线性低密度聚乙烯

  • 网络linear low density polyethylene;LLDPE;ldpe
线性低密度聚乙烯线性低密度聚乙烯
  1. 利用苯并氮杂卓镍催化剂和茂金属催化剂的复配,实现了对乙烯的原位聚合改性,制备了线性低密度聚乙烯(LLDPE)。

    In the second part , combination of metallocene metal catalyst and late transition metal complexes were used to in situ polymerize ethylene to prepare LLDPE using MAO as co-catalyst .

  2. 线性低密度聚乙烯装置扩能改造现状分析及方案

    Present Situation Analysis and Schemes for Capacity Expansion of LLDPE Plants

  3. 采用DSC方法研究了纳米二氧化硅(SiO2)填充线性低密度聚乙烯(LLDPE)的熔融特性。

    The melt property of LLDPE filled with nano-scale SiO 2 was studied .

  4. 研究了轮胎胶粉/线性低密度聚乙烯(LLDPE)共混材料的性能。

    Property of blend of tyre rubber powder / LLDPE was studied .

  5. 冲压设计在LLDPE洞(线性低密度聚乙烯)薄膜。

    Designed for punching holes in LLDPE ( Linear Low Density Polyethylene ) film .

  6. 线性低密度聚乙烯(LLDPE)在振动剪切复合应力场中挤出成型时的流变行为研究

    An Investigation of Rheology Behavior of LLDPE under Vibration and Shear Complex Stress Field in Extrusion Molding

  7. 本文研究了基体接枝甲基丙烯酸(MAA)对氢氧化铝(Al(OH)3)填充线性低密度聚乙烯(LLDPE)电气性能的改善。

    Improvement of the electrical properties of LLDPE compound highly loaded with aluminium hydroxide by grafting methacrylic acid to the matrix is investigated .

  8. 介绍粒状线性低密度聚乙烯(以下简称LLDPE)在国产单螺杆挤出机加工试验和相应的工艺技术。

    The paper introduces the processing test and technique of particle LLDPE on single-screw extruder made in China .

  9. 据市场消息称,唯一走弱的PE产品是C4线性低密度聚乙烯(LLDPE)。

    The only PE grade that many market sources considered to be weak was C4 linear low density PE ( LLDPE ) .

  10. 纽曼帝克集团的执行机构气缸孔打孔机非常适合在LLDPE冲压洞(线性低密度聚乙烯)薄膜。

    The Numatics Actuator Group Hole Punch Cylinder is perfect for punching holes in LLDPE ( Linear Density Polyethylene ) film .

  11. 本文研究了电子束辐照剂量对线性低密度聚乙烯(LLDPE)、乙烯-醋酸乙烯酯共聚物(EVA)及其共混物凝胶含量和力学性能的影响。

    The effect of electron beam irradiation dose on the gel content and mechanical property of LLDPE , EVA and their blends has been studied .

  12. 采用玻璃微珠(GB)改性聚丙烯(PP)和线性低密度聚乙烯(LLDPE),对玻璃微珠的用量、粒径和复合材料加工方法对材料的力学性能的影响进行了比较研究。

    The effects of glass bead ( GB ) content , diameter and processing route on the mechanical properties of glass bead filled PP and LLDPE were comparatively studied .

  13. 利用振动剪切挤出装置研究了线性低密度聚乙烯(LLDPE)在振动与旋转剪切复合力场中挤出成型时的流变行为。

    The new extrusion equipment has been designed to research the rheological behavior of LLDPE extrusion moulding in complex stress filed of vibration and shearing .

  14. 采用高乙烯基含量硅橡胶(PDMS)与线性低密度聚乙烯(LLDPE)进行熔融共混,并添加阻燃母料,制得LLDPE/PDMS阻燃共混物;

    Flame-retardant LLDPE / PDMS blends were prepared by melt blending of LLDPE , silicone rubber PDMS containing high content of vinyl group and flame-retarding master-batch .

  15. 应用毛细管流变仪,考察了线性低密度聚乙烯(LLDPE)熔体于短口型挤出中的胀大现象及其影响因素。

    The extrudate swell behaviour and the factors affecting it during short die extrusion of linear low density polyethylene ( LLDPE ) melt have been investigated by using a rheometer .

