单轴

含裂隙水脆性材料单轴压缩CT分析

CT analyses of brittle materials under hydraulic Pressure and uniaxial compression

基于单轴压缩CT实验的砂岩破损机制

Breakage mechanism of sandstone based on uniaxial compression CT test

单轴经济切割机可处理大多数材料，包括乙烯，塑料薄膜，无纺布，泡沫和纸张

Single shaft economy slitter handles most materials including vinyl , plastic films , non-woven s , foams and paper .

建议了一个可用岩石初始状态CT数和弹性模量的单轴损伤本构方程，并用算例进行了验证；

A axial damage constitutive equation is proposed and testified .

岩石单轴受力CT识别损伤本构关系的探讨

The Discussion about Damage Constitutive Relation of Rock under Uniaxial Stress Identified by CT

单轴压缩岩石蠕变损伤扩展细观机理CT实时试验

CT real-time testing on meso-mechanism of creep damage propagation in rock under uniaxial compression

N取代液晶聚吡咯在摩擦力的作用下还可以诱发单轴取向。

Uniaxial orientation of LC N substituted polypyrrole can be formed by a friction technique .

并进行了BP神经网络预测冻土单轴抗压强度的研究。

And has conducted the BP network forecast frozen soil uniaxial compressive strength research .

基于SEM的大理岩单轴受压全过程细观损伤量化研究

SEM-Based Investigation on the Quantification of Meso-Damage of Marble under Uniaxial Compression

SiCp/6061Al合金复合材料的室温单轴棘轮行为及热处理工艺的影响

Uniaxial ratcheting of SiCp / 6061Al alloy composites at room temperature and the effect of heat treatment

SS3型机车加装单轴粘着控制系统的探讨

Approach to Add-assembly of Single-axle Adherence Control System on Type SS_3 Electric Locomotive

在实验的基础上，对单轴PMMA试件的蠕变型本构关系进行了研究。

Basing on experiments , the creep constitutive relations of PMMA were researched .

采用DSC研究了不同拉伸比的单轴取向PET纤维在不同湿度下的冷结晶过程。

The cool crystallization of uniaxially oriented PET was studied at different draw ratios and humidity by DSC .

基于对裂隙岩石的细观CT试验，对含有单一裂纹的贵溪红砂岩在单轴疲劳荷载作用下的损伤扩展机理和演化过程进行了初步的试验研究。

Based on real time CT testing , primary testing study of fatigue failure and deformation mechanism of red sandstone has been completed under uniaxial compression condition .

利用ANSYS有限元程序对单轴对称工字形单伸臂梁和双跨连续梁整体稳定试验进行了有限元模拟。

The overall stability tests of monosymmetric I-shaped overhanging beams and two-span continuous beams are simulated by finite element program ANSYS .

通过采用2－D全波离散镜像技术得到了单轴各向异性分层介质结构的空域Green函数的解析形式。

The spatial domain Green ′ s functions for uniaxial layered structures are cast into closed forms by using 2 D full wave discrete images ( FWDI ) technique .

但由于高能X射线照相系统本身很复杂，使其成像数目受限制，目前仅能实现单轴或双轴照相。

Because the high-energy x-ray radiography system is complicated , the number of views is limited , and it only can take a single or two radiographs once .

对于近谱变化剧烈的单轴各向异性介质的谱域Green函数，采用了矩阵束方法进行拟合。

In order to catch the fast change of the near spectrum of the spectral domain Green ′ s function of uniaxial medium , the matrix pencil method ( MPM ) is used .

提出一种基于GA的自适应模糊积分型滑模控制策略，并将其用于具有非线性动态摩擦力的单轴运动控制系统中。

An adaptive fuzzy integral type sliding mode control method based on GA was proposed to control single-axis motion control system with nonlinear dynamic friction .

与各向同性手征介质±n阶分裂模明显不同的是，单轴手征介质填充圆柱波导中±n阶模式波的传播速度是相等的。

It is shown that the ± n order mode waves propagate with the same velocity in cylindrical uniaxial chiral waveguide , while they split in the waveguide filled with isotropic chiral medium .

此外，文章还叙述了SR机器人系统单轴运动、直线轨迹运动的调试过程与故障处理方法。

Besides the single axis locomotion , the debugging procession of beeline trajectory locomotion , and the trouble disposal method are also recounted .

将多层各向同性有耗介质平面结构的反射系数公式推广到含有单轴媒质层的多层平面结构，运用GA对这种复合介质结构的吸波特性进行优化。

The reflection coefficient of stratified dielectric planar structures with uniaxial medium included is formulated . GA is employed in the optimization of reflection characteristic of this composite dielectric structure .

通过单轴拉伸工艺制备了PVDF压电薄膜，运用X射线衍射和FTIR分析技术分析了不同拉伸速率下薄膜的微观结构；

PVDF piezoelectric films were prepared by uniaxial stretching . The techniques of X-ray Diffraction and FTIR were used to analyze the microstructure of the films stretched under the different rate .

选择了两种键合剂制备了RDX／HTPB推进剂，测定了推进剂的单轴拉伸力学性能和单轴拉伸破坏能。

Selected two bonding agents , two RDX / HTPB propellant were made separately . Uniaxial stretch property and rupture energy were determined .

采用取向分布函数（ODF）研究了纯铝板材单轴拉伸过程中的织构演变规律。

Texture changes of aluminum sheet after different uniaxial tensile deformations were investigated with the aid of the experimentally determined orientation distribution functions .

通过单轴压缩及TEM原位拉伸研究了全层状TiAl合金（PST晶体）中α2板条的形变和断裂特征。

The deformation and fracture characteristics of α 2 plates in fully lamellar TiAl alloys ( PST crystals ) were investigated through uniaxial compression and in situ TEM technique .

然后在泡水和不泡水状态下测定其CBR值，接着用单轴固结测定其孔隙比，以评定其压缩性能。

Then determination in water and does not dip water condition the CBR value , determined by uniaxial consolidation and the void ratio , compression in order to assess its performance .

通过对-5℃冻结黄土的蠕变CT扫描发现，在单轴蠕变过程中土层密度和CT值在加荷瞬间增加后持续减小，冻土的体积随时间的发展而持续增加；

Through CT scanning , it was found that the density and CT value of soil layer decreased continuously after instantaneous increase at the beginning of loading and the volume of frozen soil increased continuously with time in uniaxial creep process of frozen soil .

这种组合而成的多层膜矫顽力低，单轴各向异性明显，各向异性等效场Hk高，热稳定性优良，非常适合应用于超高密度磁记录头。

The resultant multilayer films exhibit excellent uniaxial-anisotropy soft magnetic properties with low coercivity and high anisotropy field Hk , which are very attractive for applications in thin-film heads for ultrahigh-density magnetic recording .

本文表明，单轴晶体的喇曼光谱，对于非极性模和A（z）（或B（z））模，在各种几何配置下，x轴和y轴都是等效的。

In this paper , we show that in Raman spectrum of uniaxial crystals , for nonpolar mode and A ( z ) ( or B ( z )) mode , under any scattering geometry , x-axis and y-axis are always equivalent .