硼化物陶瓷

SHS法制备硼化物陶瓷粉体的表征分析

Characterization of Boride Ceramic Powders Prepared by SHS

稀土元素在氧、碳、硼化物陶瓷材料中的应用研究

Applications of Rare-Earth Elements in Oxide , Carbide and Boride Ceramic Materials

ZrO2增韧Al2O3－硼化物陶瓷性能研究

Study on ZrO_2 Toughness and Boride Ceramics

硼化物陶瓷复合粉末的表征分析

Characterization Analysis of Boride Complex Ceramic powders

硼化物陶瓷复合材料的研究进展与前景展望

Boride Ceramic Composite Materials Research and Prospects

硼化物陶瓷粉末的合成与分析

Synthesis and analysis of boride ceramic powders

硼化物陶瓷及其应用

Boride ceramics and Application

三元硼化物陶瓷涂层的硬度高，耐磨性好，是良好的钢基体耐磨涂层。

Ternary boride ceramic coating is the superior steel basic wear-resistance coating , because of its high hardness and good wear resistance .

硼化物陶瓷除具有一般高性能结构陶瓷材料的特点外，还具有一些比较特殊的性能，因而引起国内外材料研究者和使用者的注目。

The material researchers and users have payed more and more attention to the special properties of boride ceramics in addition to its ordinary properties as the advanced ceramies .

根据三元硼化物金属陶瓷硬质覆层材料6B的制备工艺，研究了该硬质覆层材料界面过渡层的形成机理。

Basing on the fabrication technology of ternary boride cermets cladding material ( 6B ) , its interface formation mechanism is studied .

利用Ti-Al、Ni-Al、Fe-Al和Nb-Al系的多种铝化物和MoSi2等硅化物作为氧化物、碳化物、氮化物和硼化物等陶瓷的粘结相，国内外的研究学者进行了卓有成效的工作。

Many works have been carried out in using Ti-Al , Ni-Al , Fe-Al and Nb-Al , Nb-Al and MoSi_2 as binding phase in cermets , where the hard phases include oxide , carbide , nitride , boride ceramics by researchers worldwide .

三元硼化物金属陶瓷覆层材料耐腐蚀性能研究

Study on Corrosion Resistance of Ternary Boride Cermet Clad Materials

研究了三元硼化物金属陶瓷-钢覆层材料在5%H2SO4和在20%NaOH溶液中的耐腐蚀性能。

Corrosion resistance of ternary boride cermet-steel cladding materials in 5 % H_ ( 2 ) SO_ ( 4 ) and 20 % NaOH solution have been studied .

用液相烧结工艺在1270℃-1290℃下真空烧结成功制备出A3钢用三元硼化物基金属陶瓷覆层材料。

A3 steel used ternary boride laminated material has been fabricated successfully at the temperature of 1270 ℃ - 1290 ℃ in vacuum using liquid sintering technique .

三元硼化物基金属陶瓷复合材料及其液相烧结机理

Ternary Boride Base Cermets Composite and Its Liquid - phose Sintering Mechanism

三元硼化物基金属陶瓷覆层材料的制备及磨损性能研究

Manufacturing and Study on the wear performance of ternary boride laminated material

三元硼化物基金属陶瓷的液相烧结及其应用

Liquid Sintering and Application of Ternary-Boride Based Cermet

真空粉末烧结三元硼化物基金属陶瓷覆层的组织与性能

Microstructure and Properties of Ternary Boride Based Metal Cermets Coating Prepared by Vacuum Powder Sintering

指出三元硼化物基金属陶瓷具有良好的机械性能和杰出的耐磨、耐蚀等性能；

The ternary boride base cermets have exhibited good mechanical properties and excellent wear and corrosion resistance .

介绍了用反应烧结法制备三元硼化物基金属陶瓷的反应烧结过程及一般制备工艺过程；

The reaction sintering process and production process of ternary boride base cermet produced by reaction sintering method were introduced .

在真空烧结炉中通过原位反应液相烧结工艺制备出三元硼化物基金属陶瓷覆层。

Ternary boride based cermet cladding material was prepared by in situ reaction and liquid phase sintering technology in vacuum furnace .

简单介绍了多元硼化物基金属陶瓷的发展历程。对其制备工艺、各种性质以及应用作了比较详细的论述。

The history of development , manufacturing process , structure , properties and application of the multiple boride base cermet are reviewed .

由于三元硼化物基金属陶瓷的性能与合金元素的含量有密切的关系，所以在进行三元硼化物基陶瓷的设计过程中要特别注意合金元素的作用。

As there 's close relation between the properties and the content of alloying elements , effects of alloying elements must be paid attention to during the designing process of ternary boride base cermet .

同时对三元硼化物基金属陶瓷的耐磨性、耐腐蚀性、相关的物理性能和力学性能作了测试、分析和探讨。

The properties such as high hardness , excellent properties of abrasive resistance , corrosive resistance , physical and mechanical of ternary boride cermets are introduced briefly ( also tested , analysed and discussed ) here .