standard penetration test

美 [ˈstændərd ˌpenəˈtreɪʃn test]英 [ˈstændəd ˌpenəˈtreɪʃn test]
  • 网络标准贯入试验;标准贯入测试
standard penetration teststandard penetration test
  1. Application of Standard Penetration Test and Influence Factor of Number of Blows

    标准贯入试验的应用及贯入击数的影响因素

  2. Analyze Problems about Standard Penetration Test

    关于标准贯入试验问题的分析

  3. The Study of Examination Effect of the Drilling Technology to Standard Penetration Test

    钻孔工艺对标准贯入试验影响的研究

  4. Practical analysis and study of formula for computing value of index on standard penetration test

    对标贯试验指标取值公式的实例分析与探讨

  5. Contrast Analyses Of Standard Penetration Test And Heavy-duty Dynamic Sounding Test

    标准贯入与重型(2)动力触探试验成果的对比分析

  6. Statistic Relationship Between Standard Penetration Test Blow Count and Parameters of Sandy Soil

    标准贯入试验击数与砂土参数间的统计关系

  7. To Prospect Engineering Geology with Standard Penetration Test

    浅谈利用标准贯入试验进行粉、细砂层工程地质勘察

  8. Contrasting Standard Penetration Test with Ultrasonic Wave Test In-site Tests

    标准贯入与波速在原位测试中的对比分析

  9. Pile shaft capacity and main factors are tested by standard penetration test and sit core test .

    用标准贯入试验和现场取芯试验可以有效地检测粉喷桩桩身强度和主要影响因素;

  10. Discussions on standard penetration test in rock-soil engineering survey

    岩土工程测试中的标准贯入试验法

  11. The view-point of the correction of rod length for standard penetration test

    标准贯入试验中杆长校正的一点看法

  12. Application of Standard Penetration Test ( SPT ) in Hydro-power Projects in Sudan

    标准贯入试验在苏丹水利大坝勘察中的应用

  13. Calculating jacking resistance of jacked pile by using beating counts of standard penetration test

    利用标贯击数估算静压桩的沉桩阻力

  14. The stratum ranges that suitable for standard penetration test and heavy-duty dynamic sounding test are different .

    标准贯入与波速测试在工程勘察中都是较重要的原位测试手段,应用广泛。

  15. The application of standard penetration test is expounded and the various influence factors and correction coefficient of number of blows are analyzed in the paper .

    阐述标准贯入试验的应用,并分析贯入击数的各种影响因素及修正系数。

  16. Each kind of boring method has the different effect on the original state of silty sand , so the standard penetration test value N obtained are certainly different .

    各种钻探方法对粉细砂层原始状态的影响不一,获得的标贯N值有一定差异。

  17. The results of test show that it is linear relationship between the ground bearing capacity calculated by pressuremeter test and standard penetration test ( SPT ) .

    试验结果表明:由旁压试验结果推求的地基承载力与标准贯入击数具有良好的线性关系,随着标贯击数N63.5的增大,土质较硬的地基的承载力增长的幅度小;

  18. The standard penetration test ( SPT ) of base-pile of the artificial bored pile is very essential according to the feature of this project .

    根据本工程实例情况,人工挖孔桩桩底标贯试验是非常必要的。

  19. In this paper , conclusions are drawn after the analysis of effects of testing on control of soft foundation of Xuzhou Guanyin Airdrome 's runway by means of standard penetration test .

    对徐州观音机场跑道软土地基处理后的效果,采用标准试验方法进行检测并进行分析,得出检测结论。

  20. It is firstly suggested that based on practical experience in investigation , we estimate accurately its physical mechanic property and bearing capacity of foundation further combining load test and dynamic sounding or standard penetration test .

    首次提出采用荷载试验及动力触探或标准贯入试验相结合,并结合在勘察工作中的实际经验,来准确评价风化红层的物理力学性质,进而准确的评价其地基承载力。

  21. Based on the related literatures and data , combining with case histories , this paper discusses the correction method of the blow counts N of the standard penetration test . Concrete suggestions of correction are presented .

    本文根据有关文献资料,结合工程实例,对标准贯入试验击数N值的修正方法进行了讨论,并提出了具体修正建议。

  22. In addition , the quality test methods in treatment of liquefied foundation , such as loading test method and standard penetration test which are conventional methods applied in industrial and civil construction engineering , are limited in highway engineering .

    另外,对液化地基处理后的质量检验方法,在工民建工程中应用的常规方法(如载荷试验法,标准贯入试验法等)在高速公路应用中受到限制。

  23. The data measured from standard penetration test , static cone penetration test and surface wave test are used to evaluate the effective influence depth , the strength of soils , the increase of foundation modulus and the influence to surroundings .

    并通过标准贯入试验、静力触探试验、面波测试等测试手段,对冲击碾压的加固深度、土体强度与地基反应模量的增长以及对周围环境的影响等进行评价。

  24. The standard penetration test result is close to the consolidation test result . 4 、 The stress distribution forms which got by common used methods , i.e. Proportional Stress method and Uniformly Distributed load method , were different form the real one .

    室内试验的压缩模量与标准贯入试验确定结果最为接近。4、现行确定基底应力的均布荷载法与比例荷载法所得到的应力分布形式与实测的分布形式有出入。

  25. Compaction of sand and cement mixing pile composite foundation pile-soil stress is relatively small , generally less than 1.5 , through the standard penetration test and hearing board test , experiment the reinforced foundation bearing and liquefaction resistance .

    挤密砂和水泥搅拌桩复合地基的桩土应力比较小,一般小于1.5。

  26. Four groups of site contrast tests are chosen to conduct the systematic site soil tests including the plate load test , spire plate load test , flat dilatometer test , standard penetration test and static cone penetration test .

    选定4个研究场区地基土,进行现场系列原位土工试验,即平板载荷试验、螺旋板载荷试验、扁铲侧胀试验、标准贯入试验、静力触探试验;

  27. Through the standard penetration test ( SPT ) the plug behavior of PHC piles in silty sand and the influence to the characteristics of the soil around PHC pile by driving or jacking methods are studied .

    采用现场标准贯入试验,分析了粉砂土中PHC管桩的土塞特性、不同沉桩方式对桩周土力学性能的影响。

  28. This paper introduced the correlations between the cone resistance p_s value of the static cone penetration test and the measured number of percussion N_ ( 63.5 ) of the standard penetration test in Shanghai typical strata .

    文中介绍了上海地区典型地层的静力触探比贯入阻力p(?)值与实测标准贯入击数N(63.5)的相关关系。

  29. Instead , they are usually estimated by empirical formulas , which are usually functions of parameters from standard penetration test , cone penetration test or site wave velocity test . Empirical formulas based on the standard penetration test value are especially common .

    这些经验公式通常以标贯试验、静力触探试验、现场波速试验等参数为指标,其中以标准贯入值为指标的经验公式应用较多。

  30. Correlation analysis of CPT parameters and physical and mechanical indexes of subsoils , empirical formulas eduction between CPT parameters and subsoil specific weight , modulus of compressibility , blow numbers of standard penetration test and shear wave velocity .

    研究静力触探参数与地基土物理力学指标的相关分析,得出经验公式,包括静力触探参数与地基土的重度、压缩模量、标准贯入击数和剪切波速的相关经验公式;