vacuum induction furnace

The maser alloys for rapid solidification , powder metallurgy and spray and deposition investigations are prepared in vacuum induction furnace .

快速凝固、粉末冶金和喷射沉积所用的母合金在真空感应炉中熔炼。

The medium carbon alloy steel Cr-Ni-Mo was melted by a 50 kg vacuum induction furnace , and the mechanical properties of test steel-maximum load and reduction of area at 600 ~ 1 400 ℃ have been measured by Gleeble-3800 test machine .

中碳Cr-Ni-Mo合金钢用50kg真空感应炉冶炼，并通过Gleeble-3800试验机测定了该试验钢在600～1400℃的力学性能-最大力值（载荷）和断面收缩率。

The application of T-S fuzzy model in vacuum induction furnace for temperature prediction

T-S模糊模型在真空感应炉出钢温度预测中的应用

Research of End-point Prediction Method to Vacuum Induction Furnace

真空感应炉终点预报方法的研究

The application of CaO crucible in high temperature smelting alloy in vacuum induction furnace was introduced .

此外简单介绍了氧化钙坩埚在真空感应炉中冶炼高温合金的使用情况。

Smelting of high nitrogen martensitic stainless steels by vacuum induction furnace under near normal protective atmosphere

真空感应炉近常压气氛保护熔炼高氮马氏体不锈钢

High Nitrogen Cr-Mn-Mo-Cu Austenite Stainless Steel Melted by Vacuum Induction Furnace Filled Argon

真空感应炉充氩冶炼高氮Cr-Mn-Mo-Cu奥氏体不锈钢

The hydraulics for a new developed vertical vacuum induction furnace is introduced , including its principle , working program , structure , features .

介绍新研制的立式真空感应熔炼炉的液压系统。阐述该系统工作原理、程序、结构及特点。

The key factor is chemical potential of nitrogen element in determining its solubility when it is molten in vacuum induction furnace .

在中频感应炉中影响氮含量溶解度的决定因素是氮元素的化学势。

The non-metallic inclusions morphology in the steel treated with calcium has been investigated with theoretical calculation and experiment in vacuum induction furnace .

通过理论计算和在真空感应炉中钢水钙处理试验，研究了钙处理对钢中非金属夹杂物形态的影响。

A new high-strength and high-conductivity copper alloy & Cu-Ag-Zr alloy were produced by means of a vacuum induction furnace .

一种新型的高强高导兼顾的铜合金材料&CuAgZr合金，采用真空熔炼的方法制备。

Three kinds of alloys with different compositions were fabricated by vacuum induction furnace . The alloys were soluted and then aging at different temperatures .

本论文采用了真空熔炼法制备了Cu11.5Al5Mn、Cu10.5Al5Mn、Cu12Al6Mn三种成分的形状记忆合金，并对合金进行固溶处理以及不同温度和不同时间的时效处理。

A series of Cu-Li alloys with different contents of lithium have been obtained by means of melting in vacuum induction furnace at Ar atmosphere .

在真空保护气氛下，熔炼不同锂加入量的铜锂合金，用扫描电镜及图像分析仪分析其晶粒大小。

Considering the deficiency of measurement in the melting process , an RBF neural network method is developed to predict the end-point carbon content in the vacuum induction furnace .

针对冶炼过程中碳含量不能直接测定的不足，采用RBF神经网络对真空感应炉的终点碳含量进行预报。

Study on sintering property of corundum based dry ramming mix for intermediate frequency induction furnace IMPROVEMENT ON THE HEATING PERFORMANCES OF VACUUM INDUCTION FURNACE FOR SINTERING SIC CERAMICS

中频感应炉用刚玉质干式捣打料烧结性的研究提高SiC陶瓷烧结用真空中频感应炉加热性能的试验研究

Using sponge iron reduced by iron ore concentrate powder as raw material , the smelting process of pure iron is investigated through non vacuum induction furnace and vacuum induction furnace .

