sprocket wheel

A Study on the New Tooth Form of the Sprocket Wheel

链轮新齿形的研究&大圆弧渐开线齿形

Sprocket wheel 's process method was analyzed , and series sprocket wheel 's milling cutter was designed .

本文分析了链轮加工的常用方法，设计了专用链轮铣削刀具。

Development of Object-oriented CAD System for Disk Cutter of Sprocket Wheel

面向对象的盘形链轮铣刀CAD系统的开发

And analyze the contact strength of the roller and sprocket wheel while in meshing process .

分析链条和链轮啮合时，链轮和滚子的接触强度。

Remove drive plate and sprocket wheel .

拆下传动盘和链轮。

Heavy Scraper conveyor is a coal mine transportation equipment , Sprocket wheel is an important drive components .

重型刮板输送机是煤矿井下的主要运输设备之一，链轮是刮板输送机的重要驱动部件。

Solid Edge-based Accurate Design and Manufacture of edge shape of Cutters Used to Machine Sprocket Wheel Hobs

基于Solidedge的链轮滚刀加工刀具刃形的精确设计与加工

The Design of Slicer 's Sprocket Wheel Cutters

刨煤机链轮齿面加工系列刀具的设计

The curvilinear shape of sprocket wheel is the main cause of arching phenomenon of sintering pallets in the return rail .

链轮齿板的曲线形状是造成烧结机台车在回车道上起拱的根本原因。

The method of the sprocket wheel techno-parameter is researched . The configuration and characteristic are analysed . The sprocket wheel system fits the whole design requirements of loading machinery .

介绍了YMZZJ型淤煤装载机链轮系统技术参数的选取，结构组成与特征等设计和分析过程，该链轮系统（包括输送链轮组与传动链轮组）不仅能够完全符合该装载机整体设计要求。

The new tooth form of the sprocket wheel proposed in this paper is a large circular arc involute tooth form which is hobbed with linear edge hobbing cutters .

本文提出的链轮新齿形，系用直线刃替代圆弧刃作为链轮滚刀的原始齿廓，从而获得大圆弧渐开线齿形，简化刀具的设计与制造。

Further more , based on I-DEAS 9.0 , the contact strength between the roller and sprocket wheel and the contact strength between the shaft plug and sleeve parts has been analyzed while in meshing process .

并且基于I-DEAS9.0软件分析了链条和链轮啮合时链轮和滚子的接触强度及销轴和套筒的接触强度。

Hence , two kinds of teeth space arranged alternately and the even number of teeth are determined for the sprocket wheel according to the interval changed wheelbases of the rolling wheels in the pallet cars .

因此，根据台车列辊轮轮距的交替变化，确定了星轮相隔布置的两类齿距，以及星轮的齿数是偶数。

Based on the contact analysis on the connecting shaft by ANSYS software , the stress distribution between the connecting shaft and the spindle of the back sprocket wheel , the radial stress distribution and the contact pressure distribution of the connecting shaft were received .

采用ANSYS软件对联接轴进行了接触分析，得到了尾部星轮主轴与联接轴的应力分布、联接轴的径向应力分布以及接触区接触压力分布情况。

Power from the decelerating gearbox directly give to driving axle , which drives the primarily sprocket wheel of cutter and driving pulley of conveying belt at the same time , that realize the organic combination of conveyer belt and cutter operation .

动力由减速器减速增扭之后直接传给驱动轴，驱动轴同时驱动输送带主动带轮与切割器主动链轮，实现了输送带和切割器工作的有机结合。

By analyzing the mechanics relation between the sprocket wheel and the pallets of the pallet draught device in a sintering machine , the non-arching mechanics model of the pallets was established and the force control method for the non-arching sintering machine was put forward .

通过分析带式烧结机台车执行牵引装置的星轮和台车的力学关系，建立了台车无叠肩起拱的力学模型，提出了无叠肩起拱带式烧结机的力控制方法。

Besides while uses special become shape cutting tool time , still can process sprocket or ratchet wheel .

此外当使用特殊成形刀具时，尚能加工链轮或棘轮等。