钛合金

该公司生产钛合金。

The company produces titanium alloy .

富Nd第二相颗粒对钛合金拉伸断裂方式的影响

Effect of Nd-rich second phase particles on fracture behaviors of a near - α titanium alloy

共析元素Fe在亚稳定β钛合金中的行为

Effect of Fe-Eutectic Element on Property of Metastable β - Titanium Alloys

胸腰椎后路钛合金脊柱内固定系统对术后MRI成像的影响

Influence of posterior thoracic and lumbar titanium internal fixation system on magnetic resonance image

目的：探讨CT引导下经皮空心钛合金拉力螺钉内固定治疗骶髂关节损伤的临床疗效。

Objective : To explore the clinical results of the percutaneous internal fixation of sacroiliac joint trauma by CT guided technique .

T.三种钛合金的高温渗氧行为

Oxygen Permeation Behaviors of Three Titanium Alloys at High Temperature

TiC颗粒增强非晶钛合金基复合材料的热稳定性

Thermal stability of TiC Particulate Reinforced amorphous Ti alloy-based composite

本文用TEM等方法对新研制的近α型结构钛合金Ti&5123合金的界面相进行研究。

The interface phase in a newly developed near a titanium alloy Ti-5123 was investigated by TEM .

ICP-AES法测定钛合金中次要成分和杂质元素

Determination of Al , Zr and Impurity Element in Titanium Ally by ICP-AES

CBN开槽砂轮缓进深切磨削钛合金的实验研究

Creep Feed Deep Grinding Titanium Alloy with Slotted CBN grinding wheel

镶块式CBN砂轮缓进给磨削钛合金

Creep Feed Grinding of Titanium Alloy with Intermittent CBN wheel

钛合金的脉冲TIG焊工艺

Titanic Alloy Pulsed TIG Welding Technology

应用TIG焊接钛合金时，气体保护问题常常是决定焊接质量的关键。

In TIG welding of titanium alloys , the welding quality usually depends on the gas shielding .

对钛合金中的TiC，用重力法和定向凝固法制备试样，分析研究了其中TiC形态及生长方向。

Morphology and growing direction of TiC in titanium alloy has been investigated by gravity and directional solidification technique .

深入系统地研究FF影响因素对钛合金FF行为作用规律，探讨FF机理。

The mechanism of FF is discussed by studying the effects of major testing factors .

对氧化膜截面的SEM图进行分析，讨论了Ce元素对钛合金阳极氧化膜厚度的影响。

The influence of Ce element on the thickness of the film was presented by analyzing SEM micrography of the transverse section of the oxide film .

对影响高弹高强钛合金（TiAlMoVFeB）弹性模量的因素进行了研究。

Factors which affect elastic modulus of a new type titanium alloy with high strength and high elastic modulus ( Ti Al Mo V Fe B ) were studied .

钛合金热稳定性研究Ⅱ.过渡族元素在Ti3X相形成中的行为

ON THE THERMAL STABILITY OF Ti ALLOYS ⅱ . The Behaviour of Transition Elements in Ti_3X-Phase Formation

两种钛合金的腐蚀动力学规律均服从Wagner理论中的近抛物线规律。

The corrosion dynamics pattern of these two alloys all submits Para-curve in Wagner theory .

以石墨为电极，采用电火花沉积的方法，在TC1钛合金表面制备了TiC涂层。

TiC coating on TCI titanium alloy is deposited by electrospark process using the graphite electrode .

WC粉末爆炸喷涂BT-20钛合金的涂层性能研究

Properties Research on WC Coating on BT-20 by Detonation Gun Spraying

目的讨论分析BARTON骨折T形钛合金钢板内固定的手术疗效。

Objective To evaluate the results of Barton fracture of the distal radius with T plate internal fixation .

利用谐分析法所计算的全极图，结合X射线衍射所测不全极图数据，用极图法计算了轧制钛合金板材的相比例。

Phase proportion in textured sheet of titanium alloy was calculated using the data of in complete pole figures that were measured by Xray diffraction and the complete pole figures that were calculated by means of harmonic analysis .

利用多弧离子镀膜技术在口腔修复材料&钛合金（Ti6Al4V）表面制备TiN薄膜。分析表面镀膜组织结构，探讨钛合金基材及表面镀层的抗细菌粘附性能。

TiN coating was formed on titanium alloy ( Ti6Al4V ) surface by employing multi-arc ion plating , which is used as dental prosthetic material .

目的评价开放复位钛合金钢板内固定治疗SandersⅢ、Ⅳ型跟骨骨折疗效。

Objective To evaluate the effect of open reduction internal fixation with titanium plate for treatment of calcaneal fractures typed of Sanders .

TC11钛合金高温塑性本构方程研究

Research on constitutive equations for hot working of metals

钛合金热稳定性研究Ⅰ.Ti3X相形成的电子浓度规律

ON THE THERMAL STABILITY OF Ti ALLOYS I. The Electron Concentration Rule for Formation of Ti_3X-Phase

Ti-1023钛合金切削的实验研究

An Experimental Study of Ti-1023 Alloy Cutting

颈椎间盘突出症者采用前路钢板固定2例，CBK颈椎Cage固定12例，螺纹状钛合金Cage固定2例。

At cervical disc herniation patient group , titanium Cage was used in 2 cases , CBK in 12 cases , plate in 2 cases .

关于TC6钛合金β转变组织的研究

The Microstructure of Transformed β in Titanium Alloy TC 6