加热过程

  • 网络Heating process
加热过程加热过程
  1. 通过紫外-可见吸收光谱能够反应出加热过程中Ag壳层的变化。

    The change of the Ag shell with the heating process could be reflected from the UV-vis absorption spectrum .

  2. 300MW机组锅炉启动上水加热过程探讨

    Discussion on the Water Feeding and Heating Process of a 300 MW Power Unit Boiler during Start-up

  3. 枣浆在加热过程中,体系的自然pH值呈下降的趋势。

    During heating of Jujube pulp , pH value decreases .

  4. 基于ANSYS的织针淬火加热过程的温度场模拟

    Temperature field simulation of the needle quenching process based on the ANSYS

  5. 通过对不同混合比的钙基脱硫灰样熔融特性温度的测定、利用X射线衍射分析对加热过程中钙基脱硫灰样的矿物质特性进行了分析。

    The coal ash fusion temperature was measured . The mineral behavior in ash was analyzed by X-ray diffraction .

  6. 煤灰中CaO在加热过程中固硫过程的研究

    Study on the Desulphurization Behavior of CaO in Coal Ashes During Heating

  7. 采用SDS-PAGE分析了白鲢鱼肉蛋白质组分在加热过程中的变性与稳定性特点。

    Denaturation degree and stability feature of protein components during heating were analysised by SDS-PAGE electropheresis .

  8. 用XRD,IR,SEM,TGDTA等测试手段详细研究了涂膜在加热过程中所发生的物理-化学变化。

    XRD , IR , SEM and TG DTA were used to study the chemical physical change of the film at different temperatures .

  9. UF与麦秸混合物在加热过程中,两者之间的胶合热反应不明显。

    In the course of heating wheat straw and UF the gluing reaction is not evidence between them .

  10. 结合MATLAB对状态方程的模拟数据,研究了钢丝感应加热过程中轴向和径向温度场特性以及温度和时间的关系;

    Based on the simulation datas of the state equation from MATLAB , study the temperature field in axis and radius orientation during heating ; study the relationship between temperature and time ;

  11. 以日本AR中间相沥青为原料,通过对其元素分析、红外光谱分析、热台偏光显微镜观察及流动特性测试等,确定其组成及结构,分析加热过程中其形态结构变化。

    The composition and structure of AR mesophase pitch were studied by the means of elemental analysis , FT-IR , polarized light microscop with hot-stage and so on .

  12. 采用DSC和热膨胀仪对石英新砂和经900℃焙烧砂在加热过程中的相变和热膨胀进行了分析。

    During heating , phase transformation and expansibility of the new quartz sands and the quartz sands calcined at 900 ℃ was analyzed by DSC and thermodilatometry .

  13. 为了分析片材内部的温度分布情况,将片材沿厚度方向离散分为N个等温层,以层为单位,研究加热过程片材温度分布模型。

    In order to analyzing the temperature distribution of the interior sheet , the sheet is divided into N isothermal layers along its thickness . With layer as unit , the temperature variation during reheat process is considered .

  14. 均热炉的加热过程模拟系统是CSP生产线组织性能预报软件的重要组成部分;

    The reheating process simulation system of reheating furnace is the important component of microstructure and performance prediction software of CSP production line of Zhujiang Iron and Steel Co.

  15. 利用原位X射线衍射及线形分析方法,测量加热过程中冷轧SiCw/Al复合材料基体晶块尺寸及显微畸变的变化规律,探讨复合材料再结晶行为。

    By using in situ X-ray diffraction and profile analysis , the variations of subgrain size and microstrain in the cold-rolled SiCw / Al composite at high temperature were measured , and the recrystallization behavior of composite was investigated .

  16. 在加热过程中,MgO的晶粒尺寸随保温时间的延长而增大,晶格畸变随保温时间的延长而降低,但加热温度对晶粒尺寸和晶格畸变的影响不明显。

    ( 5 ) The grain size of MgO increases and the distortion of lattice decreases with prolonging soaking time . However , the influence of heating temperature is not obvious .

  17. 本文通过X射线衍射定性及定量地分析了在100~1100℃的加热过程中,含有一定量H3BO3的共沉淀FSZ粉料中相结构的变化。

    During the heating process ranging from 100 ℃ to 1100 ℃, the phase transformations in co-precipitated FSZ powder containing certain amount of H_3BO_3 were analyzed qualitatively and quantitatively by means of XRD .