以由铁精矿粉直接还原出来的海绵铁为原料，以非真空感应炉和真空感应炉为冶炼设备，对纯铁的冶炼工艺进行了研究与试验。

The utility model relates to the improvement of a temperature oxygen measuring and carbon sampling sensor used for melting steel , in particular to the melting steel in the vacuum induction furnace .

本实用新型涉及用于钢液，尤其是用于真空感应炉内钢液所用的测温定氧、定碳取样传感器的改进。

The effect of carbon on microstructure and strength of Ni-Cr-W is studied by vacuum induction furnace , metallographic microscope , SEM and X-ray diffraction at 1 150 ℃ .

采用真空感应炉、金相显微镜、扫描电镜及X射线衍射等手段，研究1150℃下C对NiCrW高温合金的组织和高温强度的影响。

The coating of graphite crucible and its preparation technology , and homogeneity controlling for U-Mo alloy are studied when we melt U-Mo alloy in the vacuum induction furnace .

对真空感应熔炼采用的石墨坩埚涂层材料及其制备工艺、合金成分均匀性控制进行了研究。

Abstract The paper introduces test prodUcing high-Ti ferro-titanium according with the quality demands with waste titanium and mild steel in vacuum induction furnace of rough vacuum and melted magnesite pot .

在真空感应炉的低真空度条件下，采用电熔镁砂坩埚.以残钛和低碳钢为原料试生产出符合质量要求的高钛钛铁。

The Cu-10 % Cr-3 % Ag in situ composites that was melted in a vacuum induction furnace and machined by drawing at room temperature combined with intermediate heat treatments .

形变Cu-10%Cr-3%Ag原位复合材料经中频感应加热熔炼、室温线拉并配合中间热处理制备而成。

Cu-Te alloys ( 0.5 % Te , 1.0 % Te , 1.5 % Te ) were melted by vacuum induction furnace and then forged and cold drawn .

采用真空感应炉制备出0.5%Te，1.0%Te，1.5%Te的Cu-Te合金，然后进行了锻造和拉拔工艺试验。

By means of a vacuum induction furnace , Cu-Ag-Cr and Cu-Ag alloy are produced . The influences of trace Cr addition on the recrystallization behavior of the Cu-Ag alloy have been studied by hardness measurement , optical microscope and transmission electron microscope observation .

采用真空熔炼方法制备了Cu-Ag和Cu-Ag-Cr合金，利用硬度测试、金相显微观察和透射电镜分析等方法，研究了Cr对Cu-Ag-Cr合金再结晶行为的影响。

Optimal control of melting stage process in vacuum induction melting furnace

真空感应炉熔化期工艺优化控制

Factors affecting the smelting of high nitrogen steel in vacuum induction melting furnace

真空感应炉冶炼高氮钢的影响因素

Making large crucibles for vacuum induction re-melting furnace by using homemade electric magnesium sand

用国产电熔镁砂制作大型真空感应炉坩埚

Construction , characteristics and applications of ZGL-0.1 model multipurpose vacuum induction melting furnace are described in detail .

详细介绍了ZGL-0.1多功能真空感应熔炼炉的结构、性能、特点及其用途。

A vacuum induction melting furnace with tri-chambers has developed to suit the high needs of the quality and production of engine vanes .

为适应我国的发动机叶片的高质量和高速度生产的要求，开发了三室真空定向结晶炉。

The NdFeB alloy was melted in a vacuum mid-frequency induction furnace and then homogenized .

钕铁硼合金用真空中频感应炉熔制。

This paper introduces the construction and composition of 10L vacuum induction melting furnace , bottom pour-ing and points out some problems during adjusting . It is a reference when designing the same type furnace .

介绍了10L下铸式真空感应熔炼炉的结构及组成，指出了安装和热负荷试车过程中存在的问题及解决方法，设计同类电炉时可作为参考。