连铸连轧
- 网络Continuous casting and rolling;csp;Conroll;cc-dr;CCDR;scr
-
210t转炉是包钢薄板坯连铸连轧厂的主要设备,而炉壳是其重要部件,焊接工艺直接影响薄板的正常生产。
T converter is a major piece of the equipment of CSP and the shell is the important part of it , its reasonable welding is a key for a normal producting of CSP . 210 to .
-
薄板坯连铸连轧流程低碳Al镇静钢组织细化原因探讨
Study on Structure Refinement of Low Carbon Al-killed Strip Produced by TSCR
-
薄板坯连铸连轧Ti微合金化钢的物理冶金学特征
Physical metallurgy for the titanium microalloyed strip produced by thin slab casting and rolling process
-
组织超细化是导致薄板坯连铸连轧流程V微合金钢强度提高的主要原因。
The main reason for strength increase of V microalloyed steel is ultra-fine microstructure in TSCR process .
-
ASP中薄板坯连铸连轧工艺及产品性能特点分析
Analysis on Technology of ASP Medium-thin Slab Continuous Casting and Rolling and Product Characteristic thereof
-
薄板坯连铸连轧含Nb钢变形抗力模型研究
Research of Deformation Resistance Modeling for Nb Bearing Steel During Compact Strip Process
-
本文就薄板坏连铸连轧生产热轧TRIP钢的可行性进行了分析和讨论。
In the present article , the feasibility of the production of hot rolled TRIP steels using TSCR process was analyzed .
-
基于SVM算法的薄板坯连铸连轧系统的数学模型研究
The Math Model Research on the Continuous Casting and Rolling System of Sheet Metal Based on SVM Algorithm
-
SCR连铸连轧生产铜银合金导线材料&产业化配置铜银合金生产实践
Manufacture of Cu - Ag Alloy Conductive Wires with SCR Continuous Casting - Rolling
-
珠钢连铸连轧CSP生产线建设与投产
Construction and commissioning of CSP line at Zhujiang Steel
-
文章介绍了用于邯钢薄板坯连铸连轧项目的SIEMENS全数字交交变频系统的同步机矢量控制。
SM vector control of SIEMENS digital cycloconverter system implemented in Handan CSP is presented .
-
薄板坯连铸连轧工艺Ti微合金化高强钢屈服强度影响因素回归分析
Regression Analysis of Influence Factors to Yield Strength for Ti Micro-Alloying High Strength Steel in Thin Slab Casting and Rolling Process
-
本文介绍了马钢CSP目前生产的产品品种并根据薄板坯连铸连轧技术的发展方向及国内外其它CSP生产线的产品状况,探讨了马钢CSP产品品种今后的发展趋势。
The product varieties and developments of MA Steel and other CSP lines of thin slab continuous casting were discussed .
-
薄板坯连铸连轧C-Si-MnTRIP钢组织和力学性能的研究
Study on Structure and Mechanical Properties of C-Si-Mn TRIP Steel Produced by Thin Slab Casting and Rolling Process
-
薄板坯连铸连轧Nb-Mo微合金TRIP钢的研究
Research on TRIP steel with Nb and Mo by thin slab casting and rolling process
-
目前薄板坯连铸连轧CSP(CompactStripProduction)工艺所开发的钢种有:(1)ECC、UCC和IF软钢;
At present the steel grades being developed by CSP ( compact strip production ) process are ( 1 ) ECC , UCC and IF soft steel ;
-
介绍了薄板坯连铸连轧和中厚板坯炉卷轧制工艺开发的HSLA钢品种的工艺特点和工艺优化。
The characteristic and optimization of both processes for developing HSLA steel grade are presented .
-
铸坯截面积大小对SCR连铸连轧电工用铜线坯质量的影响废杂铜冶炼技术在铜线坯生产中的应用
The Effect of Cross Section Area of Casting Bar on the Quality of Copper Rod for Electrical Application of SCR Continuous Casting & Rolling
-
达涅利无头连铸连轧(ECR)工艺是小型钢厂生产特殊钢和普通钢种长材产品的一项创新技术。
The ECR endless casting rolling process is the latest innovation in minimills for speciality steel and commercial steel long products .
-
本文基于薄板坯连铸连轧流程物理冶金特征,系统地研究了V的析出规律和V微合金钢的强化机理。
Based on the physical metallurgy characteristics of thin slab casting and rolling ( TSCR ) process , the article systematically researches the precipitating regulation of V elment and strengthening mechanism of V microalloyed steel .
-
薄板坯连铸连轧(CSP)轧制区组织模拟我国薄板坯连铸连轧工艺的生产现状
Microstructure Simulation of Thin Slab Continuous Casting and Continuous Rolling ( CSP ) Process ; THE PRODUCING STATUS OF THIN SLAB CONTINUOUS CASTING AND ROLLING IN CHINA
-
本文针对邯钢集团公司连铸连轧厂CSP(CompactStripPlant)生产线,系统地介绍了生产线的设备及工艺流程。
Concerning to the CSP ( Compact Strip Plant ) production line in Handan Iron and Steel Group Company Limited , the authors give a systematic introduction on the equipment and process of the production line .
-
150t转炉-150tLF炉-薄板坯连铸连轧流程钢液增氮的试验研究
Experimental Tests on Nitrogen Increasing During the Process from 150t Converter and 150t LF to Thin Slab CC
-
薄板坯连铸连轧取向硅钢流程中Cu2S抑制剂的析出行为钼酸盐封闭后处理的热镀锌钢板硅烷膜的耐蚀性
Precipitation of Inhibitor ( Cu_2S ) in Experimental Grain Oriented Silicon Steel Made by Thin Slab Casting and Rolling Process Corrosion Resistance of Silane Films on Hot-Dip Galvanized Steel by Molybdate Post-Sealing
-
与传统连铸连轧工艺生产的同类钢相比,CSP工艺低碳钢中微量钛的加入明显增加了细小析出相的数量。
Compared with the conventional cold charge process , small addition of Ti would be more effective for precipitation of fine precipitates in the steels produced by CSP process .
-
并结合薄板坯连铸连轧的工艺特点,分析了Ti微合金化技术在TSCR工艺中的应用前景。
In addition , it , relating the continuous casting and rolling feature of the slab , analyses the application prospect of Ti micro-alloying technology in TSCR .
-
薄板坯连铸连轧CSP工艺缓冲性能的研究&直通式辊底炉传热模型及其数值分析
A Study of the Cushioning Performance of CSP Technology for the Continuous Casting and Rolling of Thin Slab : Thermal Transfer Model of Straight Through Type Roller Hearth Furnace and Its Numerical Analysis
-
分析了薄板坯连铸连轧工艺生产电工钢的现状,与传统的厚板流程相比,分析了CSP工艺生产电工钢的优势。
This article analyzes the present situation of electrical steel manufacture by thin-slab casting process and describes the advantages of CSP process for manufacturing electrical steel compared with the traditional slab casting process .
-
浅谈连铸连轧生产线FODCS控制系统的组成及运用
On Formation and Application of Controlling System FODCS in Continuous Casting and Rolling Production Line
-
通过对薄板坯连铸连轧发展历史、技术特点的介绍,叙述了鞍钢中薄板坯连铸连轧技术(ASP)的创新与发展。
The paper introduces the history of thin slab continuous casting and rolling , the innovation and explore of Angang continuous casting and rolling for medium-thin slab ( ASP ) and the improvement and application of ASP unique technique .