theory of lubrication

This dissertation based on the theory of lubrication , studies the thermal elastohydrodynamic lubrication properties of the thrust bearings , including the elastic deformation of thrust bearing , making the analysis of lubrication performance improve .

本文针对上述问题，在润滑分析中考虑了弹性变形的影响，从理论出发对推力轴承热弹性流体润滑进行了研究，建立了更为准确的润滑性能分析式，可以更精确的计算其润滑性能。

The Theory of Elasto-Hydrodynamic Lubrication & The Present Status of Research and Application in Practice

弹性流体力学润滑理论&研究现况及其在实际中的应用

The Application of the Theory of Elastohydrodynamic Lubrication on Microminiaturized Ball Bearing

弹流理论在微型轴承中的应用

Hydrodynamic theory of fluid lubrication

流体润滑的流体动力学理论

The influence of gear parameters on its lubrication effect is studied by the theory of elasto-hydrodynamic lubrication ( EHL ) .

应用弹性流体动力润滑理论，分析了模数、齿数等参数对齿轮副润滑性能的影响。

The influence of gear pressure angle on lubrication oil film thickness was studied by the theory of elasto-hydrodynamic lubrication ( EHL ) .

运用弹流润滑理论，分析了轮齿压力角对润滑油膜厚度的影响。

With elastic plastic bearing as an example , the relevant theory of hydrodynamic lubrication and the effects of the grooved structure on operating characteristic are analysed .

以具有弹性的塑料轴承为例，分析相应的流体动力润滑机理以及水槽结构形式对其运行特性的影响。

Based on the theory of elastohydrodynamic lubrication , the shape problem of rib / roller end of railway car cylindrical roller bearing was discussed in the paper .

本文应用弹性流体动力润滑理论，对铁路客车用圆柱滚子轴承的挡边和滚子端面形状进行了讨论。

Based on the variational inequality theory of hydrodynamic lubrication , this paper presents a fast method to calculate the oil-film forces of journal bearings with the Reynolds boundary condition .

基于流体润滑的变分不等方程理论，提出加权有限元方法求滑动轴承非线性油膜力。

In this paper , the Viscous Boundary Element Method ( VBEM ) was used to treat problems in theory of hydrodynamic lubrication , occurrence of vortex , and biomechanics .

本文叙述了粘性流动边界元方法，并研究了动力润滑、涡旋发生以及生物力学等问题。

Based on theory of hydrodynamic lubrication and principle of thermal balance , a theoretical model was set up in the paper for tire friction on icing road with fully melting contact patch .

依据流体动力润渐理论和热平衡原理，提出了接地面全熔化条件下冰面轮胎摩擦力的预测模型。

Based on the theory of hydrodynamic lubrication , micro-robot dynamic Simulation system model is built in the paper . The software system of simulation is developed by using MS VC + + 6.0 and OpenGL .

提出了根据流体润滑理论，建立了微型机器人仿真的系统模型，采用VC++6.0和OpenGL开发了三维动画仿真系统。

Based on the theory of hydrodynamic lubrication , the numerical analysis of the floating ring journal bearings ' working mechanism was investigated theoretically . The relations of its structure and performance parameters were described by equations .

在流体动力润滑理论的基础上，进行了浮动套滑动轴承的工作机理及结构参数与轴承性能关系的研究。

According to the theory of fluid lubrication , this article derives the optimum oil film conditions of the minimum power loss of the static bearing of the connecting rod bushing of planet hydraulic motors .

本文根据流体润滑理论，推导了星形液压马达连杆瓦静压支承的最小功率损失的最佳油膜条件。

In this paper , according to the research status of main bearings and connecting rod bearings , many aspects of research bearing lubrication were analyzed . In addition , this paper systematically expounded the theory of hydrodynamic lubrication .

本文从国内外内燃机主轴承及连杆轴承的研究现状出发，多角度分析了轴承润滑的研究内容，系统阐述了流体动压润滑理论。

The basic theory for analysis of lubrication failure is presented .

给出了润滑失效分析的基本理论。

Establishing the calculating formula of rolling bearing with the theory of elasto hydrodynamic lubrication

用弹性流体动力润滑理论建立滚动轴承的计算公式

Theory of thermal elastohydrodynamic lubrication for helical gears

斜齿圆柱齿轮的热弹流润滑理论

This paper studies the mechanism of a new type of liguid viscous braking according to the basic theory of fluid dynamic lubrication .

本文依据流体动力润滑的基本理论，研究了新型液体粘性制动的机理。

The calculation of elastic hydrodynamic lubrication on the involute straight bevel geartransmission is analysed systematically by using the theory of elastic hydrodynamic lubrication .

用弹性流体动压润滑理论分析了渐开线直齿圆锥齿轮传动的弹流计算，推导出相应的计算公式并给出了形成弹流润滑的条件。

The lubricating condition of Spiral Conical Dispenser has been analyzed and introduced the advanced technology and the development of the theory of the centralized lubrication system as well in the paper .

本文对国内外出灰机的润滑技术现状进行了分析，同时介绍了目前集中润滑系统的技术和理论现状。

Based on operation state and characteristic of the cam driving system , the surface lubrication is analyzed with theory of elastic hydrodynamic lubrication . United equation is synthesized to calculate oil film thickness of cam .

根据凸轮传动系统的工作状态及特性，运用弹性流体动力润滑理论对其进行分析，综合得出了凸轮油膜厚度的统一计算式；

Based on the theory of fluid hydraulic lubrication , lubrication mechanism of plunger seal friction pair in plunger pump is studied . During the discharging and sucking course the friction pair is lubricated by forced oil and working pressure .

根据流体动压润滑理论，对柱塞泵柱塞密封摩擦副的润滑机理进行了理论分析，即在泵的排出行程由强制性润滑油润滑，泵的吸入行程由工作介质润滑；

Research on the Benefit and Theory of Saving Energy by Lubrication

节能润滑的效益和理论的探讨

The advantage and shortcoming of vacuum hydrostatic guideway is analyzed on the base of the theory and application of gas lubrication in this paper . the working principle and problems which should be considered in design is introduced .

本文在论述气体润滑原理及其应用和发展概况的基础上，分析了空气静压导轨的优缺点及改进措施，介绍了真空吸浮型空气静压导轨的工作原理和设计中需要考虑的问题。