砣压力和胶料温度对混炼胶质量有影响；

During the auto-control mixing , the parameters of the mixing process , such as rotor speed , filling factor , ram pressure and mix temperature have effect on the mix quality ;