燃烧热

上海城市污泥燃烧热的测定

Determination of Heat of Combustion for the Urban Sludge in Shanghai

三种煤样燃烧热的测定

The assay of heat of combustion of the three kind of coal

用IR，UV表征了产物。测定了产物的燃烧热为3181.75kJ/mol，解释了反应过程中的强放热现象。

The product was characterized by IR , UV . Combustion heat of product is 3181.75 kJ / mol , which unpuzzle strong exothermic phenomenon in reaction .

本文按照有机物完全氧化原理，对一些有机物的COD值进行了理论计算，并与实测值进行了比较分析，还探讨了COD与燃烧热（AH）之间的相关性。

Based on full oxidation theory of organic compound , This writer has calcula-ted COD of certain organic compound , and compared it with the practical tested result . The Interrelation of COD with (?)

电站锅炉的热效率是衡量燃煤锅炉和发电机组运行经济性的重要指标，机械不完全燃烧热损失q4是影响锅炉运行热效率的最主要因素之一。

Thermal efficiency in boilers ' operation is an important index for evaluating economy of coal-fired boilers and generator units .

量热计测定结果表明，不同地区银杏（Ginkgobiloba）叶热值（caloriccontent，亦称等容燃烧热，Qv）不同，显示地域性条件对银杏叶能态具有较大影响。

It is proved by determination of caloric meter that ginkgo leaves from different areas vary on their caloric content , which shows that local condition can affect greatly on the leaves ' energy state .

结果表明，焦炭脱附热为2350kJ/kg焦炭，占焦炭燃烧热的6.3%，比ESSO公司提出的11.5%低得多。

The desorption heat of the coke from catalyst surface does exist , but its amount is much less than that given by ESSO Corporation .

利用WZR-1A型精密微电脑量热计系统地测量了食用大豆油的恒容燃烧热。

The heat values under constant volume ( Qv ) of edible soya oil were measured with WZR-1A microcomputer calorimetry .

对PMMA和松木两种典型的固体可燃物，采用基于耗氧原理的燃烧热释放速率测量方法，利用锥型量热计系统，在不同外加辐射热作用下测量了热释放率。

In this paper PMMA and pine are chosen as two typical solid materials . The method based on the principle of oxygen consumption is applied , the Calorimetry System is used , and the heat release rates of solid combustion with different fluxes radiant heat are measured .

最后运用燃烧热法再次证实了分散紫HFRL不同晶型的热稳定性。

Then the method of combustion heat is employed to distinguish the stability of heat in different crystal modifications of disperse violet HFRL .

试验结果表明加入CPE之后，复合材料的热释放速率、有效燃烧热、质量损失速率显著降低，当CPE质量用量28%时，复合材料能达到UL94V-0级阻燃要求；

The experiment showed that the properties of ABS composites , such as heat release rate , effective heat of combustion , mass loss rate , were dramatically decreased with the increase of CPE content . The composites met the requirement of UL 94V-0 when CPE content was 28wt % .

循环流化床锅炉机械未完全燃烧热损失计算方法的探讨

Discussion on the Calculating Method for Carbon Loss of CFB Boiler

这些结果对安全地测定燃烧热具有指导意义。

These results are instructively important for determining combustion heat safely .

福建市场常见装饰装修板材燃烧热释放率研究

Burning Heat Release Rate of Some Decorative Board on Fujian Market

用回归方程估算泥炭腐植酸含量和燃烧热

Regressive Equations for Evaluating Peat Combustion Heat and Humic Acid Content

端基对饱和直链烃燃烧热的影响

Effect on Combustion Heat of Saturated straight-chain paraffin with Terminal Group

江苏省61个树种木材燃烧热的测定

(?) etermination of combustion heat for 61 tree species in Jiangsu

因子分析在机械未完全燃烧热损失研究中的应用

Application of factor analysis on study of heat loss mechanically incomplete combustion

乳液结构与乳化燃油燃烧热的关系

Relationship between Structure and Combustion Heat in Emulsion Fuel Oil

关于《燃烧热的测定》实验中热平衡计算式的商榷

Discussion of Heat Equilibrium Formula in the Experiment of Combustion Heat Determination

碳氢燃料燃烧热效应的化学平衡算法

Method to Estimate Thermal Results of Hydrocarbon Combustion Based on Chemical Equilibrium

链烷烃标准燃烧热的拓朴计算法

Calculation of standard combustion heat for paraffin by Topologic method

沙棘果粉燃烧热的测定研究

On The Measurement Of Burned Heat Of H · Rhamnoides Fruit Powder

阻燃木材的燃烧热释放率研究

Study on Burning Heat Release Rate of Fire Retardant Wood

国家燃烧热基准的技术改造

Technological improvement of the national primary st and ard of combustion heat

应用定量结构-性质相关性研究预测液态烃燃烧热

Quantitative Structure-Property Relationship Study for Predicting Heat of Combustion of Liquid Hydrocarbon

机器故障的损失工时机械不完全燃烧热损失

Machine-spoiled work time heat loss due to combustibles in refuse

煤粉燃烧热态试验台的分类及煤粉燃烧器结构特性热态试验台的设计

Pulverized Coal Combustion Test Rig-Classification and Burner Structure Test Design , Power Engineering

燃烧热测定实验失败原因的剖析

An Analysis of the Failure in the Experiment of Measuring Heat of Combustion

有机物燃烧热测定方法的改进

Improvement of the method for determining the combustion heat of the organic compounds