  18. 通过测试Cu-Cr-Zr合金在等速加热过程中电阻率的变化,对该合金等速加热时效动力学进行了研究。

    The continuous-heating aging kinetics of the Cu-Cr-Zr alloy was studied by measuring the resistivity ratio of the alloy in the continuous-heating process .

  19. 结果表明:在激光辐照加热过程中,TiC颗粒发生了部分溶解,在冷却过程中溶解在Ni基合金中的Ti和C原子又以TiC颗粒和树枝晶形式沉淀析出。

    The experimental results show that during laser irradiation heating , TiC particles are partially dissolved into the melted Ni-base alloy , and the dissolved Ti and C atoms are precipitated in the forms of TiC particles and TiC dendrites during cooling .

  20. 研究了近液相线半连续铸造ZL201合金的微观组织及其在二次加热过程中的变化。

    The casting and remelted microstructures of ZL201 alloy cast by liquidus semi-continuous casting ( LSC ) were studied .

  21. 利用MRI快速测定欧姆加热过程中的温度,构建温度瞬时分布图,为建立欧姆加热的数学模型,加快欧姆加热的工业化进程提供依据。

    MRI is a good tool to quickly determine the temperature of Ohmic heating foods . So , we can use MRI to draw the instantaneous temperature distribution map , and develop the mathematical model of Ohmic heating , and found the basis of industrialized Ohmic heating .

  22. 以亚硝酸钠,游离氨基酸(FAA),游离脂肪酸(FFA)以及脂肪氧化度为指标研究了腊肠在烘箱加热过程中的动态化学变化。

    This paper studies the dynamic chemical changes of sausage during oven-heating by using sodium nitrite , free amino acids ( FAA ), free fatty acids ( FFA ) and oxidation of fat as indicators .

  23. 胡椒提取物具有较强的热稳定性,高温长时间(200℃,25h)加热过程中,0.08%和0.12%胡椒提取物对猪油及棕油的抗氧化效果较好。

    Pepper extract ( 0.08 % ) has better antioxidative effect to palm oil and lard when it heats long time ( 200 ° C , 25 h ) .

  24. 采用织构定量检测、EBSD微取向分析、晶粒尺寸分析等手段研究了退火加热过程对高压电解电容器阳极铝箔立方织构的影响。

    The influence of annealing process on the cube texture formation in aluminum foil of high voltage anode electrolytic capacitor was investigated using the quantitative texture analysis , EBSD micro orientation analysis , as well as grain size measurement .

  25. 但激光重熔有典型的钎料加热过程,而MSDB是单纯的钎料温度下降过程,液态钎料未达到温度平衡即完成凝固。

    However , it is a typical heat process in laser reflow while it is a purely temperature reduction process in MSDB . Liquid solder solidified before reaching temperature equilibrium .

  26. V-Ti直接淬火钢在加热过程中,奥氏体主要集中于原始奥氏体晶界、铁素体晶界、铁素体/马氏体界面等大角度晶界处形核,且新形成的奥氏体晶粒基本呈球状。

    The globular austenite nuclei intensely formed at the high angle boundaries in V-Ti microalloyed steel during the reheating process , such as prior austenite grain boundary , ferrite grain boundary , ferrite / martensite boundary and so on .

  27. 这里包含了大气通过线性风应力影响海洋,海洋通过加热过程影响大气的物理机制。用相平面理论讨论了海气耦合作用对简单耦合线性Rossby波和非线性Rossby波的影响。

    ( The ocean is affected by the atmosphere by linear wind stress and the atmosphere is influenced by the heating of SST ) The effects of coupled ocean atmosphere interaction ( represented as R ) on the linear and nonlinear coupled Rossby waves are discussed with travelling wave method .

  28. 六流连铸中间包等离子加热过程的数值模拟

    Numerical simulation of the plasma heating process in a six-strand tundish

  29. Ag/Ni超晶格薄膜加热过程的原位电镜观察

    In-situ TEM Observation of Ag / Ni Super-Lattice Films During Heating

  30. 炮塔加热过程数学模型与计算机仿真研究

    Mathematical Model and Computer Emulation in the Heating Process of Turret