气动马达

  • 网络Air motors
气动马达气动马达
  1. 精信气动马达携手优质的零部件生产商,共同打造值得您信赖的品质。

    KASA air motors combined with quality components to present the reliable and extremely performance .

  2. 其方法也适用于其他活塞数的气动马达或液压马达转矩的推导。

    The method is also can used for derivation of pulsating torque of air motors with different pistons and hydraulic motors .

  3. 基于GT-Power的气动马达消声器性能研究

    Simulation Research on Muffler for Air Motor Based on GT-Power

  4. 用GT-Power软件对气动马达使用的消声器分3组10种模型进行了建模和仿真,通过对比发现在消声器壳体内壁粘贴吸声材料,且材料密度越大,降噪效果越好;

    10 mufflers of different structure in 3 groups were simulated by GT-Power . To install noise absorption material in the cylindrical muffler enhanced the noise reduction , and the density of the material affects the noise reduction .

  5. 长气管气动马达速度控制系统及分析

    Air motor speed control system with long tube and its analysis

  6. 叶片式气动马达轴向间隙的优化设计

    Optimum Design of Axis - direction Clearance of Pneumatic Vane Motor

  7. 透平气动马达转子系统的动力学特性研究

    Research on Dynamic Characteristics of Pneumatic Turbine Motor 's Rotor System

  8. 锚杆钻机气动马达是该设备的核心部件。

    Pneumatic motor is a kernel part of the roof bolter .

  9. 双作用叶片式气动马达的探讨

    A search for double-functioned vane - type ( pneumatic ) motor s

  10. 锚杆钻机气动马达消声器的实验研究

    Experiment study of muffler for pneumatic motor in roof bolter

  11. 活塞式气动马达脉动转矩解析

    Analysis of Pulsating Torque of Air Motor With Pistons

  12. 金属空心轴齿轮气动马达设计

    The design of pneumatic motor with hollow metal gear

  13. 开关阀式气动马达位置伺服系统的研究

    Research on pneumatic on-off valve motor position servo control

  14. 催化重整装置气动马达阀控制系统智能化改进

    Intelligent improvement of aerodynamics motor valve on reforming unit

  15. 目前,叶片式气动马达广泛应用于矿山及风动工具中。

    Now , pneumatic vane motors are widely used in mine and pneumatic tools .

  16. 气动马达降噪研究

    Study on Noise Reduction of Aerodynamic Motor

  17. 一种新型气动马达的研究

    Research of a New Pneumatic Motor

  18. 锚杆钻机气动马达微穿孔板消声器的理论分析与实验研究

    Theoretical and Experimental Study of the Micro Perforated Panel Muffler for Pneumatic Motor in Roof Bolter

  19. 轴向间隙影响着叶片式气动马达的容积效率和机械效率。

    Axis - direction clearance influences the volumetric efficiency and the torque efficiency of pneumatic vane motor .

  20. 扭力扳子内装气动马达,从预紧固到最终紧固,一次操作完成即可。

    After provisional tightening by an air motor at high speed , final torque set is performed manually .

  21. 基于厘米级反击式微型透平机的透平气动马达,是项目组所提出的一类新型气动马达。

    The pneumatic turbine motor based on the centimeter-scale reaction turbine is a new type of pneumatic turbine motors .

  22. 为了适应易燃、易爆及防磁的工作环境,该文研制了一种冲击式小型气动马达。

    An impacted mini-air-motor is studied and developed to be applied in the combustible , explosive and antimagnetic conditions .

  23. 气动马达执行机构通常用于很危险的区域,在那种地方没有电源或者不允许电源存在。

    Air motor actuators are often specified in very hazardous locations where electric power is not available or permitted .

  24. 本文利用优化设计原理确定叶片式气动马达的最优轴向间隙。

    By optimum design theory , the best axis - direction clearance of pneumatic vane motor is obtained in this paper .

  25. 实验表明:该控制系统可有效控制气动马达转速,得到可调节的喂丝速度。

    Designed system can control the rotation speed of pneumatic motor effectively and thus get the adjustable feeding speed of the thread .

  26. 在微穿孔板消声理论的基础上,根据气动马达消声器的实际需要设计了一种微穿孔板消声器,并通过实验对这种消声器的消声特性和流阻进行了研究。

    Based on theory about micro perforated panel , a micro perforated panel muffler was developed to meet the requirement of the pneumatic motor in roofbolter .

  27. 分析了气动马达阀控制系统原理及存在的问题,提出了改进方案,对其控制系统进行了智能化改进。

    The control-system principle of aerodynamics motor valve and the problem of it are analysised , the plans of improvement is suggested , the control-system is reformed with intelligence .

  28. 本文根据齿轮式气动马达的结构和工作原理,按照流体力学方法对齿轮气动马达的理论流量和泄漏流量以及效率分别进行了理论推导。

    According to the structure and principles of the gear motor , and based on fluid dynamics theory , the theory flow rate and the leakage flow rate and the efficiency of a gear motor were derived .

  29. 根据齿轮式气动马达的结构和工作原理,按照流体力学方法推导了气动齿轮马达的径向泄漏耗气量和轴向泄漏耗气量,对一种锚杆钻机使用的气动齿轮马达进行了泄漏量计算。

    According to the structure and principles of the gear motor , and based on fluid dynamics theory , the radial leakage and axial leakage flow rate of a gear motor were derived , and a calculation example was given for the gear motor used in the roof bolter .

  30. 气动齿轮马达泄漏量的计算研究

    Calculation and Study of Leakage of Pneumatic Gear Motor