丙三醇

丙三醇对水热法制备TiO2微粒粒径及分布的影响

Effects of glycerin on the size and distribution of TiO_2 superfine particles prepared by hydrothermal method

将己内酰胺、丙三醇、二甘醇、糖用作低压短周期三聚氰胺甲醛（MF）树脂的改性剂。

Hexanolactam , glycerin , diethylene glycol and sugar are usually used as modifier of melamine resin in short cycle under the low pressure .

罗丹明B丙三醇溶液荧光的斯托克斯参数测量

Measuring the Stokes parameters of Rhodamine B glycerol solution fluorescence

丙三醇在Ni7Zr2电极上的电氧化

The electrochemical oxidation of glycerol on ni_7zr_ 2 electrode

以乙酸锌为原料，采用丙三醇常压回流法制备了二维片状纳米结构ZnO（简称ZnO薄片）。

ZnO nano-flakes were prepared from zinc acetate by atmospheric refluxing with glycerol .

研究了丙三醇对淀粉塑化前后结构的影响，用X射线衍射仪对淀粉塑化前后的结晶性能进行了研究。

The effect of glycerol to the starch structure and the crystal property were studied by SEM and XRD .

实验结果表明，以丙三醇作为溶剂使催化剂进行循环，能提高EG的选择性，效果好于以生成的EG作为溶剂循环催化剂。

Choosing glycerol as solvent to recycle catalyst can raise selectivity of EG.

丙三醇在Pt电极上吸附和氧化过程的原位FTIR反射光谱研究

Adsorption and Oxidation of Glycerol on Platinum Electrodes Investigated by in situ FTIR Spectroscopy

丙三醇浓溶液玻璃化转变与结构松弛参数DSC分析

Glass Transition and Structure Relaxation Parameters of Glycerol / Water Mixtures with High Concentrations : A DSC Study

三氟乙酸和丙三醇双掺TGS晶体生长与性能研究

Study on Growth and Properties of Doped TGS Crystal THREE-SPIN THEORY

结果表明，在本文所采用的锆溶胶体系中，以PVA为增稠剂、丙三醇等中性物质为干燥控制剂最为合适；

It shows that PVA and neutral DCCA such as glycerol are most suitable for zirconium sol system selected in this paper .

异亚丙基丙三醇的合成Ⅱ组：甘油-蜂蜜型（G-H）；

Second group : glycerol - honey ( G - H );

研究了RPA、AKD及丙三醇（GL）对复合膜力学性能的影响。

The influences of RPA , AKD and glycerol ( GL ) on the mechanical properties of the films were investigated .

以转谷氨酰胺酶（mTG）改性明胶为基料、丙三醇为增塑剂制备可食性食品包装薄膜。

Edible films were prepared from microbial transglutaminase ( mTG ) modified gelatin , with glycerol as the plasticizer .

C2～C3多元醇是指乙二醇、丙二醇和丙三醇，广泛应用于化纤、汽车、食品和医药等行业中。

C2 ~ C3 polyhydric alcohols including ethylene glycol , propylene glycol and glycerol are widely used in the chemical fibre , automobile , food and medical industries .

运用电化学循环伏安和石英晶体微天平研究了丙三醇在Pt电极和以Sb，S吸附原子修饰的Pt（Pt/Sbad和Pt/Sad）电极上的吸附和氧化过程。

The processes of adsorption and oxidation of glycerol on Pt , Pt / Sb ad and Pt / S ad electrodes were studied by using Cyclic voltammetry and electrochemical quartz crystal microbalance ( EQCM ) .

然后以丙三醇为增塑剂，采用热压成型的方法制备了一系列SPI膜和SPI-g-PCL膜。

After that , the SPI and SPI-g-PCL were compression-molded into the films by using glycerol as the plasticizer .

以己二酸、1,4-丁二醇、己二胺和己内酰胺为原料，丙三醇为支化剂，采用熔融缩聚法合成了可生物降解的脂肪族支化聚酰胺酯（PEAs）。

A series of biodegradable aliphatic branched polyesteramides ( PEAs ) were synthesized from adipic acid , 1,4-butanediol , hexamethylene diamine and caprolactam by melt polycondensation method using glycerol as branching agent .

