薄板

báo bǎn
  • sheet;sheet metal;steel sheet;lamina;lamel
薄板薄板
薄板 [báo bǎn]
  • [sheet;sheet metal;steel sheet] 金属或其他材料延伸的宽而薄的板

薄板[báo bǎn]
  1. 多工位薄板装配偏差流传递的状态空间模型

    State space model of variations stream propagation in multistation assembly processes of sheet metal

  2. 针对多工位薄板装配过程,建立了一种新的公差综合方法。

    An optimal sensor design method was presented for the multistation sheet metal assembly processes .

  3. 机器在金属薄板上冲出一排孔。

    The machine punches a row of holes in the metal sheet .

  4. 木料被锯成大块的薄板。

    The wood was cut into large sheets of veneer

  5. 电锯轻而易举地就把原木锯成薄板了。

    The power saw sliced the logs like a knife through butter .

  6. 非均质地基弹性薄板分析的Green函数法

    Analysis of thin elastic plate on heterogeneous foundation by green 's function method

  7. 薄板超塑胀形材料参数m、K值的测定

    Determination of Material Parameters M and K in Superplastic Bulging of Sheet

  8. 通过薄板层析、红外、GC/MS分析,得知这种物质为脂肽类物质。气相色谱法测定邻茴香醛

    GC / MS . GC Analysis of O - Anisaldehyde

  9. 薄板叠层粘接模具制造技术中的CAD研究

    Study on CAD Approach in Die 's Manufacturing by Sheet Metal Layer for Layer through Gluing

  10. 随机载荷下碳纤维薄板增强RC梁试验研究

    Research on RC Beams Strengthened with Carbon Fiber Laminate under Random Load

  11. 循环载荷下纤维薄板增强RC梁的疲劳性能研究

    A Study on the fatigue behavior of RC beams strengthened with fiber laminates

  12. 碳纤维薄板增强RC梁的抗弯疲劳寿命

    Fatigue Lives of RC Beams Strengthened with Carbon Fiber Laminate on Bending Loads

  13. 薄板Al合金的TIG焊接头性能研究

    Researches on Welded Joints of Aluminum Alloy Sheets by Tungsten Inert Gas Welding Process

  14. 通过薄板层析、红外、GC/MS分析,得知这种物质为脂肽类物质。方法:采用高效液相色谱法和气质联用法进行测定。

    Method To conduct the test in the study by HPLC and combined GC - MS .

  15. 基于薄板翻边回弹试验的RBF神经网络模型

    Modelling of Springback with RBF Neural Network Based on Experiments in Flanging Operation

  16. 薄板中类Lamb波在负载流体中引起的声流的研究

    Acoustic streaming induced by ultrasonic quasi-Lamb waves in a plate

  17. TA2薄板的双向拉伸试验研究

    Experimental study on biaxial tension of ta_2 thin sheets

  18. 钽薄板TIG氦弧点焊熔池的动态测定与分析

    Analysis and dynamic measure of tungsten inert gas spot welding pool for tantalum sheet

  19. UHMWPE彩色多孔薄板的加工技术

    Processing Technology of UHMWPE Colorful and Porous Thin Plate

  20. 带张力轧制H型件边端的力能参数的实验研究及理论计算薄板带张力轧制时金属流动的计算机模拟

    An Experimental Research and Theoretical Calculation on the Load and Torque in Edging Stocks of H-Beam under Tension SIMULATION OF FLOW PATTERNS IN SHEET ROLLING WITH TENSIONS

  21. CSP生产的热轧薄板边裂的影响因素与控制

    Effect and control on edge cracks of hot - rolled light gauge strips in CSP line

  22. CW激光对铝合金薄板的热应力破坏的模拟计算

    Calculation for the thermal stress damage in the thin plate of Al irradiated by CW laser beam

  23. 有单面粘弹负载层时各向同性薄板中的SH波传播

    The propagation of SH plate wave in an isotropic plate coated with one thin viscoelastic loading

  24. 薄板小变形MAG焊焊接工艺研究

    Research on MAG welding technology of welding little deformation on thin plate

  25. 离散Kirchhoff三角形薄板单元的改进

    Improvement of Discrete Kirchhoff Triangular Thin Plate Bending Element

  26. 在研究中,应用ANSYS有限元分析软件对薄板结构焊接温度场、应力和变形的演化过程、屈曲变形进行数值分析。

    The welding temperature field , stress , distortion evolvement processes and buckling distortion of thin-wall plate were analyzed by using ANSYS FEA software .

  27. 经过比较,我们选取薄板样条的方法(Thin-plateSplines,TPS)来对图像和图谱进行非线性配准。

    We used Thin-plate Splines ( TPS ) in the nonlinear registration of images and atlas .

  28. 本文首先总结了金属薄板直壁件的路径规划方法,即数控程序直接生成G代码的路径规划和UG直接造型的路径规划工艺,比较了两种方法的优缺点。

    According to the character of CNC forming , route planning method is most important for straight-wall parts ' forming . Two got route planning methods are compared .

  29. 本文以Kirchhoff的薄板理论,解狭长矩形截面杆的约束扭转。

    Kirchhoff 's thin plate theory is used to solve the restricted torsion of narrow rectangular cross section .

  30. 介绍PLC控制系统在欠氧燃烧状态下冷轧镀锌薄板加热炉的双交叉限幅控制方式中应用,给出了控制框图、交叉限幅计算公式及实际使用效果。

    This article describes , application of PLC control system in double crossing limit range control mode of cold mill galvanization sheet metal heating furnace in burning status of lack of oxygen .