盾构机

  • 网络Shield;shield machine;tbm;tunnel boring machine
盾构机盾构机
  1. 地铁工程盾构机(TBM)测量定向的研究

    Study of Directional Surveying for TBM Excavation in Subway Construction

  2. 超大直径泥水平衡式盾构机始发技术

    Launching Technology of Super-diameter Slurry-pressure-balance TBM

  3. SimaticManager在盾构机故障排除中的应用

    Application of SIMATIC Manager in shield machine trouble shooting

  4. 其中利用CATIA软件中的MachineDesign机械设计模块创建EPBΦ6.28m土压平衡式盾构机的刀盘模型。

    Use the mechanical design module Machine Design of CATIA to create EPB Φ 6.28 of earth pressure balance knife-shield machine model .

  5. EPB盾构机在富水砂层中的适应性分析

    Adaptive Analysis for EPB Shield Machine in Watered Sandy Stratum

  6. EPB盾构机土仓压力分布有限元数值模拟

    Numerical simulation of earth pressure distribution in chamber of EPB shield by finite element method

  7. 继而,本文提出采用BP神经网络、通过调节螺旋输送机转速实现对盾构机密封舱多点土压平衡控制的最优控制策略。

    Second , this paper came up with an optimal control strategy based on BP neural network to achieve the shield capsule multiple-point earth pressure balance control by adjusting the screw conveyor speed .

  8. 通过对地铁工程建设施工的固有危险性以及以往事故的统计分析,确立坍塌是地铁工程施工中的重大突发事故;运用实效模式与影响方法,研讨TBM盾构机施工过程中的各种可能危险及后果;

    Collapse accident as a severe abrupt accident is defined by analyzing statistically past accidents and the inherent risk during metro construction .

  9. 300t盾构机整体吊装技术

    The Integral Lifting Technology of a 300-ton Shield Machine

  10. 基于子模型方法与任意拉格朗日-欧拉有限元方法(ALE),建立了盾构机刀盘掘削过程的三维数值模型。

    A3D finite element model for cutterhead-soil interaction in shield tunneling was established by combination using of submodeling and arbitrary Lagrangian-Eulerian ( ALE ) method .

  11. 研究了前处理建模软件GAMBIT的JOURNAL命令,提出参数化建模的方法,并建立了土压平衡式盾构机刀盘的参数化模型。

    Study the JOURNAL language of the modeling software GAMBIT . Bring forward the method of parameterized modeling . The parameterized modeling of the cutterhead for EPB was established . 6 .

  12. 在MFC中加入多种控件分别控制盾构机的刀盘、管片安装机、注浆管、带式运输机等部件的运动。

    Add a variety of control to control movement of some components in the program , such as cutter of shield machine , segment installation machine , grouting pipe , belt conveyors .

  13. 通过阅读、分析及综合大量文献,结合液压技术、经典控制策略、PLC控制及系统仿真技术对盾构机试验台加载系统进行了设计研究。

    We have a design and research on the rig loaded shield electro-hydraulic control system , through reading , analysis and synthesis a large number of documents , combined with hydraulic technology , the classical control strategy , PLC control and system simulation technology .

  14. 而其中土压平衡式盾构机(EPB)又以其技术及经济上的优越性,在盾构施工法中占有绝对的优势地位,成为城市地下工程施工技术的主流。

    With the superiority of technology and economy , EPB shield machine has been in the overwhelming dominance and become the mainstream in construction technology of urban underground engineering field .

  15. 以德国VMT公司的TMB制导系统SLS-T为例,主要解析了盾构机轴线方位角测量原理,并完整地推导了盾构机姿态参数公式。

    The paper parses the principle of measuring shield machine azimuth and deduces shield machine attitude parameter formulas based on TMB guidance system SLS-T from VMT Gmbh in Germany .

  16. 配备自动定压同步注浆系统,并设有备用的注浆管路。配备SLS一TAPD自动测量导向系统,可适时测控盾构机姿态和管片拼装精度。

    Data gathering and teletransmission system can be office managing tunneling , it 's fitted with automatic synchronous pouring system of confirmed pressure and SLS-T APD automatic measuring and guiding system , which can control posture of the shield and assembly accuracy of segments .

  17. 德制AVN3080漏水平衡式盾构机在掘进过程中,刀盘主轴承密封损坏,对此提出3种修复方案。

    In the course of digging , a main bearing seal at the cutterhead of AVN3080 water leak type shield construction machine made in Germany was damaged .

  18. 主要介绍AVN2440DS复合式盾构机在全部以零件形式拆除的情况下如何进行组装,在组装过程中主要应注意的细节技术;

    The article describes the assembly method of AVN2440DS shield machine on basis of parts and elements , as well as the technical details of the assembly to which special attention should be paid .

  19. 盾构机在长距离硬岩中掘进的探讨

    Exploration on Tunnelling by Shield Machine in Long-distance Hard Rock Area

  20. 国产盾构机液压与电器控制系统简介

    The Brief of Hydraulic and Electrical Control System for Tunnel Machine

  21. 盾构机掘进热平衡问题的分析与计算

    Calculation and Analysis of Heat Balance of Boring of Shield TBMs

  22. 成都地铁天府广场站盾构机调头技术

    The shield machine turnaround technology in Tianfu square of Chengdu subway

  23. 土压平衡盾构机主要技术参数的选择

    Choice of main technical parameter of earth pressure balance shield machine

  24. 土压平衡式盾构机异常现象产生原因和处理方法

    Abnormal phenomena cause and its treatment for soil balance shield machine

  25. 土压平衡盾构机的计算机辅助造型设计

    Computer Aid Design for the Earth Pressure Balance Tunnel Boring Machine

  26. 土压平衡式盾构机泡沫系统及其故障排除

    Foam system of earth pressure balance shield machine and its troubleshooting

  27. 盾构机激光导向系统原理

    The principle of laser navigation system of the tunnel boring machine

  28. 土压平衡盾构机参数化建模的基本方法

    The Basic Method of Parametric Modeling for Soil Pressure Balance Boring Shield

  29. φ6.34m土压平衡盾构机三维参数化建模研究

    The parameterized design of φ 6 . 34m earth pressure balance TBM

  30. 盾构机轴线方位角解算原理研究

    A Study of Computation Theory of the Axis Azimuth of Shield Machine