  16. 简要分析了国内线性低密度聚乙烯装置的生产能力、产品牌号、市场需求和产品结构,对齐鲁LLDPE装置改造后产品的结构调整及开发方向提出了建议。

    This paper analyzed briefly the capacity , product brands , market demand and products structure of LLDPE in our country , suggested product structure adjustment and developing trend of Qilu LLDPE plant after technical revamp .

  17. 研究了在二甲苯溶剂中,以过氧化二苯甲酰(BPO)为引发剂,线性低密度聚乙烯(LLDPE)接枝马来酸酐的反应。

    The reaction of maleic anhydride ( MAH ) grafted onto linear low density polyethylene ( LLDPE ) in xylene solvent in the presence of benzoyl peroxide ( BPO ) as initiator has been investigated .

  18. 本文选用茂金属线性低密度聚乙烯(m-LLDPE)作为研究对象,向其中分别加入不同含量的三种光敏化剂,系统地研究了m-LLDPE薄膜的光降解特性。

    We put three kinds of photosensitizer into metallocene-linear low density polyethene ( m-LLDPE ), Then photo degradable behavior of m-LLDPE had been researched systematically .

  19. 中国石油抚顺石化公司在8万t/a线性低密度聚乙烯(LLDPE)装置上,采用加拿大DuPont溶液法聚合工艺,在注塑料PE2911的基础上,开发出了流动性更好的工业产品PE2912。

    High fluidity polyethylene ( PE ) 2912 was developed on the basis of injection grade PE 2911 by Canada DuPont solution polymerization process in the 80 kt / a linear density polyethylene ( LLDPE ) unit .

  20. 采用溶液插层和熔融插层法制备了聚碳酸丙烯酯(PPC)/Mg3AlLDH、线性低密度聚乙烯(LLDPE)/Mg3AlLDH和Nylon6/Mg3AlLDH剥离纳米复合材料。

    The polymer / LDH nanocomposites were synthesized by solution intercalation and melt intercalation methods . Poly ( propylene carbonate ) / Mg_3Al LDH , linear low density polyethylene ( LLDPE ) / Mg_3Al LDH and Nylon 6 / Mg_3Al LDH exfoliated nanocomposites were prepared .

  21. 研究了马来酸酐接枝线性低密度聚乙烯(LLDPE-g-MAH)增容剂对尼龙66/超高分子量聚乙烯(PA66/UHMWPE)复合材料力学性能和形态结构的影响。

    The effects of LLDPE-g-MAH compatilizer on the mechanical property and morphological structure of nylon 66 / ultrahigh molecular weight polyethylene ( PA66 / UHMWPE ) composite were investigated .

  22. 线性低密度聚乙烯&炭黑复合物的正温度效应

    The PTC Effect of Carbon Black Filled Linear Low Density Polyethylene

  23. 新型高性能线性低密度聚乙烯电缆料

    Linear Low Density Polyethylene-A New Type Cable Compounds with High Performance

  24. 含氟改性剂在线性低密度聚乙烯树脂加工中的应用

    Application of Fluorine-Bearing Modifier in Linear Low Density Polyethylene Resin Processing

  25. 纳米二氧化硅填充线性低密度聚乙烯的等温结晶动力学

    Kinetics of isothermal crystallization for LLDPE filled with nano-SiO_2 Linear Prediction

  26. 线性低密度聚乙烯在与丁苯橡胶的共混体系中的结晶行为

    Crystalline structure and crystallization behavior of LLDPE in lldpe / SBR blends

  27. 线性低密度聚乙烯马来酸酐溶液接枝反应的研究

    Study on Solution Grafting of Maleic Anhydride onto Linear Low Density Polyethylene

  28. 线性低密度聚乙烯挤出工艺中的几个问题

    Problems to be solved in the extrusion process of LLDPE

  29. 高密度聚乙烯和线性低密度聚乙烯共混用于包装薄膜的生产

    Manufacture of Wrapping Film from HDPE and LLDPE Polymer Blends Linear Prediction

  30. 线性低密度聚乙烯对于增大共混体系的冲击强度有明显的作用。

    LLDPE was good for improving the impact strength of the system .