具体研究内容和结果如下：1、研究了三种硫化助剂&丙三醇、三羟甲基丙烷和季戊四醇对共聚型氯醚橡胶（ECO）硫化特性、交联密度及力学性能的影响。

Details are as follows : 1 . Effects of three kinds of vulcanization assistants ( glycerol , trimethylolpropane , pentaerythritol ) on the curing characteristics , crosslinking densities and mechanical properties of epichlorohydrin rubber have been evaluated .

探讨了用增塑剂二甲基硅油、丙三醇和1，2-丙二醇降低甲基乙烯基硅橡胶（MVQ）硫化胶模量的途径。

A study was made on the application of dimethyl silicone oil , propanetriol and1,2 propanediol to decrease the modulus of MVQ vulcanizate .

首次使用葡萄糖与丙三醇混合高渗制剂进行了提高OCT成像深度和图像对比度的试验，并得到使用混合溶液较丙三醇可提高人群敏感度的初步结果。

Using hyperosmotic mixture of glycerin and glucose in experiment , the visible depth and contrast of OCT was concurrent enhanced . It is proved that the mixture has higher human sensitivity than using glycerin alone .

以聚乙烯醇1788（PVA）作为原料，以丙三醇为增塑剂，加入0%~2.5%的淀粉，对水转印PVA膜进行了改性研究。

In this paper , the modification of water transfer PVA sheet was investigated through the addition of 0 % ~ 2.5 % starch , with the polyvinyl alcohol 1788 ( PVA ) as raw materials and glycerin as plasticizer .

丙三醇PU和蓖麻油PL1分别改性的有机硅树脂在性能上有明显差异，前者的拉伸强度优于后者，但热性能较差。

The silicone rubber modified by polyurethane of glyceryl alcohol or ricinus oil are obviously different , the front has better tensile intensity than the latter one , but its heat properties is bad .

在丙三醇溶液中处理的材料首容量（放电比容量342.3mAh·g-1）和循环性能均有明显提高。

The initial capacity of materials treated in glycerin solution ( specific discharge capacity is 342.3mAh · g-1 ) and cycle properties are both obviously improved .

在4×10~（-5）MZincon-0.2MNH4AC-2.4%丙三醇-0.8%Na2SO3溶液中，Cu（Ⅱ）-Zincon络合物在单扫描示波极谱仪上有一灵敏的极谱吸附波，其峰电位为-0.68v（vs.SCE）。

In the solution of 4 × 10 ~ ( - 5 ) M Zincon-0.2M NH_4AC-2.4 % glycerin , copper (ⅱ) - Zincon complex has a sensitive polarographic adsorptive wave , as shown by single sweep polarography .

结果表明，当丙三醇与甲基叔丁基醚的质量比为11时，6d内降解效果达到80.200/，降解能力提高了1.8倍。

The results show that when the mass ratio of glycerol to MTBE is 1 ∶ 1 , the degradation rate can reach 80.20/0 after 6 days and the degradation ability increases 1.8 times .

以高价铈盐（硝酸铈铵）和多羟基有机物（丙三醇、季戊四醇、蔗糖）组成的氧化还原引发体系为引发剂引发丙烯酰胺（AM）自由基聚合，采用1H-NMR和SEC方法对产物进行结构表征。

Acrylamide polymerization was conducted using Ce ~ ( 4 + ) and multi-hydroxyl reducer ( such as 1,2,3-propanetriol , pentaerythritol and sucrose ) as initiator systems . Polyacrylamide synthesized were characterized by () ~ 1H-NMR and SEC , and star-structure was displayed .

此外，在外加一些添加剂时对其产生有机酸也有影响，如添加1%油酸和VB1时可以降低乙酸的积累，同时增加丙酮酸的含量，丙三醇产量也有所增加；

In addition , the additive also can change the production of organic acids , with the addition of 1 % oleic acid or V B1 the acetate concentration could be decreased and increased the production of pyruvate , hence , improve the yield of glycerol .

具体归纳如下：（1）以金属有机配位聚合物（MOCP）为炭前躯体，丙三醇为添加剂，采用高温煅烧法直接合成出孔径具有双峰分布的蠕虫状介孔炭。

The major contents can be summarized as follows : ( 1 ) In this paper , worm-like mesoporous carbon was synthesized with metal-organic coordination polymers ( MOCP ) as the carbon precursor , glycerol as additive , and directly calcined under a high temperature .

丙三醇缩水甘油醚和壳聚糖对蚕丝织物的复合整理

Finishing of silk fabric with propanetriol - diglycidyl ether and chitosan